I used the Triumph axle (similar to Ducati) and have a 17x6 magnesium 5 spoke on mine. Just needs a 3-3.25mm spacer and new wheel alignment pins to be 3mm longer at the back of the pins. At least that's what it needed to make it centered. the 3-3.25mm spacer offsets the wheel same as the Honda wheel you have sits on the swingarm now. I used a 2nd gen Honda SSSA from a VFR 750. Not sure which one you're using. I did my mod @ 2007.
@frankmaggio4328 I'm on my 2nd 900rr with a sssa. 1st one was about 10 yrs ago. Both had the 97 sssa with a custom dog bone and linkage. Ill see if I can find some pics and put in the next vid
If you decide to change up the rear wheel. You can take a Triumph 955i hub assembly and put it in the honda. Triumph copied Honda's design. The bearing are different but that's about it. I did a Muzzy Raptor Replica on my 97 ZX7R. Only modification to the Triumph assembly is that you use the Honda brake holder, just shave off about 1mm so it fits in the Triumph assembly. If interested I contact me. I no longer ride but I still have the bike in the garage.
It's coming along, nice work man👍
@@DreamBuildOverland thanks buddy!
Route the exhaust to the left side. I have a D&D twin can from a R1 on the left side. Gotta show off that SSSA and Marchescini wheel!
@frankmaggio4328 too late Frank 😆. I've got little material and even less welding skills. It did turn out pretty nice on the right
I used the Triumph axle (similar to Ducati) and have a 17x6 magnesium 5 spoke on mine. Just needs a 3-3.25mm spacer and new wheel alignment pins to be 3mm longer at the back of the pins. At least that's what it needed to make it centered. the 3-3.25mm spacer offsets the wheel same as the Honda wheel you have sits on the swingarm now. I used a 2nd gen Honda SSSA from a VFR 750. Not sure which one you're using. I did my mod @ 2007.
@frankmaggio4328 I'm on my 2nd 900rr with a sssa. 1st one was about 10 yrs ago. Both had the 97 sssa with a custom dog bone and linkage. Ill see if I can find some pics and put in the next vid
If you decide to change up the rear wheel. You can take a Triumph 955i hub assembly and put it in the honda. Triumph copied Honda's design. The bearing are different but that's about it. I did a Muzzy Raptor Replica on my 97 ZX7R. Only modification to the Triumph assembly is that you use the Honda brake holder, just shave off about 1mm so it fits in the Triumph assembly. If interested I contact me. I no longer ride but I still have the bike in the garage.
@frankmaggio4328 that's neat. Not known anyone that did that on a kwak. You should do a vid and post it up!