SC Project STR1 baffle / catalytic (off) for Yamaha Mt09
Вставка
- Опубліковано 5 вер 2024
- Thank you for watching anyone of my videos!
Show some love subscribe!
If you like to support me more
Sign up for Robinhood with my link and we'll both pick our own gift stock 🎁 join.robinhood...
Instagram - ...
Patreon - www.patreon.co...
www.motovation...
Video / audio - GoPro hero 8/11 Sony a1 or Sony a2 or 360 action cam
Music-
You have a great point,you get best of all worlds can’t wait to hear your fly by’s.
Right! great for people that want choices. I’ll be posting very soon I can’t wait 🙌🏼
Grear bike. Love youe mods. Greaf exhaust too. Might be too modern looking for nes XSR I just picked up but gonna consider anyway. Cheers
Yes I think is a bit modern for the Xsr nothing wrong with that I really want an Xsr 700 the older model
Great video! Where did you get those side covers? The ones right below the seat
again an excellent video, you are legendary. can't wait to see the videos of the steps with and without the db killer. but the db killer at the bottom is closed or has only a smaller diameter?
Thank you no problem soon I’ll be posting it. Yes it’s is definitely smaller diameter
but the smallest diameter is not closed right?
Very good video, totally necessary in the absence of information about this exhaust!
Because of you, I have made the reservation and I will have it in about 3-5 weeks.
Just one question, in order not to put the catalytic converter, is it enough not to put the metal "tube" or do I have to do something else?
Thank you very much for your contributions and keep it up, crack!
You are very welcome 🙏🏼 and thank you for watching it’s definitely appreciated for sure. This exhausted is designed to allow you to have it on or off for emissions I presume. Also, for the customers that want it loud.
Hey Chris, really appreciate your posts here. I recently installed the STR1 full exhaust system on my 23 mt09 and I’m getting that drone sound you mentioned. I kept the DB killer on but removed the cat.
Is this something we should expect or is there a way to get rid of the drone sound?
Love your posts man, keep em coming
Hey you’re welcome brother I unfortunately think we’re always going to have the drone no matter what we do
I like it…. The sound anyway!!!!
When you’re Riding it, it’s super loud for sure
Thank you for your detailed video. With the cat and baffle installed, would you say this exhaust is significantly louder than stock?
Yes it’s definitely louder with everything out. But with everything in it’s pretty quiet.
we need a video showing how do you remove the dbkiller bro
Sweet sound!! I wonder it can be fitted on Yamaha tracer 9....and also would the carbon fiber cover touch the swing arm as it seems too close to it...
I think it should fit if it’s the same mounting points for sure. Yes it does touch unfortunately I needed to do a better job installing it lol I just trim some of it off.
Holy shit bro this thing sounds like a BEAST 🤣
Yeah it’s better in person lol 😝
Hello, how were you able to get the baffle out even after removing the screw. I can't get it out, do you have a method to share with me? Thanks in advance.✌️
Add my Instagram I’ll send you a video
Do you need to take the carbon cover off to remove the baffle other than the welded bolt?
I got the same exhaust, I’ve taken the bolt off and tried pulling it out with a plier but it’s not coming out even with a lot of force.
If you put a hook style tool and pull out the baffle it should work
Hello, on the assembly of the exhaust did you remove the catalyst cartridge?
Sincerely.
Yeah took it out I might be putting it back to see with it sounds like
If it's to loud with the baffle out cut the baffle and put it back in.
I might run it with the cat on and baffle out will see
@@ChrisKrewzdid you end up running cat in no baffle
I ran no db killer with the cat and it basically sounded stock, no cat no db killer it drones and it’s quite loud on the bike but nobody I ride with says it’s obnoxious, actually everyone loves it but with the dna stage 2 the noise on the bike is a tad too much for me
Have you done a sound check with the catalyst in and baffle in?
What did you use to take out the dbkiller? I ve just got mine in black and dont want to damage it.
You will scratch it if it’s powder coated black unfortunately
Do you need a flash or retune with this exhaust?
Anytime you make a change to air or exhaust you will needed to tune to get the best performance out of the motor I currently don’t have the bikes fine
I like the side wing. Is that custom made?
Thank you it’s not custom it’s by puig you can just buy it for the bike
What I did with my previous bike. I started to drill holes in the baffle untill I liked the sound. Full baffle out is too much
Baffle out is loud lol I don’t know about drilling holes. I just might put it back on I’m gonna to test it out and see how I like it.
Believe me. It works
@@jackmavro3671 I believe you I just want to own it for more then a week before I put holes in it lol
@@ChrisKrewz lol.. 😆
How difficult was it to get the baffle out?! I have the black ceramic coated variant and i almost destroyed the baffle and it’s still not coming out…. They do a pretty shit job and ceramic coat everything assembled. Even the locking bolt was a pia to get off. Almost rounded the head
Pretty easy cut the tack weld off the bolt screw the bolt off with the L key then grab the baffle with like and L shaped hook. It’s just came out
@@ChrisKrewz i have the same problem cant get the baffle out. i got the bolt loose but baffle os stick like hell
@@sebastianhess8346 just grab some pliers and wiggle it out it should come out it’s nice a tight lol 😂
Did you end up running the exhaust with cat in and baffle out? How’d it sound?
I have not unfortunately soon
@@ChrisKrewz well let us know would ya, you’re influencing my buying decision haha
@@MrBinkz hahaha ok 👌🏼
Hmm what is that rattling tincan sound? Sounds like metal vibrating against metal can
When the baffles in it make a rattle sound out not so much
How to remove the db killer mate?
Bolt on the side that is tacked on that you’ll need to shave down then take off. Then just pull it out
its the kat in the system during whole video ?
No cat in this video
What do you think ?
@@ChrisKrewz thanks
does it scrath the rear swing arm, looks to lose to it
It did scratch it. I installed it to close I had to readjust it.
that is just cover right, you can make it shorter or something to prevent it?
@@aressimbamt0959 yes I needed to push it in some more and adjust it
3:12 does your swingarm have scratches from the carbon cover?
but you know that I also noticed the extreme proximity of the cover to the stove and I thought that perhaps it is at risk of rubbing with the movement of the suspension and the vibrations
@@pierofarisco8451 on his installation video you can see that the cover is actually touching the swingarm
I would try to space it with a couple of stainless steel washers. Excuse my english but i use google translate, i'm italian
It is touching my fault lol I just have to move it I got lazy it’s not scratched it’s dirty
I just rechecked it, it’s scratched :/ but you can put it on with touching it I was just careless
Hi, how much did you pay for that exhaust?
Shit not gonna lie I forgot lol 1,300 - 2000 I think 🤔
Can this exhaust be repack?
Wait what does that mean?
@@ChrisKrewz change the fibre in an aftermarket exhaust after a period of time
Do you need to tune it with this exhaust?
I don’t have one but technically with any exhaust you’ll need a tune to get the best out of it.
@@ChrisKrewz I think that's the reason for the droning sound. Maybe not good fuel to air ration with a full system without the tune.
@@Phantom_Yur yeah bike need the back pressure for sure
whare you get sport foot peg?
Got you brother I made a video of them
woodcraft-cfm.com/collections/parts-accessories/products/05-0419b-yamaha-mt09-2021-22-rearset-kit-complete-w-pedals
will it fit the 2022 xsr 900?
I don’t think so I believe some things changed
How the hell did you get the baffle out??
I can't get mine out or get it to move at all.
You have to break the weld then take the nut off and pull hard it’s better if you have something like a hook 🪝 to pull it out