This no longer works for new models. Engwe gave me the instructions for unlocking the throttle and speed on my new engine x; "When the display is turned on, press and hold the "+ & -" button at the same time for 3 seconds to enter the setting interface. After releasing the "+ & -" button, press and hold the "+" button for 15 seconds to release the 6km accelerator limit and the 25km/h speed limit." Simple and immediately effective.
I watched another guy's video about how to increase the speed and remove the limiter but he said that after you picked the speed numbers that you wanted, you should turn off the bike and then directly on again for it to save the new settings. But it never worked, the speed was still limited to 25 kph. Now I know why it didn't work, you needed to press and hold the i button first, and then turn off the bike. Thank you so much, now I love my bike even more!
Setting the wheel diameter to 22 gets closer to the actual speed if not spot on. The miles are off so with ebike displays you either choose accurate mileage or speed which is controlled by the wheel diameter setting.
brother, you are my hero lol i used throttle on its own and it went to 36km for me... but when i was riding it was only 25km because of weight etc.... then i saw your video.... went to settings and speed limit showed 25km... put it to 60km... went to ride again. it went up to 40km. that's good enough. i just gotta lose some weight and it'll go to 45km and maybe more ... insha'Allah may Allah keep me safe
im planning to buy this one just because you can unlock the speed so easily, im not spending 1000+ euro on something i can do on normal bike for few hundreds.
@@TechTronic9000 Do you maybe know if there is a way to make like a system that for example: you click - 5 times and the bike goes to 25km/h? Also can you disable the throttle bar?
Hi! Is there any way to unlock the power without changing de speed limit? By doing the process that you hace explained here, have you noticed more power going up hills or only noticed a change in speed? Thank you in advance.
This works for the X, haven't tested if it works on others. But it also depends on the LCD & controller model. Usually the PRO model has another controller / LCD so it will probably not work.
Hi, i am looking at getting the Engine X to food deliveries on Uber/Deliveroo. If I unlock the motor so it can provide a throttle speed of say 17-20mph going up mixed terrain (flat and hills) how much distance/range would you say i could expect? Thank you
Hi Techtronic, Very good video by the way. I have a few questions, when you increase your speed limit to say, 30 mph will it kill the batteries quicker? I've noticed that my battery doest last very long when the speed is increased and using the throttle 70 % of the time. Is is it when you use the throttle by itself it kills the battery? Or is it better to use the pedal assist?
The display & controller only allows maximum unlock speed of 60km/h, but it has nothing to do with real speed under load. On some models you can set the limit to 99km/h and they will only do 28km/h top speed :)
The ENGWE EP-2 PRO has a Yolin controller, the code 25 is related to the brake sensors. Check the brake levers, brake electric cables, brake sensor plugs.
@@TechTronic9000 hey pal, so what is speed unlock? is this something different to what you just showed in this video? how can i make the EP2 PRO go faster? it only goes 25kmh at the moment
I have an engwe engine X i tried to unlock the speed and when i get into that menu the 25km speed wont move when i press the + button to increase it , not doing anything can you help me whats wrong do you know ?
ENGWE has updated their controllers & display so unlock methods have changed. You can try to watch some of my unlocking videos for the newer ENGWE models and maybe something will also work out on the X.
salut am acest model engwe engine x 250w fac toti pasi dar cand ajung sa schim de la 25 km nu se schimba nici mai mult si nici mai putin cum o pot deslimita ?
Depends on a lot of factors, flat out it draws almost 1000W. Still you can get 30-40km easy from it, using some assistance and lower speed will increase range a lot more.
@@TechTronic9000 And can you tell me how long it takes? I don't know about 45 km, but I think 25 km is too little, why do they give 25 everywhere, it's as if I was running at that speed
Hello, I want to ask if the Engine X bicycle is limited to 250 W only electronically and it can be limited both in power and in speed up to 750 W and more than 50 km/h, by pressing the commands that you show in the video. is that so???
The X when is unlocked it has up to ~1000W peak power, speed is unlimited and can be up to ~45-50km/h depending on weight, temperature, tire pressure, etc.
Thank you very much. I wanted to confirm it because in Europe it is a problem that the bicycle is not limited. Although it is recommended that it can be delimited on off-road terrain when one weighs about 100 kg.
@@TechTronic9000 please, how can I unlock the power to 750w without changing the speed limit? I think that is what I should do in order to go up in a hill easily, right?
Can you answer a question for those like me who are a bit dumb? The Engine X is 250w rated as standard yes? So by performing this unlock, does this increase the watt power rating?
The Engine X comes with a motor that can safely operate into 200-1000W range. The controller also can operate in two modes, limited 250W and fully unlocked which allows close to 1000W. So when you buy it for EU it comes locked and limited to 250W. By your own risk you can enable full power.
I dont get it why is it so easy changed up with a few settings if 250w is standard Eu. If a bike was stopped in this mode surely the bike that details 250w etc saves any hassle?
Can you please make a new one the software changed and I get error 25 instead of error 22 when activating throttle. And when I try to remove the speed limit the 25 won’t go up 😢
Follow this method for maximum speed. This video doesn't show you actually how to unlock it. Hold + - until TC screen appears. Then hold + for 15 seconds until screen changes. Then hold i to lock it in. This method took my bike up to 84km. Let me know how you get on.
It's a bit more complicated, the bike controller has a motor strength assistance table map. The power will be reduced when reaching the 25km/h thus you will not get full potential of it. Unlocking the speed will also set the motor strength to almost 100% (~around 1000W) and because you will not reach a limit it will use all that power. As when limited to 25km/h you do get more peak power when you are climbing a steep hill and you are slower than the limit.
In additional PAS settings is possible to adjust assist levels in percentage (up to 100% on highest level, 5-factory set to 96%) also max current in amps (according controller type - data on controller label)
I also got the 2024 version: Tuning: 1st: Turn the display on -> hold plus and minus (+ & -) just like he does first in the video. 2nd: Hold the plus (+) until it pops up with the unlocked speed and hold the (i) button so the display restart and enable the unlocked speed. Untuning: Do the same thing as you tune the bike, but this time it will reset the speed to EU regulations again.
No 24 Inc ok no 22 /24 Inc really 20+4 diamanter 24 ok no no 22/ok 24 my gps ok 65 kmh my ado a500watt battery 48/20amper Speed max gps 65.5kmh ok 24 Inc
This no longer works for new models. Engwe gave me the instructions for unlocking the throttle and speed on my new engine x;
"When the display is turned on, press and hold the "+ & -" button at the same time for 3 seconds to enter the setting interface. After releasing the "+ & -" button, press and hold the "+" button for 15 seconds to release the 6km accelerator limit and the 25km/h speed limit."
Simple and immediately effective.
I just received one and it only works with this new system, do you know how to limit it to 25 km again?
@@salvamartin5478 I've not tried but I intend to 1st thing tomorrow. I'm going to try the same process in the hope that it will reverse the changes.
@@JM-jm4ei
Thanks!, I appreciate the information if you figure out how to reverse it.
@@salvamartin5478 Confirmed. Same procedure for reversing changes.
@@JM-jm4ei
Achieved, thank you very much
I watched another guy's video about how to increase the speed and remove the limiter but he said that after you picked the speed numbers that you wanted, you should turn off the bike and then directly on again for it to save the new settings.
But it never worked, the speed was still limited to 25 kph. Now I know why it didn't work, you needed to press and hold the i button first, and then turn off the bike. Thank you so much, now I love my bike even more!
Just tried it and it worked. Thank you. Its really fast now 😓
You're welcome!
Setting the wheel diameter to 22 gets closer to the actual speed if not spot on. The miles are off so with ebike displays you either choose accurate mileage or speed which is controlled by the wheel diameter setting.
if you set 30 diameter speed goes to 60 kmh...certified
clown
Very helpful didn't even realize this was a option
I'm glad you liked it.
brother, you are my hero lol
i used throttle on its own and it went to 36km for me...
but when i was riding it was only 25km because of weight etc....
then i saw your video.... went to settings and speed limit showed 25km... put it to 60km...
went to ride again. it went up to 40km. that's good enough. i just gotta lose some weight and it'll go to 45km and maybe more ... insha'Allah may Allah keep me safe
I'm glad you have found my video useful, thanks for watching and describing your feedback. You can consider subscribing! Thanks.
Thank you!! Now I don’t have strollers passing me in the slow lane!
Hello. Thanks for all your great reviews & tips. Do you know if it’s possible to limit « throttle speed » at 5 Kmh?
im planning to buy this one just because you can unlock the speed so easily, im not spending 1000+ euro on something i can do on normal bike for few hundreds.
Thank you did this and its now faster im in new york usa
I'm glad it worked.
Fantastic, I've been waiting to see how this is done. I love your reviews and so do m y friends.
Thank you so much. Brilliant,
👍
Many thanks!
Your videos are super helpful
Thank you!
Hi, thanks for your great little Video! When you changed the Speed to unlimited, is there a fast way to get back to Limited Speed (25km/h)? Thanx
No, you need to repeat the process, so there is no quick way to limit.
@@TechTronic9000 Do you maybe know if there is a way to make like a system that for example: you click - 5 times and the bike goes to 25km/h? Also can you disable the throttle bar?
@@TechTronic9000so when the bike is fully unlocked if you go in settings and select reset that won't lock the speed back to 15mph
hi, how long can i ride the engwe when its tuned to 55 kmh
Hi! Is there any way to unlock the power without changing de speed limit? By doing the process that you hace explained here, have you noticed more power going up hills or only noticed a change in speed? Thank you in advance.
im sure it goes both way you cannot increase the speed without increasing the power
@@matox01tekknot true, the speed is limited by the controller
To increase power you need to increase amps
Hey! Tnx for your clear video. Does that work on every Engwe engine bikes?
This works for the X, haven't tested if it works on others. But it also depends on the LCD & controller model. Usually the PRO model has another controller / LCD so it will probably not work.
Will the same combination be suitable for the Engwe Engine Pro model?
Yeah
It's the same with the engwue c20 pro?
Sorry but I don't know the procedure for the C20 PRO. I have only had the C20 non pro and that one didn't unlock at all.
Is there any way to make the bike more reactivw? I have to wait some time before it starts going
You might be able to adjust a bit the assistance delay.
@TechTronic9000 how
Hi, i am looking at getting the Engine X to food deliveries on Uber/Deliveroo. If I unlock the motor so it can provide a throttle speed of say 17-20mph going up mixed terrain (flat and hills) how much distance/range would you say i could expect? Thank you
If you are going also to pedal from startup and when accelerating, then you will probably do 50-60km considering hills, extra load, etc.
thank you!@@TechTronic9000
Hi Techtronic,
Very good video by the way. I have a few questions, when you increase your speed limit to say, 30 mph will it kill the batteries quicker? I've noticed that my battery doest last very long when the speed is increased and using the throttle 70 % of the time.
Is is it when you use the throttle by itself it kills the battery? Or is it better to use the pedal assist?
Yes with electric motors the faster they go the higher the power consumption grows, so the range gets a big decrease.
hi techtronic,
i saw in the video when you set the speed limit to 60kmh and you tested it out why did it only go 52kmh?
thanks!
The display & controller only allows maximum unlock speed of 60km/h, but it has nothing to do with real speed under load. On some models you can set the limit to 99km/h and they will only do 28km/h top speed :)
How can you fix the 25 error and the same fetbike as yours please make a video thank you!!!😢
The ENGWE EP-2 PRO has a Yolin controller, the code 25 is related to the brake sensors. Check the brake levers, brake electric cables, brake sensor plugs.
Is this the 500w one
And i have engwe p26 250w
Does it also work on that one
This is the EU 250W model that unlocks and has peak power close to 1000W. It's one of the earliest X models.
Great video, I was about to body slam my new bike because it was max 25km/h
I'm glad that this was useful to you!
😂😂
can you reset the settings with this?
does this work for the engwe c20 pro? great video
No it doesn't work for the C20PRO, that model has a totally different display & controller so if it support unlocking it is done differently.
It works on my C20PRO 500W
Hello, which settings should i do for more range?
For more range use only assisted modes, keep bike limited to 25km/h. Use modes 1,2,3 and avid using 4/5.
@@TechTronic9000 i use now 0-5 mode 26km/h
@@TechTronic9000 do you know about pas mode? They say if you do pas mode you can ride 100km per battery
@@ClipMania22You won't get 100km. It's just BS.
Just press + and - for 5 seconds then hold + for 16 seconds its unlocks speed without all that hassle
Not on the X, and not on the older version. There are several unlock methods that depend on bike model, bike generation and display type.
Bro what is the bedst wolt voltage settings. I think I fucked with it. Thanks
What’s your Max speed on flat with unlocked bike?
With my weight (85kg) it takes me 40+km/h when the battery is full.
Does this also work for the engwe ep-2 pro?
You can try.
Does it work with EP2 Pro updated version?
Probably not as they have different controllers so not all functions might work. For the EP2 PRO the speed unlock should work.
@@TechTronic9000 hey pal, so what is speed unlock? is this something different to what you just showed in this video?
how can i make the EP2 PRO go faster? it only goes 25kmh at the moment
How do you unlock the part of the secret menu that is called sy5 ssp?Why can't I put the value to 1
I still have the value at 4 and it does not make me increase or decrease. Do you know how? I have the engwe ep-2 pro
I have an engwe engine X i tried to unlock the speed and when i get into that menu the 25km speed wont move when i press the + button to increase it , not doing anything can you help me whats wrong do you know ?
ENGWE has updated their controllers & display so unlock methods have changed. You can try to watch some of my unlocking videos for the newer ENGWE models and maybe something will also work out on the X.
salut am acest model engwe engine x 250w fac toti pasi dar cand ajung sa schim de la 25 km nu se schimba nici mai mult si nici mai putin cum o pot deslimita ?
I’m guessing it drains the battery 🪫 really quick how many miles if you put to 60kpm?
Depends on a lot of factors, flat out it draws almost 1000W. Still you can get 30-40km easy from it, using some assistance and lower speed will increase range a lot more.
Hello I have done all this but still my speed is not unlocking.
If I unlock it, do I damage the bike and the engine? When it's meant to be 25?
No, but your battery will discharge much more faster.
@@TechTronic9000 And can you tell me how long it takes? I don't know about 45 km, but I think 25 km is too little, why do they give 25 everywhere, it's as if I was running at that speed
How I can activate the automatic assist ? I only drive with the throttle Pedel on the right side. Pls help me
Select gear 1,2,3,4 etc. when you will pedal it will assist you.
De Portugal obrigado pelo vídeo ajudou muito
Consegue atingir quanto de velocidade nela ?
does this unlocking works for C20 pro model as well?
No it doesn't.
Very helpful thanks 🎉
Hello, I want to ask if the Engine X bicycle is limited to 250 W only electronically and it can be limited both in power and in speed up to 750 W and more than 50 km/h, by pressing the commands that you show in the video. is that so???
The X when is unlocked it has up to ~1000W peak power, speed is unlimited and can be up to ~45-50km/h depending on weight, temperature, tire pressure, etc.
Thank you very much. I wanted to confirm it because in Europe it is a problem that the bicycle is not limited. Although it is recommended that it can be delimited on off-road terrain when one weighs about 100 kg.
@@TechTronic9000 please, how can I unlock the power to 750w without changing the speed limit? I think that is what I should do in order to go up in a hill easily, right?
Hi TechTronic9000, It's possible to lock and unlock the "Engwe Engine Pro" throttle? Thanks.
I don't think it's possible but you can try like on the X model and see what happens.
I’m trying to find this out as well
Can you answer a question for those like me who are a bit dumb? The Engine X is 250w rated as standard yes? So by performing this unlock, does this increase the watt power rating?
The Engine X comes with a motor that can safely operate into 200-1000W range. The controller also can operate in two modes, limited 250W and fully unlocked which allows close to 1000W. So when you buy it for EU it comes locked and limited to 250W. By your own risk you can enable full power.
I dont get it why is it so easy changed up with a few settings if 250w is standard Eu. If a bike was stopped in this mode surely the bike that details 250w etc saves any hassle?
Does this work for all engwe bikes?
I don't have all of them to test, but it works for use on the X, P26, L20 and C20 PRO (reported by a user).
@@TechTronic9000What about ep-2
what model is your engwe?
This is the Engine X model.
Can you please make a new one the software changed and I get error 25 instead of error 22 when activating throttle. And when I try to remove the speed limit the 25 won’t go up 😢
I haven't tested the new model yet so can't advise on how to do it.
do you know how to restore default settings?
There is an option in the menu for reverting to defaults.
@@TechTronic9000 can you please elaborate 😁
Does it work on the engwe engine x 250 watt
Follow this method for maximum speed. This video doesn't show you actually how to unlock it. Hold + - until TC screen appears. Then hold + for 15 seconds until screen changes. Then hold i to lock it in. This method took my bike up to 84km. Let me know how you get on.
Thank you for your help
could you help me to unlock P1 menu for engwe C 20 Pro
I don't have experience with the C20 PRO while the C20 non pro doesn't unlock at all.
Thank you for this video 🙏
Glad it was helpful!
Does it work on the ENGWE EP 2 pro?
I have the same question
Yes
Mines at 32 won't go up or down?
Hi. Thank you for clear explanation. How do you enable gear “0”? Thanks!
Just click on the min button till youre on 0
Can you make it say miles per hour
Yes , you can.
Is this for the UK version?
Yes, works also for the UK versions.
I have a problem my engwes gashanlde Can only drive 5km and sometimes it doesnt even drive i Can only use pedals
Does it have any kind of error? Check all plugs, cables be sure that the battery is full. Also be sure that the bike settings are OK.
Does it works to the europe version
Yes, it especially works for the EU version 😉
Thanks a lot ❤🙏🏻
You're welcome 😊
Does this only unlock speed or also power? I think power is always same 750W, no matter if speed is locked to 25 km/h.
It's a bit more complicated, the bike controller has a motor strength assistance table map. The power will be reduced when reaching the 25km/h thus you will not get full potential of it. Unlocking the speed will also set the motor strength to almost 100% (~around 1000W) and because you will not reach a limit it will use all that power. As when limited to 25km/h you do get more peak power when you are climbing a steep hill and you are slower than the limit.
Thanks. So if you drive locked and unlocked 25 km/h it will use same power? Or also power unlocked in lower speed then 25 km/h is bigger?
In additional PAS settings is possible to adjust assist levels in percentage (up to 100% on highest level, 5-factory set to 96%) also max current in amps (according controller type - data on controller label)
correction. You can not change speed unless you change LD (wheel diameter) first. It must be increase for speed to reflect change.
What dose it need to be set at?
I recently got 1. It does not work anymore.😢
Thanks nice video
Thank you too!
thank you.
You're welcome
Very good video
Thanks for the visit
Thanks bro!
Thanks for watching.
thank you!
You're welcome!
Thank you!
You're welcome!
My C20 Pro goes up to 99 km/h when I unlock it, but after that the speed is still limited to 25... Do you have any idea why?
Put it to anything under 60kmh
Does not work on 2024 model
I also got the 2024 version:
Tuning:
1st: Turn the display on -> hold plus and minus (+ & -) just like he does first in the video.
2nd: Hold the plus (+) until it pops up with the unlocked speed and hold the (i) button so the display restart and enable the unlocked speed.
Untuning:
Do the same thing as you tune the bike, but this time it will reset the speed to EU regulations again.
Where does the key go
Under the main frame near the folding area.
🗿
Can it use without lisance ?
😂yes
It dont work om my engwe x 250 w
You might have a new version of the bike which might have a new unlocking procedure.
Did you finally succeed ? I plan to buy this bike. Thanks.
I have a samebike which beat's this bike 😂
Battery bigger? More power? Better suspension?
Doesn't look like it to me.
No 24 ok
No 24 Inc ok no 22 /24 Inc really 20+4 diamanter 24 ok no no 22/ok 24 my gps ok 65 kmh my ado a500watt battery 48/20amper Speed max gps 65.5kmh ok 24 Inc
My ado a20+ 500wart 24inc Speed max 65.5 50/55 kmh
The a20+ has 20" wheels, on 36V you will do realistically 35km/h. The 50-60km/h speed is achievable only by higher voltage.
Thanks!
Thank you very much!