I am having problems with the DPF on my van I have 5 mb at tick over and 50 mb at 2500 revs but still getting re gen and going into limp mode could it be the Knox sensor. Which is reading 984 .
Do you happen to know if I would need to tell a Renault master 2018 it has a new nox sensor or if it will auto calibrate it’s self. Have added a new sensor 1 and am now getting higher reedings on sensor 2 than sensor one, not sure if faulty sensor or van not reading it correctly? Thanks
Hello, in my van it gives me error P2A00 and changing the P2202 Nox probe and doing the reset from the program does not complete it completely, it fails at the end of communication with the probe because the desired conditions are not reached
Just had one from another garage, Nox sensor fault still there after replacing the pair of them, wiring rubbed and rotten 2 inches from the plug on the rear sensor 🤦🏼♂️😂 all they had to do was open their eyes
I've got a freelander here came from another garage. They put a new intercooler but still chucking air Correlation codes. Those that connects to the intercooler is split only a foot back from the new part they fitted
I had this last year. £350 for NOX sensor then adblue reset. Then all good.
U1218 is a communication error between the BSI and the nox ECU, I had similar on my 308 T9, but it was a U1318.
Would I be able to do this process with the launch evo you recommend as I’ve changed my box sensor but didn’t realise I had to initiate it
I am having problems with the DPF on my van I have 5 mb at tick over and 50 mb at 2500 revs but still getting re gen and going into limp mode could it be the Knox sensor. Which is reading 984 .
Do you happen to know if I would need to tell a Renault master 2018 it has a new nox sensor or if it will auto calibrate it’s self. Have added a new sensor 1 and am now getting higher reedings on sensor 2 than sensor one, not sure if faulty sensor or van not reading it correctly? Thanks
Just had a nox sensor fitted. Now ad blue fault. Had dpf cleaned. Do I need to get it re set? Also do you visit the south coast? Brighton area. Thanks
Jimmy duno if you noticed but the ambient temperature level wasnt working on the dash
Im sure youll be seeing this van again soon with a dpf problem
Yes it's been done
@@ORileysAutos 👍 I drive a citroen relay I couldn't help but notice
Hello, in my van it gives me error P2A00 and changing the P2202 Nox probe and doing the reset from the program does not complete it completely, it fails at the end of communication with the probe because the desired conditions are not reached
External temp sensor was off too....
Good spotting. Did I not mention it in the video? Must have forgot but its coming back for a mirror soon
What type is your motortester?
this one to need an ambient temp sensor
Yes it's been done
Just had one from another garage, Nox sensor fault still there after replacing the pair of them, wiring rubbed and rotten 2 inches from the plug on the rear sensor 🤦🏼♂️😂 all they had to do was open their eyes
I've got a freelander here came from another garage. They put a new intercooler but still chucking air Correlation codes. Those that connects to the intercooler is split only a foot back from the new part they fitted
@@ORileysAutos beware of garages that have fitters walking round with white sticks