@@dawidl5007 David, I'm really sorry, but after reading your reply and thinking about what you said, I can only come to the conclusion that what you might have meant by that is "Yes".
For the next repair, use fiberglass mat for your first layer. Then alternate fabric/mat. Last layer should be mat because it's sandable. Fabric isn't sandable (you're cutting the threads and end up with a series of fiberglass "U" which have no strenght). You can add bondo or gelcoat before sanding to fill up the pinholes and low points. If you want to use fabric only, you need to use epoxy. And a filler of sort at the end to have something to sand. Fabric alone will delaminate with polyester resin. Also, use PVA (polyvinyl alcohol) at the end to seal your resin or gelcoat from air so they cure fully. PVA forms a temporary plastic film you can wash off with water the next day. Otherwise the ouside layer of the resin will stay tacky and clogg your sandpaper. Cheers !
@@AndrewCamarata I would suggest you keep epoxy resin around the shop all the time instead of polyester. Epoxy resin is more expensive but it sticks to almost anything. Polyester is fairly limited. I have used a brand named “East System” for a lot of years and never had a comeback.
some of his videos are entertaining to watch but seriously if you're not being hyperbolic then you should really try to figure out where and how your life went wrong ! there should be way more days than there isn't that are better spent NOT watching other people enjoy themselves and rather YOU should be out having your own fun ! 🤦🏻♂️
I've watched several of Andrew's videos now and I have to give him credit for the equanimity he has with constant mechanical breakdowns. That's a level of patience I can't fathom, but I can appreciate it.
Hello Andrew, I just wanted to say thank you for taking the time to make these videos, i have a small landscaping and drainage company in Bella Vista, Arkansas, I’m the only employee, our two year old son absolutely loves watching you and Cody and Blue !!! You have a great helper with you also. Wishing you and yours the very best for 2023 !!!!! Keep up the good work and keep the videos coming !!!! Thank you
Thanks for taking us along with you! Lovely place - I could really get into old historical places like that Inn. Looked like a relaxing & quiet place to slow down and recharge for the weekend. Glad you two had a great time.
Andrew, I've come to enjoy spending time with you while you work on stuff. I've experienced a lot of the same type of field engineering, and really like your determination and ingenuity. One small piece of advice, if I may, please consider wearing a respirator when you sand. I've worked in customized manufacturing for over 30 years and from 1st hand and observed experience, your 60 year old self will thank you. Very respectfully, Tim
The Summer of 2022, the Summer of Love for Andrew and Samantha. Too bad it's over I enjoyed seeing you two together. Very cool places to visit on that river.
If you can go from site work to running heavy equipment to working on wave runners holy cow the amount of knowledge and how he just gets right to it is astounding. Love the work AC
If you have a mechanical aptitude, it applies towards anything mechanical. Andrew obviously has tons of it. So much in fact that he is able to move from thing to thing without even thinking about it much. He also has tons of experience and the ability to work it out which is in my opinion the very definition of intelligence.
When mixing filler and hardener, put the filler on a flat surface and make a loose flat circular shape like an uncooked cookie. then the hardener goes across the diameter of the circle once in a straight line, that method usually gives you a good ratio Great vids, cheers
Well Andrew, watching from Ireland 🇮🇪 UA-camr myself, got my inspiration from watching you and still do. Your a legend worldwide. Have a safe and happy 2023 mate. PS looking forward to seeing the crusher running when the snow melts 👍
That looked like an Awesome place to visit Thank you for letting us go with you and Samantha on you 2 day trip alway's enjoy being around and what you have to show us thank you .
FYI, that's not a design defect with the GP1800. It's intentional. That's a racing ski, so the hull is really thin to cut weight. If you want a thick hull that you can beat on, Kawasaki makes the strongest one and they use gelcoat instead of paint. It would be a lot better for the way you ride.
@@timr86868 Not anymore. They started phasing out NanoXcel in 2021 for exactly this reason. With the exception of the racing skis, they're going back to traditional fiberglass because it's a lot more durable. The 2022 FX is SMC fiberglass now. The EX is SMC fiberglass with the exception of the EX-R and the JetBlaster.
Lake Champlain is my neck of the woods awesome to see you up this way, Valcour Island is awesome there are still cannon balls littered around it from the naval battle there during the revolutionary war
A great trip on the Hudson, was especially impressed with the Shelbourne Farms Inn, would love to stay there one day. Thanks for the great video of you both having a nice time.
36:50 This reminded me of Bob Ross when he had a baby squirrel in his shirt pocket he named Peapod. I’ve never seen a squirrel just swimming around and being so friendly; that little guy was adorable!
Andrew, I'm relatively new to your channel and watching as many as I can to catch up to your latest. I just wanted to say, I admire you for what you have done going from working for the postal service, to doing what you do today. You went out there and grabbed what you wanted to do with both hands, and you've embraced that ever since. You work dammned hard and also play hard and I assume along the way you made a financial success of it all. Well done Andrew.
Andy, out of all the years I have been watching your channel this is the first time I have ever seen you take a vacation, IT'S ABOUT TIME. good for you, that's what great companionship does for you. Hold on tight my friend it's going to be one hell of a ride. Oh, by the way, great video too..
Looks like you had a great time. I'm an old time body shop owner, and I cringed when the bondo came out. Bondo is made with talc, and talc is an absorbent,like speedy-dry. Next time you fix it, use a waterproof body filler. When folks would try to fix their own body rot it would usually get worse,because the bondo absorbed moisture and kept it next to the metal. Great videos, I really enjoy them
Andrew you are the best person so kind I never heard a bad word in your videos it's a dream to have a friend like you I will never going to stop you watching love your videos. I wish to work with good people.😃😃😃
thank you for another awesome video Andrew. this is the exact definition of what it's like to live the American dream. great camera work as always. Its nice to see the girl having a great time, she will remember these moments as the highlights of her life as she grows old.
I love the machines and construction projects but I will watch a Camarata travel vlog ANY TIME! I was cracking up at the "farther" vs "further" conundrum!🤣You two are adorable together!
Hi Andrew Happy New Year buddy to you and yours. Looking forward to your content for 2023. A trick a gardening buddy of mine and I have found the resin works really well on the under side of mower decks clean out thoroughly then paint on stops grass sticking and rotting the decks.
atv's, snowmobiles, and wave runners stopped being made good awhile ago. I like the older made stuff from year's ago, lasts longer without all the digital junk, and they just made better stuff year's ago. Thanks for the video. G-d bless y'all.
@@4lifejeph Dan is also a UA-camr in upstate NY. Dan and his son, Jesse, helped Andrew add on to the Castle. That was a epic 3 hour video. Dan’s wife, mrs W, is and ultra distance trail runner, singer, musician, song writer. Ok now I sound like I know too much.
That was great to watch. I remember the visit to the Statue of Liberty, which impressed me a lot. Hope the repairs are OK. You may have to do it some more. Difficult to see how you could get a permanent repair though. Thanks, I enjoyed that a lot :)
Fibreglass thing I saw a while back which is super useful. Cut up some 1" square of fibre, then pull it apart into just the threads. Mix that into a pot of resin and use that for the initial repair, like a paste. Then lay sheets over the top at the end.
I've taken to wearing PPE when sanding anything. Instead of always trying to determine if I should or shouldn't, might as well for the few minutes and never thinking about it again.
Sanding fiberglass without breathing protection WILL lead to seriously lung issues. I had a friend who didn't listen when I told him to. He's now on oxygen the rest of his life no more time out in his boat he fiberglassed several times. The same with grinding or danding pretty much anything. Out lungi have no filter capacity. Sanding and breathing rust can actually kill you.
@@devinjohnson8623 At work we grind tons of stainless steel, which gives off hexavalent chromium but noone wears masks, it's one of those things people take for granted. I'd rather look funny and not breath that all day.
This guy is the best. I look at all his cool shit and just smile and laugh. Totally deserves all of it and more. There are so many douchey YT'ers out there and our man AC ain't one of them!!
💐💐💐💐 Anyone see the flowers and think of when Andrew showed his fake flowers from Castle? “Don’t have to water these, and they look good all year long, or something like that “. 😂😂😂 Great Video! Videos are even better with Andrew talking!
When the hull is completely shot I would love to see you swap that powerplant into a jetstream mini jet boat and put that to the test. I think they are built to handle the type of riding you get into with a thick UHMW bottom protector.
I have owned boats for over 50 years from small John boats to my present 48 foot cruiser and none have ever been designed to hit rocks. Some aluminum or steel hulls are designed to withstand glancing blows but none designed to hit rockss
The exactly same thing happened to me Got towed back thought it was the end of our weekend up North but I took it apart in the parking lot and I was back in the water within the hour Weekend was saved. This is why I always carry tools in my truck.
Butterfly migration...thru the Hill Country of Texas where sometimes there are so many you can't see the leaves on the trees because of the great numbers of Monarch butterflies. An awesome sight!
I grew up in Plattsburgh so a big "thank you" for spending time on Lake Champlain and going to Valcore island. I live down south now and it always great to see the north country.
Andrew with a squirrel is the best thing i have ever seen. We dont need heavy equipment stuff anymore we just need more of that squirrel
It will only crack the nuts 🤣
No
@@dawidl5007 David, I'm really sorry, but after reading your reply and thinking about what you said, I can only come to the conclusion that what you might have meant by that is "Yes".
Pretty cool. I'm sure he has been fed before by humans. There are lots of places where I've fed squirrels and they are all in rural tourist locations.
@@davec.3198 woah woah are you trying to say Andrew isn't a squirrel wisperer?? 😂😁
For the next repair, use fiberglass mat for your first layer. Then alternate fabric/mat. Last layer should be mat because it's sandable. Fabric isn't sandable (you're cutting the threads and end up with a series of fiberglass "U" which have no strenght). You can add bondo or gelcoat before sanding to fill up the pinholes and low points.
If you want to use fabric only, you need to use epoxy. And a filler of sort at the end to have something to sand.
Fabric alone will delaminate with polyester resin.
Also, use PVA (polyvinyl alcohol) at the end to seal your resin or gelcoat from air so they cure fully. PVA forms a temporary plastic film you can wash off with water the next day. Otherwise the ouside layer of the resin will stay tacky and clogg your sandpaper.
Cheers !
Thanks
@@AndrewCamarata I would suggest you keep epoxy resin around the shop all the time instead of polyester. Epoxy resin is more expensive but it sticks to almost anything. Polyester is fairly limited. I have used a brand named “East System” for a lot of years and never had a comeback.
@@ameldaquirk3965 I can’t say I have heard of west system. It is likely the same company lol. I am in Canada so maybe they just label it differently.
Good onya for helping our mate!
A video from Andrew can make any day substantially better.
100%.
At the risk of being redundant, Always.
Can't agree more Andrew always make stick to any screen any time.
Yep
some of his videos are entertaining to watch but seriously if you're not being hyperbolic then you should really try to figure out where and how your life went wrong ! there should be way more days than there isn't that are better spent NOT watching other people enjoy themselves and rather YOU should be out having your own fun ! 🤦🏻♂️
I've watched several of Andrew's videos now and I have to give him credit for the equanimity he has with constant mechanical breakdowns. That's a level of patience I can't fathom, but I can appreciate it.
Hello Andrew, I just wanted to say thank you for taking the time to make these videos, i have a small landscaping and drainage company in Bella Vista, Arkansas, I’m the only employee, our two year old son absolutely loves watching you and Cody and Blue !!! You have a great helper with you also. Wishing you and yours the very best for 2023 !!!!! Keep up the good work and keep the videos coming !!!! Thank you
Thanks for taking us along with you! Lovely place - I could really get into old historical places like that Inn. Looked like a relaxing & quiet place to slow down and recharge for the weekend. Glad you two had a great time.
Andrew, I've come to enjoy spending time with you while you work on stuff. I've experienced a lot of the same type of field engineering, and really like your determination and ingenuity. One small piece of advice, if I may, please consider wearing a respirator when you sand. I've worked in customized manufacturing for over 30 years and from 1st hand and observed experience, your 60 year old self will thank you. Very respectfully, Tim
nice to see you out just having some fun......and this girl Samantha.... she's definitely a keeper
Another hour long video of just Andrew doing things and im going to enjoy every sec of it
+1
m
I'm amazed the Bannerman's Arsenal castle thing was built in 1908. I don't think they did a good job with the old bricks and mortar.
Me too, what a great way to spend the morning
Even the process of removing a small rock from the propeller system.
The Summer of 2022, the Summer of Love for Andrew and Samantha. Too bad it's over I enjoyed seeing you two together. Very cool places to visit on that river.
Perhaps the boat almost rolling over her was the beginning of the end or the end of the beginning
@@bill4518 the romance. Lol. It was like he was dating a female version of himself.
@@MrMcgooOG lol.....
According to Andy, she "just works" for him. Yea sure.
Probably cause her haircut
If you can go from site work to running heavy equipment to working on wave runners holy cow the amount of knowledge and how he just gets right to it is astounding. Love the work AC
If you have a mechanical aptitude, it applies towards anything mechanical. Andrew obviously has tons of it. So much in fact that he is able to move from thing to thing without even thinking about it much. He also has tons of experience and the ability to work it out which is in my opinion the very definition of intelligence.
Not really. If you are a site guy, you can do anything.
Thank you for taking us along.
Beautiful places for sure. ❤️
When mixing filler and hardener, put the filler on a flat surface and make a loose flat circular shape like an uncooked cookie. then the hardener goes across the diameter of the circle once in a straight line, that method usually gives you a good ratio
Great vids, cheers
Well Andrew, watching from Ireland 🇮🇪 UA-camr myself, got my inspiration from watching you and still do. Your a legend worldwide. Have a safe and happy 2023 mate. PS looking forward to seeing the crusher running when the snow melts 👍
That looked like an Awesome place to visit Thank you for letting us go with you and Samantha on you 2 day trip alway's enjoy being around and what you have to show us thank you .
I love how even his PFD has grease stains! This dude is the dude. You’ve brought me hours of enjoyment. Thank you!
I always look forward to season recap videos. I was hoping you made a Wave Runner video for this past year and you delivered! Thank you!
Andrew needs a pet sponsor. He's such a good dad to his dogs. It has kept me watching all these years.
WoW! Thanks for taking us along on this one Andrew! Enjoyed every minute some great content!
Happy New Year and thank-you for taking me on vacation without having to leave my couch. Hope 2023 is more awesome than ever for you and yours.
Impressed as usual Andrew and Samantha, great adventures, enjoyed it very much.
don't get too used to her
@@krashdown102 are they breaking up? Or is she having her own channel on UA-cam, Thanks
Now that was a fun video , you two are fun together Sammy can do anything !! Ha great pair you two make !! Thanks 👍
FYI, that's not a design defect with the GP1800. It's intentional. That's a racing ski, so the hull is really thin to cut weight. If you want a thick hull that you can beat on, Kawasaki makes the strongest one and they use gelcoat instead of paint. It would be a lot better for the way you ride.
The nanoxcel hills are on every Yamaha aren’t they? Even the base model EX
@@timr86868 Not anymore. They started phasing out NanoXcel in 2021 for exactly this reason. With the exception of the racing skis, they're going back to traditional fiberglass because it's a lot more durable. The 2022 FX is SMC fiberglass now. The EX is SMC fiberglass with the exception of the EX-R and the JetBlaster.
Lake Champlain is my neck of the woods awesome to see you up this way, Valcour Island is awesome there are still cannon balls littered around it from the naval battle there during the revolutionary war
Cody is so agile for a big Lab and blues closeup was just gorgeous 😅
i need to start doing more with my summers. thank you for the nice look back at summer in the middle of winter!
A great trip on the Hudson, was especially impressed with the Shelbourne Farms Inn, would love to stay there one day. Thanks for the great video of you both having a nice time.
Yet another example that there's nothing Andrew can't fix. Thanks for making my day. Mike 🇦🇺
Or break. Can’t forget about that part.
36:50 This reminded me of Bob Ross when he had a baby squirrel in his shirt pocket he named Peapod. I’ve never seen a squirrel just swimming around and being so friendly; that little guy was adorable!
Bob Ross had an entire zoo of small furry creatures in his life. He was a very interesting man.
Peepod the pocket squirrel. 👍
Andrew, I'm relatively new to your channel and watching as many as I can to catch up to your latest. I just wanted to say, I admire you for what you have done going from working for the postal service, to doing what you do today. You went out there and grabbed what you wanted to do with both hands, and you've embraced that ever since. You work dammned hard and also play hard and I assume along the way you made a financial success of it all. Well done Andrew.
Thank you.
His drive and ambition probably robbed us of some sweet usps videos though.
Happy New Year to Andrew, Samantha, Cody, Blue and everyone else!
I second the wish to everyone.
RIP Levi.
ありがとうございます！
Every time Andrew works on something he says “you think they would design this better“ that’s classic Andrew.
I swear he has to have the most honest smile. I always smile when he smiles.
Andy, out of all the years I have been watching your channel this is the first time I have ever seen you take a vacation, IT'S ABOUT TIME. good for you, that's what great companionship does for you. Hold on tight my friend it's going to be one hell of a ride. Oh, by the way, great video too..
Really enjoyed this video, some great shots with the drone. Must of been a great vacation and I hope Sam had a great time
Looks like you had a great time. I'm an old time body shop owner, and I cringed when the bondo came out. Bondo is made with talc, and talc is an absorbent,like speedy-dry. Next time you fix it, use a waterproof body filler. When folks would try to fix their own body rot it would usually get worse,because the bondo absorbed moisture and kept it next to the metal. Great videos, I really enjoy them
Thanks!
Thank you.
That trusty ORANGE RATCHET, hammer, prybar has been one of your BEST TOOLS! AND that water is making me COLD as I look at the calendar! Be well!
WoW what a trip and many thanks for taking us with you, Very impressed with the trip thanks.
The “click click” killed me 😂😂😂 I’m using that next time I’m tightening something down!
Check Waldo's World, he does that all the time, its hilarious.
Great Vacation video, lots of exploring and fun. Loved the flying tow-ables 😍
I'm impressed with your partner! She seems really intuitive. You are very, very lucky
Until he's not - she's gone.
Is it his partner? Or are they just good friends? Because she really is lovely. It would be great if they were a couple so to speak.
@David Handley they were but they broke up andrew confirmed it in the comments of one of the last videos
@@Jacobtheunwise thats a shame..
They broke up months ago. She said it was a toxic relationship and she had to remove herself from it.
Andrew you are the best person so kind I never heard a bad word in your videos it's a dream to have a friend like you I will never going to stop you watching love your videos. I wish to work with good people.😃😃😃
thank you for another awesome video Andrew. this is the exact definition of what it's like to live the American dream. great camera work as always. Its nice to see the girl having a great time, she will remember these moments as the highlights of her life as she grows old.
Oh my! Girls don't grow old! Like fine wines, they mature.
An hour of Andrew, Sam, jetskis and amazing scenery !!! Magic !
is Sam and Andrew still an item ?
I believe so, she was in the latest video about a log forwarder.
@@steveharleyfan Thanks for that I wasn't sure
That squirrel was something else!
I love the machines and construction projects but I will watch a Camarata travel vlog ANY TIME! I was cracking up at the "farther" vs "further" conundrum!🤣You two are adorable together!
Thanks for sharing, Andrew! Lots of fun for us as well! Happy New Year, stay well, stay safe!
The Camarata Torque Wrench,,,,CLICK CLICK… love it!
Heck yeah brother! Thank you Andrew for posting another season of pwc’s.
That was the fastest hour in awhile. Love your videos, so well made
Good to see you come out with this. We were all missing it last summer!
Been a huge fan of yours for a long time man! Keep up the awesome content.
Hi Andrew Happy New Year buddy to you and yours. Looking forward to your content for 2023. A trick a gardening buddy of mine and I have found the resin works really well on the under side of mower decks clean out thoroughly then paint on stops grass sticking and rotting the decks.
Thanks for this video. Brings back many memories from the early 80s tubing north of West Point and Newburgh
Very good video Andrew, that is the life right there. live it while you two can. life goes buy so fast. keep up the great videos.
Thanks for taking us along on your fun adventures.
These yearly Wave runner videos are honestly my favorite
Although it makes us realize we are in winter. 😀
Looking forward to the trail grooming video
Same
atv's, snowmobiles, and wave runners stopped being made good awhile ago. I like the older made stuff from year's ago, lasts longer without all the digital junk, and they just made better stuff year's ago. Thanks for the video. G-d bless y'all.
That is certainly some beautiful country. I love the style of the buildings too.
Great video...nice to see ya'll take some time away from the motors. Great drone footage and beautiful country.
12:38 special appearance by Dan Wheeler’s wife.
41:27 Sam goes flying.
What a wonderful trip at the end.
It was amazing watching Dan and her put a roof on at their age. Very capable people.
And at 9:25 a special appearance by bigfoot. lol
Who is Dan wheeler?
@@4lifejeph Dan is also a UA-camr in upstate NY. Dan and his son, Jesse, helped Andrew add on to the Castle. That was a epic 3 hour video. Dan’s wife, mrs W, is and ultra distance trail runner, singer, musician, song writer.
Ok now I sound like I know too much.
@@piquat1 hope Bigfoot knows how to repair and operate heavy equipment.
Awesome guys. Thanks for taking us along on your vacation.
The music overlay with the drone footage of the old inn was amazing
Instantly recognized the mallets bay boat launch. Hope you enjoyed your stay in VT. Love the content
Great video. The arsenal looks cool. You two seem to get along well!
Awesome video Andy being Andy. You two make a good pair.
Always entertaining .. great fun! Awesome repair work! Cute squirrel .. interesting and beautiful places!
Really enjoyed this & seeing that you have a personal life & having fun. Also getting to know Sam better!
Cute baby squirrel. Cool camping adventure and neat old inn!
Relaxing video to watch for the start of 2023!
That was great to watch. I remember the visit to the Statue of Liberty, which impressed me a lot. Hope the repairs are OK. You may have to do it some more. Difficult to see how you could get a permanent repair though. Thanks, I enjoyed that a lot :)
You are living the dream my friends. Up state is so beautiful. Thanks for the tour.👍😎🇫🇷
The choice of music during the drone shot of the resort was so fitting. 😁Well done Andrew!
One of the only content creators that I can watch hour long videos of, They are so therapeutic.
Abuse is not "bad design". Nice job on the repair!
So glad to see y’all having fun, since y’all work all the time.
Fibreglass thing I saw a while back which is super useful. Cut up some 1" square of fibre, then pull it apart into just the threads. Mix that into a pot of resin and use that for the initial repair, like a paste. Then lay sheets over the top at the end.
Andrew I hate to see your stuff broke BUT I love to see you fix them!
Fiberglass is supposedly pretty hazardous to sand without good breathing protection.
I've taken to wearing PPE when sanding anything. Instead of always trying to determine if I should or shouldn't, might as well for the few minutes and never thinking about it again.
Sanding fiberglass without breathing protection WILL lead to seriously lung issues.
I had a friend who didn't listen when I told him to.
He's now on oxygen the rest of his life no more time out in his boat he fiberglassed several times.
The same with grinding or danding pretty much anything.
Out lungi have no filter capacity.
Sanding and breathing rust can actually kill you.
As long as you don’t stand there and inhale the dust you make directly into your lungs, you’ll be fine. You just have to use a little common sense.
@@mikeznel6048 He's sanding right next to his living room/kitchen. It's a very bad idea. Also the dogs are walking around and through all that dust.
@@devinjohnson8623 At work we grind tons of stainless steel, which gives off hexavalent chromium but noone wears masks, it's one of those things people take for granted. I'd rather look funny and not breath that all day.
Hoping to see more videos soon. Up an coming projects your the man when it comes to a project
This guy is the best. I look at all his cool shit and just smile and laugh. Totally deserves all of it and more. There are so many douchey YT'ers out there and our man AC ain't one of them!!
Great content Andrew. Looks like you had a fun summer. Happy New Year!!
💐💐💐💐 Anyone see the flowers and think of when Andrew showed his fake flowers from Castle? “Don’t have to water these, and they look good all year long, or something like that “. 😂😂😂 Great Video! Videos are even better with Andrew talking!
@ 17:40 ❤ You two are awesome! Keep the awesomeness!!
Andrew is going to be the first person to install a brush guard on a wave runner.
Did you mean rock guard, lol
Using a chainsaw!
@@jmwarden1 He just needs to build a aluminum mini jet boat
Really Great Video, Great camera work with Drone,
What kind of camera is he using at 32:00
I think andrew needs a mini jet boat like Cleetus Mcfarlands!
Amazing video bro... This video was a year in the making and was worth the wait. Great job!
We're so used to seeing you working in videos....it's kinda nice to see you just having fun
Most bulletproof and outstanding people!!!
When the hull is completely shot I would love to see you swap that powerplant into a jetstream mini jet boat and put that to the test. I think they are built to handle the type of riding you get into with a thick UHMW bottom protector.
Would definitely suit him better and can bring the pups easier aswell
That old Inn reminded me of the movie “The Shining” on the inside. Thanks for the tour of it.
I have owned boats for over 50 years from small John boats to my present 48 foot cruiser and none have ever been designed to hit rocks. Some aluminum or steel hulls are designed to withstand glancing blows but none designed to hit rockss
The exactly same thing happened to me Got towed back thought it was the end of our weekend up North but I took it apart in the parking lot and I was back in the water within the hour Weekend was saved. This is why I always carry tools in my truck.
I gota say, the coolest part of the video was the friendly baby squirrel! That was definitely a first. Looks like you enjoyed your summer Andrew 😎👍
And the fact the squirrel was not afraid of water (HYDROPHOBIA) means it was not rabid. or at least not showing signs :D
@@CDCanning definitely never saw one take a swim like that!
Butterfly migration...thru the Hill Country of Texas where sometimes there are so many you can't see the leaves on the trees because of the great numbers of Monarch butterflies. An awesome sight!
Loved the friendly squirrel.
Being that tame could be a sign of rabies in the animal.
I grew up in Plattsburgh so a big "thank you" for spending time on Lake Champlain and going to Valcore island. I live down south now and it always great to see the north country.