2007 dodge ram radio removal/install
Вставка
- Опубліковано 6 жов 2024
- Watch to see how to remove the factory radio out of this 2007 dodge ram and install a double din headunit
The black version dashkit I used was the 95-6528 amzn.to/3edMOoE
Pac wire harness www.jpsaudio.c...
antenna adapter www.jpsaudio.c...
Parking brake bypass www.jpsaudio.c...
🔻
WHAT TO WATCH NEXT:
WHICH WIRE HARNESS SHOULD YOU BUY FOR YOUR CAR: • which car stereo wire ...
HOW TO SAFELY TAP INTO YOUR CAR FUSEBOX: • HOW TO SAFELY TAP INTO...
HOW TO WIRE A RADIO: • Car stereo wiring harn...
HOW TO STRIP A WIRE • How to strip your wires
HOW TO PLAYIST: • how to
🔻
Want to support the Channel? Join me on Patreon and get exclusive content and GIVEAWAYS
www.patreon.co...
🔻
Phone I Use to record with
Samsung Glaxay 10e amzn.to/2SiKVKI
~Check out my first channel if you love BASS~ / jpsaudio08
~Tools I Use almost everyday~
Install bay panel removal tools: amzn.to/2Jv4XiP
Install bay Speaker tester amzn.to/2LHOYki
Digital Multimeter: amzn.to/2Hcz111
Milwaukee drills: amzn.to/2Lxvu1y
The moment you said "CUT" ended that. Those Bezels are EXPENSIVE!
Thanks for the video, inside of my truck has an identical dash cover and I was having a problem finding a decent cover-plate. I'm going to go look for the one you used. Great video! Short and to the point!!!!
Glad I could help
Great video. Thank you. No one ever posted how the face plate actually works!
Thank you glad I could shine some light on it
In my 2007 Dodge Ram , when i had the Double Din installed I found it easier to replace the whole front panel . If I’m not mistaken I purchased it off EBay for $200+ or -
Dude, what about the wiring?
I know, i was trynna verify my connections lol
I had to plug my power wire into the cig lighter ...harnish don't have power in it
what about the wiring?
How did you connect your steering wheel controls? What did you use?
Thanks for this install. I'm going to do it tonight.
Very Good,,,I just did the same install and it was exactly the way you described But my radio bezel came black so i might paint it to match my dash cause it is the same as yours, Silver. Great Video
glad i could help
@@jptheinstallguy how did u get silver
Boogoti KIRB he said it was a option as a custom order
@@evanshireman5644 custom order from metra?
What wire did you use for the switched hot and what wire did you use on the back for the car install?
Nice! I was looking into getting that same radio but one question? Can you see music videos on that radio specifically?
they make a kit where you still have a smaller pocket BUT it only comes in black bezel trim..not silver. hmm if I can save part of that pocket I would if it came in silver...one said just spray pain it silver...but would it blend in enough
Anyway to see how you did the wiring? I can’t get my aftermarket stereo to turn on.
Yeah. Wouldve gotten 5 thumbs up if you showed how you wired it all up.
Wiring harness would be the way to go. The wiring harness plugs into the stock connections. The only thing you have to do is color match the radio harness wires to the wiring harness. This eliminates cutting wires on the truck side. If you wanted to sell the truck, but reinstall the stock radio first, you'd simply unplug the aftermarket radio and plug the stock back in. (Removing the fact that your dash panel was modified for the new radio.)
Thank you for this great video im shore when I put my new radio in i will have no problems thanks to you so keep on teaching bro. Peace out
💯💯 thanks man ill keep them coming
Got a link for the silver?
www.amazon.com/Silver-Double-Install-Wiring-Harness/dp/B01KKC0VPQ/ref=sr_1_21?crid=V8KO2355HZGU&dchild=1&keywords=dodge+dash+kit&qid=1621879623&sprefix=dodge+dash+kit%2Caps%2C267&sr=8-21
Where did you position The Back-up Camera
What type of radio is it ??
where did you get the Silver bezel cover coz I call the company and they dont have it in that color
How do you match the stereo? Any stereo work?
What size is the stereo?
Do you need an special harness for the aftermarket stereo like an amp bypass harness
What head unit was used? It fits perfectly
Please what is the link to the stereo system i have a 07 dodge same truck cant really find one !???
Where did you buy the frame?
Hey I have an 07 as well and have bone stock model.. No steering controlled controles or anything. How do I instal without the interface?
Thank you! That was fast and easy.
Looks awesome I'm going to get that and ya did a great job
Great video, can you write the specific wiring harness you used
Just search for a radio wiring harness for your year model truck. Match the radio wire colors to the harness colors. Once the harness wires are attached to the radio wires, you plug the harness connector to the truck radio connector that you disconnected from the stock radio. There is no wire cutting/splicing on the "truck side" of the project. It's plug and play. If you ever want to put the stock radio back in, disconnect double din radio and plug the stock back in. That's excluding that you modified the dash panel though. You can buy the dash bezels already squared or for double or single din radios. you just have to move cigarette lighters and ac/heat vents over to the bezel. Put the stock one in the attic if you want to reinstall stock radio later to sell the truck (if you wanted to keep the double/single din radio). 😁
Do they make one with the carbon fiber faceplate? My 07 Sport has the carbon fiber trim.
i dont know i think its just silver and a matte black if anything they may have a gloss black
What are the lift dimensions on this truck? Im looking to get mine lifted about the same height.
What size radio???
What about the wiring video for this dodge.
Heyy um I’m doing that to my truck too but I cant find the cover that u got can you tell me what it’s called
What is that plastic called I got the same truck but I can’t find that pice
I’ve bought this radio and a metra interface and installed it last night but the radio does not shut off with all the other accessories and just stays on
What back up do you recommend.
I’ve looked everywhere for the silver dash kit but I can only find the black one. Is there a link you could share? Or did you contact them directly?
Same...
I ordered the same kit but placing it over the radio before the install looks like it's gonna set back from the edge
Did you paint match that face plate?
No sir. It came painted already color matched
What is the name of the company that you got the dash radio from ?
Metra
I'm Doug Dubbahdin of the Dimmsdale Dubbahdins.
What’s the radio model ?
Not sure it was a cheap boss radio I think
hey man, litterally bought the same radio and same size and all with the same dash kit. did you do anything to make the radio come through the dash kit more? i feel like my radio sits back behind the dash kit a little too much
Thank you!
anytime
Nice job.. Im gettin mine done soon.
What size was your double din? 6'2 or 7in?
6.2
Good job!
thank you
With what did you cut it
The dashkit you listed is black.Is there a silver one?
95-6528 is a silver one.
How do u find the bevel in silver amazon shows black
A man within the first minute you said drop a pocket and there's two screws which part did you drop and how did you drop it you just show the part already laying on the ground I'm sorry I don't understand
What'd you use to cut the trim?
An air saw
Where are you located?
Can’t find it in silver. Clicked the link and it’s the black one how do I order silver
Sergio Pacheco following.
95-6528 is the silver plate
So that Metra trim fits 6.2 inches screen?
any double din i think. 6.2 to 7 inch just not the oversized radios
Nice, it's adjustable? Thanks for a quick reply..
got links?
yes I will put them in the description but here is the link to the dashkit
amzn.to/2yrnGok
where is the gray faceplate? i looked everywhere for it!!
i have a dealer account here in birmingham al i could ship it to you or you can go to like a local car audio shop and buy one. might be easier
@@jpsaudio08 no link? cant believe its not as easy as a quick google search but no one can find it in silver
95-6528 is the silver plate
Where can I buy that silver panel?
Man to be honest the customer brought that dash to me and I've been searching for it since I put the video out. Once I find it I'll definitely link it.
What tool did you use to cut and trim?
a dremmel tool
How much do you charge for install like this? I wonder if I am charging too low
100 bucks video units includes Bluetooth run and any dash modification.
JPtheinstallguy I need to charge more 😂
@@djwhiz03 lol yessir my shop labor is 75 an hour
@@jptheinstallguy you both need to charge more
What's the name of the stereo you have?
This was a planet audio radio I cant remember the model number
Buy the full panel setup dont dick with this cheap kit you'll regret it if you go to a 7" style double din later on or a halo etc
I guess he forgot to show the wiring harnesses for both radios.
who makes the face plate?
barbra falkstein Metra
metra
@@jptheinstallguy cant find the silver faceplate any where
Next time you make a video...SHOW YOUR WORK...how tf you gonna skip the installation part
well if you look in the cards you will see i made a video on how to wire up a radio which is the same for every application. To make the videos efficient i go over how to remove the factory and do any type of modification to make your radio fit. for those who know how to install you dont have to skip through anything to see what the end product is suppose to look like and for those that dont i made a video showing what all wire colors mean and what they do and how they should be installed. also that way i dont have to go over the same part everytime in the video i got over 100 of these to help people out
having to do all this shit just makes me want to sell this piece of shit ram
What size was the stereo
This was a 6.2 inch screen double din