Holy cow u r the best I have been looking for the way to activate the throttle control but nobody can tell till I saw your posting…thx you n I will follow u…god blessed
Hello i was wondering if you can change the throttle speed so i can change it from 25kmh to 6kmh and can you please make a video about it. I am a follower btw
I don’t understand why the user manuals to these bikes don’t tell us this? I thought mine was broke until I had to dig for this information. Thank you 😊
Because the bike is also sold to EU and there is should be restricted. The advanced settings and unlocking is not for everyone as there are a lot of pople changing other settings they should not ending in getting an nonworking bike or killing the battery.
it means that I blocked the throttle by mistake because it wouldn't start, now it works, thanks for the video, I was about to disassemble the bike, I was lucky with your video
Greetings, and thanks for your guide! My son unlocked his Engine X but now I can not reverse it back to EU standards. When trying, the display is not blinking "22" but "25" - do you know what to do there?
Thank you i was going nuts i just bought the enguie m20 and its a newer version has an assisted start ,comes with a proper uk plug now lol etc for a while i thought they had made it peddle assist only to comply better with UK laws 🤬
Great video, thank you! I have the Engine X, is there a plastic folie on the screen of the controller when the bike is new, or is the screen just not great?
Hello @TechTronic9000, thank you for your tutorial, it's worked fine. But now after some weeks, I tried to do the same manipulation to deactivate the throttle without success... Any solution ?
Hi i’ve found it hold plus and minus together for a minute until screen changes then press and hold the plus until it changes again. i don’t remember what it says but you’ll know..
You were saying on the last video of this bike that it can go up to 1000W. Can you do a video on it going up hills and stuff please as I'd be very interesting in this bike as it actually 250w bike
@@TechTronic9000 - Thanks for the great reviews, I'm subscribed. I would like to know: how the Engine X performs going uphill locked to 250 watts, speed limit 25kph and the throttle not engaged; how it does uphill with the speed unlocked and then with both the speed limit unlocked and the throttle enabled. I would prefer not to unlock it from it's factory default settings. However, I am 17 stone and live in a hilly town so am concerned that the factory settings might not be good enough for me.
I have an engwe l20se got the same display. Wondering if you know this display if faulty as I charged my battery fully but it only shows one green bar, when using my bike the battery meter flashes telling me no more charge! The bike keeps working on throttle and pedal assist. Please help with your thoughts
I have a question. I managed to activate the throttle but I could only achieve 7km/h. After a lot of internet research I found a way to get maximum performance by pressing the + and - buttons together for about 30 seconds. The problem I now have is that I get maximum power at all of the assist levels and no matter which gear ratio is selected, so it's very difficult to control. How do I adjust each assist level individually?
Hi tech, i just got engine x and ive done everything you said to do but the throttle wont activate and the speed limit won't increase or decrease, i would appreciate some help if you can. Thanks love your channel.
@@TechTronic9000 hi tech, thanks for getting back to me I can get into the speed limit setting but it won't increase or decrease and the throttle is restricted to 6kmh, its a new bike and the original lcd.
I can see on your other video that it can be unlocked tonanmax of 60 kmh. Which could also be 45 kmh. But is it possible to adjust the throttle to a certain speed, let's say assist to 25 kmh, even though the bike can go the 45 kmh?
The bike has default 5 electric "gears", each as a speed and power ratio limit, so 1st gear is ~10km/h, 2nd is 18km/h, 3rd is 25km/h, 4th is 35km/h and 5th is unlimited. So both assist & throttle is limited to the gear ratio. The throttle is also fully proportional so on 5th gear you can ride it from ~10km/h up to maximum of 45+km/h. You can see a lot more details about this in my full review about this bike. Just look it up my channel.
It didn't work well, I have a limited speed to 8 kilometers per hour and I tried all the ways, nothing worked, not even unlocking the speed limit, can you help me? I have a European version
Do you know if this can be actived / deactivated while rolling mid ride incase I get pulled over, then it can be easily turned off while coming to a slow stop
Hello I need your help Problems with advanced settings When I hold down the - and i button at the same time the screen flashes and just goes back to the main menu, I can't access the advanced settings please help
I only have the regular C20 (non pro) and I don't know how and if it's possible to unlock your model as it has a different controller and it has a display.
It didn't work well, I have a limited speed to 8 kilometers per hour and I tried all the ways, nothing worked, not even unlocking the speed limit, can you help me?
That is just the LCD model, what it is displayed it's actually embedded in the LCD controller and in the bike controller. In short it's not possible on this model.
Bought the same bike Engwe Engine x last week and the throttle is already working up to 6/7 kilometers but no way i can set the speed up to 60 kilometer...its just staying at 25 km
hi,question please for cruse control, i deactivate the little heart logo on the display, but it not work really, if i hold the throttle at mode 5 high speed electric mode only more than 3-4 sec, the cruse is always on, i need to push rear brake 1 time for deactivate , if someone finds a way to deactivate completely cruse control come here to tell us , it's not that little heart logo that changes anything, whether it's on or not
As many others i get error 5 ,my seller says this is normal and throttle doing 3.6 mph only and not working is normal!my engwe pro 2 only working on pedal asist is normal !.
The display and controllers change as models advance, so does the unlocking procedure. For the Engine PRO 2.0 is this one ua-cam.com/video/VH563oAUgik/v-deo.html
If you have the X model then is like in this video (and the other one related tot this), you just need to restrict it back to 25km/h and disable throttle.
Can you please make a new one the software changed and I get error 25 instead of error 22 when activating throttle. And when I try to remove the speed limit the 25 won’t go up 😢
Is there anyone else than me getting the error 5 when i'm trying it, instead error 22 (my brakes work perfectly by the way)? Tell me if you found? something;)
It might be a newer bike version with a newer display & controller. You can check my newer videos for the PRO 2.0, L20 Boost, they have different unlock method now.
Thank you very much for this vid. I already almost broke my mind in attempting to understand how to enable it on Engwe C20 Pro (in the same manner, btw). Thank you!
@@TechTronic9000 Yes it works for C20 Pro. I was sent your video from Engwe Support directly. The only difference with C20 Pro is that the display does not show "ERROR 22" when holding throttle+brake. But after doing the steps the throttle will still be unlocked.
Is there anyone else than me getting the error 5 when i'm trying it, instead error 22 (my brakes work perfectly by the way)? Tell me if you found? something;)
It might be a newer bike version with a newer display & controller. You can check my newer videos for the PRO 2.0, L20 Boost, they have different unlock method now.
Holy cow u r the best I have been looking for the way to activate the throttle control but nobody can tell till I saw your posting…thx you n I will follow u…god blessed
I'm glad you have found my video useful. Don't forget to subscribe. Thanks!
Hello i was wondering if you can change the throttle speed so i can change it from 25kmh to 6kmh and can you please make a video about it. I am a follower btw
can you disable it on engwe engine pro?
I don’t understand why the user manuals to these bikes don’t tell us this? I thought mine was broke until I had to dig for this information. Thank you 😊
Because the bike is also sold to EU and there is should be restricted. The advanced settings and unlocking is not for everyone as there are a lot of pople changing other settings they should not ending in getting an nonworking bike or killing the battery.
Because government doest want you to have fun.
it means that I blocked the throttle by mistake because it wouldn't start, now it works, thanks for the video, I was about to disassemble the bike, I was lucky with your video
I'm glad that you have found my video useful!
i was struggling to find why the throttle was not working on my x24, ty so much for this !
I'm glad it was the video that you were looking for. I hope you have also subscribed.
Greetings, and thanks for your guide!
My son unlocked his Engine X but now I can not reverse it back to EU standards.
When trying, the display is not blinking "22" but "25" - do you know what to do there?
THANK YOU!!! I was so frustrated with the new ebike I got and couldn't find a way to fox it! Now it is as I wanted it to be!
Happy to help. Thanks for watching.
Thank you i was going nuts i just bought the enguie m20 and its a newer version has an assisted start ,comes with a proper uk plug now lol etc for a while i thought they had made it peddle assist only to comply better with UK laws 🤬
Thank you, nice clear, easy to follow instructions, unlike most others. I have subscribed and look forward to tailoring my new bike to my needs.😊
Thank you, I'm glad that my video was useful.
Great video, thank you! I have the Engine X, is there a plastic folie on the screen of the controller when the bike is new, or is the screen just not great?
Great video. I tried this on my Engwe E26 and it worked perfectly. Thanks
Glad it helped! I hope that you have also subscribed.
Thank you it worked on my M20!! Getting to work has just become a breeze :D
Hello @TechTronic9000, thank you for your tutorial, it's worked fine. But now after some weeks, I tried to do the same manipulation to deactivate the throttle without success... Any solution ?
Try it with only holding the brake lever.
Do you know if there's a setting or way to shut off the cruise control?
I get error 5
The same for me! Did you find a solution?
Error this way and the other way too.
Hi i’ve found it hold plus and minus together for a minute until screen changes then press and hold the plus until it changes again. i don’t remember what it says but you’ll know..
Thanks you l!!! This worked exactly how you showed it. FYI I’ve got a EP Pro 2
I'm glad you have found my video useful.
Do you know the torque rating on the engine x motor?.... thanks for very informative videos!.
It's somewhere in the 50-85Nm range.
You were saying on the last video of this bike that it can go up to 1000W. Can you do a video on it going up hills and stuff please as I'd be very interesting in this bike as it actually 250w bike
Are you interested in 250W / limited performance going uphill or when it's unlocked to full speed / power?
@@TechTronic9000 I would love to see a video where you compare the Locked and unlocked. Just a video idea
@@TechTronic9000 - Thanks for the great reviews, I'm subscribed. I would like to know: how the Engine X performs going uphill locked to 250 watts, speed limit 25kph and the throttle not engaged; how it does uphill with the speed unlocked and then with both the speed limit unlocked and the throttle enabled.
I would prefer not to unlock it from it's factory default settings. However, I am 17 stone and live in a hilly town so am concerned that the factory settings might not be good enough for me.
Please do this.
Videos uphill
Limited and unlimited.
how do you enable the speed limiter on ep 2 pro eu version . beacause i made it to drive 50 but how do i turn it back?
I have an engwe l20se got the same display. Wondering if you know this display if faulty as I charged my battery fully but it only shows one green bar, when using my bike the battery meter flashes telling me no more charge! The bike keeps working on throttle and pedal assist. Please help with your thoughts
I have a question. I managed to activate the throttle but I could only achieve 7km/h. After a lot of internet research I found a way to get maximum performance by pressing the + and - buttons together for about 30 seconds. The problem I now have is that I get maximum power at all of the assist levels and no matter which gear ratio is selected, so it's very difficult to control. How do I adjust each assist level individually?
Same scenario here
Hi tech, i just got engine x and ive done everything you said to do but the throttle wont activate and the speed limit won't increase or decrease, i would appreciate some help if you can. Thanks love your channel.
It should still work, is it the same LCD model on your bike?
@@TechTronic9000 hi tech, thanks for getting back to me I can get into the speed limit setting but it won't increase or decrease and the throttle is restricted to 6kmh, its a new bike and the original lcd.
Thank you so much. I was worried and not now.
Glad I could help
Thanks alot because I have problem same and I go many technations they didn't know and your video help me thanks
Happy to help
I can see on your other video that it can be unlocked tonanmax of 60 kmh. Which could also be 45 kmh. But is it possible to adjust the throttle to a certain speed, let's say assist to 25 kmh, even though the bike can go the 45 kmh?
The bike has default 5 electric "gears", each as a speed and power ratio limit, so 1st gear is ~10km/h, 2nd is 18km/h, 3rd is 25km/h, 4th is 35km/h and 5th is unlimited. So both assist & throttle is limited to the gear ratio. The throttle is also fully proportional so on 5th gear you can ride it from ~10km/h up to maximum of 45+km/h. You can see a lot more details about this in my full review about this bike. Just look it up my channel.
Hi, i have c20 pro and i activated throttle as you did but the speed with throttle is only 6km. What could be the problem
hi i have the ep-2 pro (same display and controls) and got the same issue. did you find a solution?
I'm having same issue
Just got my E26 bike but when I try this method of throttle activation it only activates the walking speed of 4mph.
It didn't work well, I have a limited speed to 8 kilometers per hour and I tried all the ways, nothing worked, not even unlocking the speed limit, can you help me? I have a European version
I have the same problem. Any luck getting it fixed?
Hello, can you disable the accelerator on the C20 Pro bike?
I don't know for the C20 pro. If it has a yolin display then it might work.
How do you turn up the sensitivity on the throttle? Is there any way to get rid of the delay in the throttle?
There is no option for that.
Hello I was wondering if you can remove the throttle from the bike? Is this possible
I think it's possible. You should first disable it from settings, then you can unplug it and see if you get any error codes.
I would like to remove it fully on my ep-2 pro.. do you know how to avoid the E22 code?
How long can we ride on Engwe ep-2 pro ....I have 4000km+...should I sell it or not! Need fair opinions
It's all down to care and maintenance, if you keep the bike in good conditions it can work for a lot more time.
This is very helpful, thank you very much.
I'm glad it a useful video. I hope you have also subscribed ;)
Do you know if this can be actived / deactivated while rolling mid ride incase I get pulled over, then it can be easily turned off while coming to a slow stop
No, it can not be enabled / disabled on the go. Only stationary and only like in this video.
Thanks for that 👍
Does this works on RadPower Radrhino 6 plus
ami cuano quiero desbloquear el acelerador no me pone erron 22 me sale 25 y hay parametros que no deja ajustar o cambiar
Maybe it's a newer version and display / controller has changed.
It shows error when i do this. 22 is not appearing. It shows 25 and error
It’s really helpful today I did it same it works🙏thank you so much
Glad it helped
Hello I need your help Problems with advanced settings When I hold down the - and i button at the same time the screen flashes and just goes back to the main menu, I can't access the advanced settings please help
You need to hold o + and - not - and i
Is there anyway to set it to where it only goes to 6km to go along with eu laws??
Yes, disable the throttle and use the "-" button for 5-6km/h walk assist mode.
The motor says 250W on the C20 Pro but they say it is actually 500W. Do you know how to unlock this extra power?
I only have the regular C20 (non pro) and I don't know how and if it's possible to unlock your model as it has a different controller and it has a display.
It didn't work well, I have a limited speed to 8 kilometers per hour and I tried all the ways, nothing worked, not even unlocking the speed limit, can you help me?
Brilliant, thank you very much 😊
You're very welcome!
When turning on the bike you can see on the screen that there is an actual battery % next to the meter. Any idea how to turn that on??
That is just the LCD model, what it is displayed it's actually embedded in the LCD controller and in the bike controller. In short it's not possible on this model.
Hello, can you tell me how I can reset the bike to 25 km. Because it goes faster than 25. and how can I disable the throttle?
The same way as it is enabled, for the speed just put25km/h instead of high speed.
Can i put this display on my Engwe L20?
It **might** work, as both use similar motor controller and both use same brand Yolin display, but I'm not 100% sure.
@@TechTronic9000 Thank you. I will try 👌
I have the same engew x but it don’t work
There could be a new batch of bikes with new display & new unlock procedure.
Thank you very much,just the infor I was looking for!
Mine didn’t “show a change of pattern” when it was blinking 🤷♀️
Mine won’t disable any help
Try to hold only the brake level to disable the throttle.
Hi do you know how to disable the paddle assist?
select gear 0
Any idea how on to do this on the pro?? I want to disable the throttle and set the speed to 25km
Speed limit should be the same. Don't know if the throttle will work.
Bought the same bike Engwe Engine x last week and the throttle is already working up to 6/7 kilometers but no way i can set the speed up to 60 kilometer...its just staying at 25 km
Can you also drive the bike with disable throttle
Yes, with throttle disabled it works like a normal ebike.
Okay nice then i can drive it to my work because 1week ago the police give me a ticket that is was not cycleing
Hi , does anyone know here how to unlock the engwi engine x EU version? It gives me error 25 instead og
F error 22 😢
hi,question please for cruse control, i deactivate the little heart logo on the display, but it not work really, if i hold the throttle at mode 5 high speed electric mode only more than 3-4 sec, the cruse is always on, i need to push rear brake 1 time for deactivate , if someone finds a way to deactivate completely cruse control come here to tell us , it's not that little heart logo that changes anything, whether it's on or not
There is an option in the hidden advanced settings to disable cruise control.
I activated Trottle and bike only doing 8.8kmh in trottle mode?
Same. Did you fixed it ?
As many others i get error 5 ,my seller says this is normal and throttle doing 3.6 mph only and not working is normal!my engwe pro 2 only working on pedal asist is normal !.
The display and controllers change as models advance, so does the unlocking procedure. For the Engine PRO 2.0 is this one ua-cam.com/video/VH563oAUgik/v-deo.html
Thanks did the job 1st time ,under a minute ,thanks for black voodoo majic link.
I need help finding a solution to reduce power to 250W due to legal rules in the EU. Would you happen to know if this is a hidden option in the menu?
If you have the X model then is like in this video (and the other one related tot this), you just need to restrict it back to 25km/h and disable throttle.
Is it the same for T4?
I didn't have a T4 so can't advise you.
Can you please make a new one the software changed and I get error 25 instead of error 22 when activating throttle. And when I try to remove the speed limit the 25 won’t go up 😢
I haven't tested the new model yet so can't advise on how to do it.
It doesn't want to change or configure SCA for me
Спасибо. Сработало на “l20 se”
So when it should only be enabled when you are sure there's no police, right? Otherwise you could get fined i guess?
Depends on your area and laws ;)
Doesn't work on my Engwe EP2 Pro sadly, just tried it 3 times...
only for the X
Does this Bike come with this controller
Yes, it's the stock included one.
OMG TYSM IT ALSO WORKS OM MY EP2 PRO EU
Thanks, worked on c20 pro
Glad it helped
Thankyou very helpful 😊
I am in Ireland and its 250w motor.
Yes the Engine X is 250W rated, unless you unlock it ;)
@@TechTronic9000 how can I unlock it?
Yesterday my Enguie EP 2 Pro Upgrade Coming home And Thortle not working
Hé has an otter vis where he shows it on the engine x it works the same on the ep-2 pro
How to Start My EP 2 Pro Upgrade Throtle please guys tell mee 😔
thank you
You're welcome
Works!!! Thank you Thank you.
Glad it helped
Life saver!! Thank you
Happy to help!
I need to bay new display for a same model lake in video, model is no: 80C3620236Y040H
20220509B0716
TZ-2
Thank you!
You're welcome!
Plzzz help i can't turn trottle off plzz
Thanks
You are welcome!
What about engine pro?
It happens that I have the PRO also, I will do some testing.
@@TechTronic9000 I'd like to know the results of your testing or is it easy to just remove the throttle on the Pro? Thank you.
Is there anyone else than me getting the error 5 when i'm trying it, instead error 22 (my brakes work perfectly by the way)? Tell me if you found? something;)
It might be a newer bike version with a newer display & controller. You can check my newer videos for the PRO 2.0, L20 Boost, they have different unlock method now.
@@TechTronic9000 oh thanks! Maybe, yes it could be! I'll try and I'll tell you;)! Thank you!
Por favor, podrías explicarlo en español??
Use la traducción de UA-cam, seleccione el símbolo de engranaje, elija CC y luego traduzca automáticamente al español.
Doesn't work at my bike 😐
Thank you very much for this vid. I already almost broke my mind in attempting to understand how to enable it on Engwe C20 Pro (in the same manner, btw). Thank you!
Did it work for the c20 pro?
@@TechTronic9000 Yes it works for C20 Pro. I was sent your video from Engwe Support directly.
The only difference with C20 Pro is that the display does not show "ERROR 22" when holding throttle+brake. But after doing the steps the throttle will still be unlocked.
@@TechTronic9000 Yes :)
Hahaha, nice! Glad to know that!
Hahaha, nice! Glad to know that!
2024 models can’t be unrestricted
👍👍👍👍thanks.😎
It's dumb that you can't disable it by just turning off 😢
I would hate to enable each time when I start a ride
It doesn’t work for me i think im doing something wrong
Is it an X model or a PRO model? This only works for the X model.
@@TechTronic9000 How can you do it on a pro model then?
Is there anyone else than me getting the error 5 when i'm trying it, instead error 22 (my brakes work perfectly by the way)? Tell me if you found? something;)
It might be a newer bike version with a newer display & controller. You can check my newer videos for the PRO 2.0, L20 Boost, they have different unlock method now.