Husqvarna 305 vs 405x Automowers

Comparison between the 305 and the 405x explains why you may choose one over the other, both are great units and will yield good results but be sure you know which one suits your needs best,,, any Questions ask bellow :) Cheer Hamish " Auto Mow Tech"

[@V8LC100]

Great video thanks. I have a small front lawn not connected to the rear yard. I could run a boundary cable to connect the 2 however. Can I lift the mower up and move it into the front yard with both of these models? Thanks. Also from a reliability perspective, which one is the pick of the 2 please? Thanks mate!

[@AutoMowTech]

@V8LC100 Hi yes each of thes units you can do what's called a "secondary Area" where you choose the two boundarys run then to the next area and opean them around that lawn - the difference is when you place it in that away area you set the mower to secondary area when battery is low it will stop and not look for the charge plate..my preference is to make acsess to that area if possible to it doesn't need placement to and from charger but works well for small area if it can mow in one charge..The 405x for me is more popular with AIM,connectivity and electronic cutting hight...I sell more if the 405x,,every 3 or them I'll sell a 305 ruffly

[@EvilMorty22]

Could you use the electronic height adjustment to make a pattern on your lawn? So for example have it have higher cutting setting so that it leaves a large "H" pattern on your lawn? Or is the gps not accurate enough for that to work?

[@AutoMowTech]

@knuthoem. If you have an EPOS System "exact positioning operating system " without boundary wires you can map out an "H" and active this..305 and 405x or other wired modles you would have to use an area switch and creat a secondary area with wire and place mower into that wired "H" - important factor is than any wired system that does use gps assisted navigation only has an accuracy of 2-3m so not possible to have solid position to do such complex tasks..with EPOS systems you can make a map over a map to create an area to cut differnt hight,patten and scedaule.