How to Hand Cut Window Tint on the Car
Вставка
- Опубліковано 22 сер 2024
- List of my recommended tint tools! - bit.ly/2WvWa4K
Tool Apron tintdepot.com/...
Shank tintdepot.com/...
Felt Card tintdepot.com/...
Heat Gun tintdepot.com/...
Spray Tank tintdepot.com/...
Spray Bottle tintdepot.com/...
Scrub Paddle tintdepot.com/...
Scrub Pad tintdepot.com/...
Red Dot Knife tintdepot.com/...
NT Blades tintdepot.com/...
Conqueror tintdepot.com/...
Bulldozer tintdepot.com/...
Flat out Yellow tintdepot.com/...
Hybrid tintdepot.com/...
Fusion Handle tintdepot.com/...
Side swipe tintdepot.com/...
Blue Max tintdepot.com/...
Green tail fin tintdepot.com/...
Tri edge x yellow tintdepot.com/...
Tri edge orange tintdepot.com/...
Tri edge pink tintdepot.com/...
Ez reach tintdepot.com/...
Mac tac tintdepot.com/...
Gray lidco tintdepot.com/...
Gator blade tintdepot.com/...
Camera Gear
Canon Camera: amzn.to/2Ar2ZI7
Sigma Lens: amzn.to/2AqFFu0
Sennheiser Mic: amzn.to/2CD8Te7
Camera Jib: amzn.to/2CCi0fc
Camera Bag: amzn.to/2CrvmYe
Music:
Ronald Jenkees - ronaldjenkees.com
Epidemic Sound - epidemicsound.com
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
🔥 Recommended Film and Tool List 🔥 bit.ly/2WvWa4K
I have tinted my own personal vehicles for years. When I started back in 2002, I removed the whole window! Hahaha but your video came across when I was refreshing myself on tinting because I just got a 2021 sierra denali and the tints are the first thing I have to do! You make such great videos and instructions are simple and presented perfectly! You have me as a subscriber now and I appreciate the time and effort you put into it man! You're a great tinter and a great UA-camr, keep it up! 🤙🤙🤙
I’m new to tinting and just got a job tinting for a dealership , your vids help a lot man. Thanks!
+Kenny Walsh Great to hear!
they don't have a plotter and cutter program?
Are you still tinting for dealerships?
I am from Iran . Your work is very beautiful. I'm doing this for 9 years. I love your work very much. good luck my friend. jamshid from iran.
perfectly explained on moving the tint over 1/2" and then back 1/4" to leave edges covered. well done.
I'm so glad I found this video. It's best tutorial I've watched so far, I feel like I learned more in the first 2 minutes then the hours of other ones I've watched
Fr tho
No time wasting
glad to see that you are back!
I do Window Tints in Fort Lauderdale. For V-Kool, Mainly Yachts and condos, started off doing cars 7 years ago. Keep up the great work and keep spreading knowledge, all your videos are helpful man! I support it.
TintStuff, I have been watching all your videos since 2011. I learned everything I know about window tint from your channel. Thanks for posting such informative videos on such subject! I have been tinting windows for 6 years now going on 7! So rewarding seeing happy customers!
Please, what tint paper to work with and what is the name of the company so that they send it to me, thanks
Thank you for all that you have taught me, i love the lessons and i love the tools you suggest. Keep it up👍🏼👍🏼
Glad your back.
Almost worth driving to Michigan to have you tint my truck.
By the time u made it back to Michigan ur tint would be pealing lmfao
have not seen u for ages..i used to learn heaps from you..thought you dont do tinting anymore :) welcome back !!
videos are getting better and better!! cant wait for the next vid!
Glad your back making Vids Matt
the ad on this video dissed tf out of you 😂 “it was like youtube tinters just want to make money from yt and give you irrelevant info” 😭
😂😂 what channel did the ad come from?
@@DetroitTintStudio for the life of me i can’t remember it was some almost bald dude talking about a course they were selling and he was like “these “tinters” just want to get a few bucks out of you” as he was scrolling through tinters videos and like 3 of yours were on there 😂
Dude.. its been like 3 years since you last posted... Glad you're back!!!! I use your techniques when wrapping my RC model boats :)
Thank you I'm just getting with new biz! Really appreciate your content!
I use a marker for the sides. Then just cut 1/8 of an inch outside each line. That way you don't have to keep moving the template over and over again.
Man i gotta job in tinting, your videos are helpful however in middle east things are different, we apply from down to up instead!
Great video glad too see ya back!!!
Did my first car yesterday, this would have saved me so much time had I found it. On the bright side, I can use it to fix the one window I messed up, and a window on the other car which is messed up. Not looking forward to removing the old tint.
What would you like to see in the next video?
An explanation on your disappearance! love the vids
TintStuff, love the new shop and setup. If your taking requests, how about a non-arched eyebrow (sun strip).
Thanks! i'll see what i can do about that one. I actually haven't done one without a plotter and even that isn't consistent
I know you’re covered it before, but how about shifting windows in some of the more complex vehicles? Or windows that are half covered by frame in the outside, and have a completely different shape on the inside?
Do a video on thick defrost back glass that cause “peanuts”
I came for the Ronald Jenkeez! I am dancing my ASS off whilst watching this video. I don't have a car so I have no need to tint. I don't even know what tint is used for. I just want to DANCE TO RONALD JENKEEZ!
Thanks again I had a pretty stressful situation because I wasn’t cutting right!!!
Thank you for the video and tips, I am beginner level still learning
Waw i watched your vedio published in 2011 now watching you in 2018 ..
I love your channel, I’m just starting out and these videos help a lot!
You make it look so easy!! I just did my own tint on my Durango.
Because he did it to the outside of the car bruh, it should be applied to the inside
@@ThermiteEngineer He didn't apply it anywhere yet.. He just cut it to the shape of the window before installing it to the inside. Also needs to be shrunk before installation.
Appreciate your help in the demo for the side windows
I've found this very helpful and I'm able to cut door glass so much better now. However I'm having trouble with my tint peeling at the top of the glass over time. I wonder am I putting my tint seem to close to the edge of the glass?
Thats exactly what is happening, As soon as u lay it you can run your finger over the top to see if it snags.. If it does then you know the seal will pull it up too. When you lay your top edge let it be around an 1/8th of an inch from the top edge.
Thanks! Love your vids!
Your videos are awesome bro. Good work. I’m a fan of your talent!
Im glad to see you back! Im sure like others, I to myself thought you died or something. Iol. I just so happened to look up tint removal vids for the rear. And mentioned you to my gf and decided to check out your page...and BAM...youre back! lol I look forward to more awesome vids man! Keep em cominnnn!
Dang dude. Nice cinematography! Are we looking at a lot of 60fps shot footage used in the intro? Looks good.
Welcome back
wish i watched this before trying my own tint! I did the top cut first and i think that screwed me. Still ended up with an ok job for a first time. Not cutting that bottom and using it as the guid looks like a much better way to go
Love the explorer. Got a ‘14 myself with 15 all around
Try a black sharpie on both sides alot easier!!! And cut on a glass cutting board on your wall...!
Are pre cut tints a better idea for someone tinting for their first time?
Very useful.
Tricks of the trade.
Thank You
You made it look to easy.. 😀 nice tutorial vid.
So in America use tint the out side? In New Zealand we tint the inside of it not out
Is the liner side always on the outside of the roll? and the tint one on the inside of the roll? Nice video!
Usually yes but some companies roll their film the other way.
I will often peel the corner of the film to double check which is the liner side before cutting my film if I'm unsure
Finally back
I'm wondering the reason my trimming gets all messed up with cut corners or tears have to do with tint thickness. This tiny is cutting like butter.
I have a new blade, so I know it's not the razor.
Glad your back..do you have your own shop?
Great video
How do you prevent the blade from grabbing the rubber gasket on the exterior? I have a bad problem with my blade cutting into the seal and it gives me really wavy/inconsistent edges when hand cutting which forces me to rely on a plotter.
How about the Tint Stuff Official Drinking game? Every time Matt says "Put out a little blade," you drink. lol. Nice job on the Videos, Matt.
+JayinMI thanks! add "alright" and "ok so" to that list! 😂 I've been editing out so many.
WE NEED ONE VIDEO WITH VW GOLF5
Do you really have to shrink the tint of you cut it correctly?
I’ve got a truck that i just bought with a home done tint job. It’s not bad on the side windows, but the windshield tint goes down way too far. If I just wanted to cut that higher, would it be roughly the same procedure?
Hey Matt I was wondering what kind of razor blades you use it seems the ones that I get don’t cut as effortlessly as yours. Also what squeegee ? Iove the vids man glad you back btw. Fellow Michigander here lol
Olfa or NT stainless steel blades. Blades for glass must always be stainless steel or the scratch. amzn.to/2D63SM9
How bout that 50 degrees to snow storm weather huh? lol
Perfect! This video answered my questions about cutting tint film.
Nice work awesome.
Why after I cut small side I move tint over them cut
What to do if the people that tinted your car got all kinds of particles under it like short hair or small pieces of dust
nothing you can do, it will be stuck
Wait this might be a dumb question sorry I’m verily learning ,so you don’t have to shrink unless the window curves ? And about windshield I watch your videos and you don’t have to add water and soap to it right just probably a soap bar and let it dry correct ? And if there’s bubbles try to even them out than heat them if they keep coming out or no ? Thanks
instructions in clear, mirror broke off
What size film should I buy to tint the 4 side windows of a Toyota Corolla and the back window as well
niceeee. just how i would do it!
How much should I get to tint a sedan for e.g. a toyota corolla?
Cool video man
What slip solution do you use? Or how much baby shampoo do you use with however much water?
What is the name of the white tape that u sometimes use ? Or what kind is it
Very helpful information. What is the Name an Model of your plotter?
Quick question ! Where do u get your tint .. or what kind of tint to get for a begginger I’m 15 & I wanna tint .. just wondering what type of film to get and what sizes & how dark 💞
wow ronald jenkeessss
What tint do I get, my back window is 26inches from top to bottom. I want to tint my own windows but I do not know where to get that size tint rolls
what blade angle , force and speed settings are you using please also what thickness or ply film you using thanks
Have you ever thought of wrapping the end of your knife in electric tape so when you ride the top edge you don’t leave a cut in the top of the film all the way across
It doesn't leave a cut in the film. i'm not putting much pressure against it. Also the liner is protecting the film in this instance.
TintStuff nice! Please post more videos! Would like to see more videos posted daily! Love your work!
Thank you! I'm working on it :)
Haha. when i was wondering the same thing i would leave a mark on the top edge. I was going to ask about that but you beat me to it.. i had to changed my technique so i wouldn't leave a mark.
What I wonder since I have followed a how to diy training... that some tinters say you have to completely remove the window to get ''the best cut'' and the other tinters say thats bullsh!t. So... both say the endresult is the same for their technique. Is it just a objective meaning or is there a real theory behind both. Just dont see myself demount windows the whole day... would like your style more.
Ggood work 🔥
Please, what tint paper to work with and what is the name of the company so that they send it to me, ? thanks Sr.
Were you getting chunks of baby shampoo in your tint jobs is that why you got new filter???and hose???
Why you apply it to the outside of the car
Now everyone finna put it on the outside. Mr big brain over here
Great video! What sprayer are you using? It seems really nice. Hard to find a quality+ reliable product in Canada!
Great job
What’s the site to get your pre cut pre shrink tint?
If using a cutter what software do you recommend? Thanks 🙏
Thank you 🤙🏽
Please anyone where can i get practice film?
Where do you get the tint film?
Liner side which way😭
Why does no one respect the car an cut corners on the flipping car. First rule of tinting. Respect the car!!
I just wana show i love you till in alive 4u and my doughters life n my jaaN u are
How do I join the team
Awesome
Awesome!!
First comment in my life ever! Party at my place!
I'm glad i could be a part of this moment
TintStuff You're the best bro. Thank you.
Nice 👌
How do you prep the glass razor blades or white scrubby pads???
Usually a plastic "Gator Blade" but ill use a razor blade if there is adhesives from stickers or other stuff
TintStuff thanks any paper towels for dirty Windows and seals?? Blue shop towels??
+JBIRD575 I like fluffy microfiber towels. I think we have a bunch from Costco
TintStuff ok thanks do you wash microfibers before you use them or use right out the bag also no dryer sheets rite air dry only???
Thanks
Nice !
Can you recommend a tint? 2 ply?
Black
Классно получается, молодец!!!!
Todavía venden fil precortado
What do you use to spray the window?
+sahagivet water and a little j&j baby shampoo in this video
Sorry I meant like what kind ok sprayer are you using.. lol
3 gallon spray tank with a flexible hose and a brass spray nozzle. they sell them on most window tint tool websites.
Should u shrink all car tint
jbecker18jb. Most back windows need to be shrunk. With a few exceptions like the jeep wranglers. And flat door windows. You can get away without shrinking.
Good