July 20th 2023 I received two cameras yesterday I gave one to my friend for the birthday present and capital one for myself you're a good teacher I downloaded the site but have not logged in
Hi my bulb is set up and working however i dont get the light to light uo on motion detection. Why is that ? While i was doing the initial setup and test indoors with a lamp it worked. Now It only alarms and sends alerts when motion is detected but doesnt light up. The light works when i turn it on. When I set it to colourful night mode the light also turns on. When I turn it to Auto light it switches back to smart night mode... What am i doing wrong ?
I have one very simple question. Why does my camera not work when I unplug the USB? I assume it is supposed to work without being constantly plugged in
If you’re not here in the camera turn on you’re seeing a little red light light up and you’re obviously not power to the unit. Make sure the unit has power. If you have to do what’s called a hard reset there is a little black dot on the top of the camera by the SD card slot and you’re going to need a paperclip or a pushpin, but push this button and hold it for six seconds, and then let it go and reset itself
Good information. But, I purchased the exact same thing as your pictures. and there is ABSOLUTELY NOTHING on the back of mine where all your stickers and model # etc. by 2024 this thing has ripped me off, thru Amazon. I will try again and not get the $17.- ordered on Amazon
@@Gaily1 OK that’s not good. If you don’t have a barcode on there to scan the camera that it’s gonna be hard to be able to identify what camera it is. You know what you need to do is go to the store whether you have an iPhone or an android and you need to download yi lot app.
You use the wheel lot app to access the phone and basically just opened up the QR Scanner on your phone and then there is a little tiny hole on the top of the camera. It’s next to the SD card slot and if you get a tiny pushpin like a paperclip and you push that button there’s a little button stick the clip in the hole. You can feel the button push the button button down. You’ll feel the pushpin when you push the little rubber button button down be careful not to break the rubber button, but push down gently and you’ll hear it click and hold it down.
Hold it down for like six seconds while the camera is powered on and you will hear it beep twice beep beep and then take your phone with the QR code and hold it up to the front of that camera lens and then it’s gonna start going to do do do do do do do do do do do do do do you hear the camera making the noise and what it’s doing? Is it scanning, your phone
I just got mine today and I'm trying to take my time and set it up because I don't want to have to return it like I did the first one... which frustrated the heck out of me!😤
The same thing happened to me, and I almost gave up, but I was able to pair it after resetting and attempting to pair it 20+times. Try scanning your phone to the bulb and also try the bulb to the phone in a different angle and distance, but not farther than a foot distance. It will pair successfully without needing an SD card. We get what we paid for.🤣
Hi there drone racer. Thank you for the video. Tell me, we have 5 cameras around our home, we loaded them last week. We had a massive thunder storm a few days ago which messed up the wi fi cornection. We have since repaired the wi fi, we tried to set up the cameras with the new wi fi, they are not cornecting, we then deleted the 5 cameras, for some crazy reason, they are unable to cornect at all. I tested a new globe camera, identical as other the 5 globe cameras( it worked at once) no issues at all. Any idea how we can resolve this cornection issue? Thanks Noel. Would love to run a whats ap call with you whilst trying to install the globes..👍
Would Likely you fried these cameras? That’s my guess so these cameras are very very touchy when it comes to electrical surges listen to me this is what you need to do go on Temu TEMU and order you the same camera for eight dollars they’re eight dollars on the Temu websitethe same exact they are the same exact cameras. They are eight dollars on the Temu website.
👋🏽 Hey I just wanted to say Thank You Very Much 🙏🏽 You Rock 🎉💯🫶🏽👊🏽👏🏽👏🏽👏🏽 You are SUPERCALIFRAGILISTICEXPIALIDOCIOUS 🤸🏾♀️🤸🏽♂️🤸🏼🤸🏿♂️🤸🏻♀️I love TEMU ❤I THINK I AM ONE OF THEIR FAVORITE PEEPS🥰 Enjoy The rest of your week ☺️🫡
I’m using a camera that used to be on somebody else’s Wi-Fi and their account. I have set up a new account for me and a new Wi-Fi. Nothing works. I’ve been working on this off and on since last Friday I’m wondering if that has anything to do with it?
Hey my friend. I need your help. When I turn on my camera, it comes up on my wifi and I connect it. It gives me this message. "Connected without wifi." I can NOT get it to work. What am I doing wrong? Thanks for your time.
yr camera settings or hardware issue with camera do a master reset u will need to hard reset the camera there is a tiny hole by the sd card slot push and hold button for 5 sec and release to reset
I just set mine up. It said it's ready to use. Is there supposed to be a red light on it or something? I don't have an sd card yet. Is the camera supposed to move when it detects motion? It's not doing anything at all! Also, if I do get it to work; if the light switch happens to get shut off, do you have to set it up all over again once you turn the light switch on?
But if you just use an SD card does that mean you can't access live feed, or do you just have to watch what was recorded later when you get home? I need a live feed that I can monitor from work or wherever else away from home.
Months later ... by accident .. serendipitously falling backwards into knowledge from sheer ignorance ... If the camera wont pickup the internet (error code) CALL the internet provider (this can't be troubleshooted in their app). TELL them to put your wifi to 2G so that the camera can pick it up. It lasts an hr before it resets to 4/5G. THIS WORKS TO FIX THE MAIN PROBLEM THAT EVERYONE IS HAVING (beeping but not connecting). It did not fix slow internet, but it worked for the security features. With every new camera you MUST do this (reset it with a pin & find the cam or rename it) BUT you won't have to re-do it on the cameras already previously done unless you move, get a new phone or change wifi username/passwords. Good luck.
I paired the camera to my phone, when I did this the camera was not in the spot that I wanted to get video of, also I needed an SD card because I cannot connect it to my wifi, and need a direct contact. So, I put the SD card in when I received it, and put the camera into the light socket where I want to capture video. It is not connecting at all, and even with direct connect it is not connecting to the camera and phone. So my question is: When you first pair it or add it, does it have to be in the spot where you are going to use it? Or can you pair it, and then move the camera where you want to monitor.
You can hold the button there’s a little tiny button that you need to press with a needle and you can do a hard reset. Also make sure you have a son disk SD card some SD cards won’t work I use 156 gigs on disk
@@droneracerswarehouse7641 Ok, so after I do a hard reset, do I have to pair it at the outlet where it is going to be used, or can I do it in an easier spot and then move it where it is going to be used? I know where the little button is, it is right above where the SD card goes in. Thank you for your response.
Hi there drone racer. Thank you for the video. Tell me, we have 5 cameras around our home, we loaded them last week. We had a massive thunder storm a few days ago which messed up the wi fi cornection. We have since repaired the wi fi, we tried to set up the cameras with the new wi fi, they are not cornecting, we then deleted the 5 cameras, for some crazy reason, they are unable to cornect at all. I tested a new globe camera, identical as other the 5 globe cameras( it worked at once) no issues at all. Any idea how we can resolve this cornection issue? Thanks Noel. Would love to run a whats ap call with you whilst trying to install the globes..👍
I don't have traditional lights. My camera came with two AAA batteries in the brown cardboard piece. I can't find any video or instructions to show where those two batteries go. Does anyone know 🤔
@droneracerswarehouse7641 Hi, I downloaded the yilot app to complete the installation they need my credit card no. No lock for the page. I scanned QR code that is stickered to the lightbulb it gives me about 20 letters and numbers to a web site show Malibu card and others. Please help I did order mine from temu, I got you get credited.
Where can I sign on to use the camera The camera I got didn't even come with a name on it. It looks like this camera but I'm not sure if it is. Is this a general assistance?
they record all day 24 7 and u can see on yr phone in real time. see my video i have another one i made thta explsains wifi set up and please subscribe !thanks for watcng if u need me help call me 9124287049!
Please if i connect to the wifi camera i can no longee accwss internet connection because the wifi those not have intenet connect so i am stuckz is there a way to use wifi and data together??
My camera instructions asked for a subscription of 4.99 a week, 2.49 a month or 1.49 a month. It's the same camera that you have. What I'm asking you is, do I absolutely need to have a subscription to use the camera?
Make sure the cameras plugged in when you plug the camera in and it receives power. You will hear it power up and it will say camera on and you should hear a beep a series of beeps and that will let you know that the You Tube that Bluetooth is active and you want to turn your Bluetooth on your phone and look for, the cameras and then click on the cameras
Does it work without internet I need something that don't work to where you have to have internet I'm using stealth cams that I use for hunting around my house and property but I want something that I don't have to have the internet that works better
Well, it will work you would just have to use the SD card and then you can only record for however, long, the SD card will let you record and you will have to go into a relapse
I got two this weekend and I set them up at my moms house. They work pretty good. I got a sd card for them and it records everything. I dont understand why you would pay for the cloud subscriction for. You literally just gave them some money. sd card is the way to go.
Yes, that part is confusing. Most people that think they have to have it will buy the cloud you know but you don’t have to have it, but they do that so they can make money.
@@jimmiemccormick853 The same thing happened to me, and I almost gave up, but I was able to pair it after resetting and attempting to pair it 20+times. Try scanning your phone to the bulb and also try the bulb to the phone in a different angle and distance, but not farther than a foot distance. It will pair successfully without needing an SD card. We get what we paid for.🤣
@@1handsmoke565 I see it fine cause it’s hooked to the 2.4 Wi-Fi, but the Wi-Fi won’t work in my garage. Strange cause my garage is a part of the house, have to figure it out. I also keep getting notifications of activity, not sure when it is real or not, you know “ the boy that cried wolf “ ?
There is a power issue apparently u aren’t getting a power supply correctly to the camera. When it powers up the red light comes on and it beeps … find a lamp and plug it in a lamp. Turn the lamp switch on just like u were turning on the light on the lamp . Wait 2 min it will beep the red light will come on if it doesn’t beep if the red light does not come on then it means that you are not getting power try a different lamp try testing the wall on the outlet and make sure that it has power plug something else into the outlet and make sure that the camera is getting electricity. and if that doesn’t work, there is a little tiny black button on the very top of the camera while it is plugged in and turned on get a paper clip and push that black button and hold that black button for 60 seconds and do a hard reset on the camera, sometimes this will work and if that doesn’t work, call me 912-428-7049 I can walk you through whatever other problems you might have over the phone. There is a chance you could have a faulty camera I might add did you put a Sim card in there? Make sure you put your Sim card in there.
@droneracerswarehouse7641 did all that..I put it in different lamps and other light sockets it didn't turn did the reset nothing..regular light bulbs work on those same locations. I bought a different brand light bulb cameras and it worked perfectly but that brand you showing won't work
OK, you have to get a pin and on the top of the camera. There’s a tiny little hole push that button and hold and hold it for like five seconds it will start beeping. This will do a hard reset on your camera and you can start downloading your camera.
Hey, love ur video!!! Ok my problem is that it only records for 6 or 7 seconds! What good is that?!!! Do i need a SD card for it to record longer? I don't have a SD card. Thanks!
I tried to find out where the account number. Which I didn't locate. I have the app, but couldn't find the account number. Please explain more clearly. This wasn't helpful.
Why don't people just try to be a bit kinder (or less damn harsh) as others learn HOW to show us best they can? This could be this man's start up side hustle ... as in to feed his family/himself ... this new video tutorial - & It's obviously not yet taken off. If you, like the rest of us, that are on here (for troubleshooting & missing instructions pamphlet) you obviously need his help soooo be nice. Or move on to the other camera light bulb tutorial that is on here = 29 mins. Maybe that one will work out for your or mine personality? SIMPLE. NO need for people to trash someone because they did not fancy his style nor find his approach and technique helpful. Being nasty is helping how exactly? Let's leave the bullies & trolls for corporate/work. 💯
The app to use this this has got to have at least 50 other rip off programs in bedded in the program. In such a way that it seems that it's for the cam .IT IS NOT. When it asks for a credit card or other pay. Don't do it or you can and watch them take your money. If you get by that problem . Connect is still crap . Multiple issues
I can't even log in. I've hard reset it & done whatever else I could do. Tried to delete my account, which it won't delete to use another account that won't work. After about 3 hours of not getting the camera to work, I decided to call it the night & try the next day, which where Im at now. Not being able to log in. & thats not counting the 8 months of off & on trying to get this piece of 💩 to work.
Go to the Welland website download the new firmware onto an SD card and then put the SD card in your camera and upload the new firmware into your camera. Push the reset button and hold it and this will reset the hardware the new firmware on your SD card to your camera.
thats very helpful to know>> I would never had no idea that could affect someone>>>I made another video that is much better than this one>> I could have put on a silk shirt and some slacks .. but i did in the much better version . check out the other video and maybe u will like better
Why don't people just try to be a bit kinder (or less damn harsh) as others learn HOW to show us best they can? This could be this man's start up side hustle ... as in to feed his family/himself ... this new video tutorial - & It's obviously not yet taken off. If you, like the rest of us, that are on here (for troubleshooting & missing instructions pamphlet) you obviously need his help soooo be nice. Or move on to the other camera light bulb tutorial that is on here = 29 mins. Maybe that one will work out for your or mine personality? SIMPLE. NO need for people to trash someone because they did not fancy his style nor find his approach and technique helpful. Being nasty is helping how exactly? Let's leave the bullies & trolls for corporate/work. 💯
First off you talk way too much and you haven't shown anyone initial set up like setting the gimbal on an outdoor camera to return to point a where you want it. That should be shown if you're claiming to be showing how to do everything about these cameras. I think you like hearing yourself talk. Have a great day
Why don't people just try to be a bit kinder (or less damn harsh) as others learn HOW to show us best they can? This could be this man's start up side hustle ... as in to feed his family/himself ... this new video tutorial - & It's obviously not yet taken off. If you, like the rest of us, that are on here (for troubleshooting & missing instructions pamphlet) you obviously need his help soooo be nice. Or move on to the other camera light bulb tutorial that is on here = 29 mins. Maybe that one will work out for your or mine personality? SIMPLE. NO need for people to trash someone because they did not fancy his style nor find his approach and technique helpful. Being nasty is helping how exactly? Let's leave the bullies & trolls for corporate/work. 💯
This camera lasted less time than others..I have their waterproof Yi lasted almost six months...have had a symelac for a year no problem costs more..this one was 23 dollars wonder why
Why don't people just try to be a bit kinder (or less damn harsh) as others learn HOW to show us best they can? This could be this man's start up side hustle ... as in to feed his family/himself ... this new video tutorial - & It's obviously not yet taken off. If you, like the rest of us, that are on here (for troubleshooting & missing instructions pamphlet) you obviously need his help soooo be nice. Or move on to the other camera light bulb tutorial that is on here = 29 mins. Maybe that one will work out for your or mine personality? SIMPLE. NO need for people to trash someone because they did not fancy his style nor find his approach and technique helpful. Being nasty is helping how exactly? Let's leave the bullies & trolls for corporate/work. 💯
I’m not trying to sell anything and I don’t work for this camera company and I don’t promote their products. I was just showing everyone how to set the camera up while I was sitting at my camera, so I hope this helped you out in anyway.
Why don't people just try to be a bit kinder (or less damn harsh) as others learn HOW to show us best they can? This could be this man's start up side hustle ... as in to feed his family/himself ... this new video tutorial - & It's obviously not yet taken off. If you, like the rest of us, that are on here (for troubleshooting & missing instructions pamphlet) you obviously need his help soooo be nice. Or move on to the other camera light bulb tutorial that is on here = 29 mins. Maybe that one will work out for your or mine personality? SIMPLE. NO need for people to trash someone because they did not fancy his style nor find his approach and technique helpful. Being nasty is helping how exactly? Let's leave the bullies & trolls for corporate/work. 💯.
Why don't people just try to be a bit kinder (or less damn harsh) as others learn HOW to show us best they can? This could be this man's start up side hustle ... as in to feed his family/himself ... this new video tutorial - & It's obviously not yet taken off. If you, like the rest of us, that are on here (for troubleshooting & missing instructions pamphlet) you obviously need his help soooo be nice. Or move on to the other camera light bulb tutorial that is on here = 29 mins. Maybe that one will work out for your or mine personality? SIMPLE. NO need for people to trash someone because they did not fancy his style nor find his approach and technique helpful. Being nasty is helping how exactly? Let's leave the bullies & trolls for corporate/work. 💯
@@ND-or5so I still haven't set up the stupid camera. I put it back in the box and haven't touched it since. Maybe someday when I have the patience of a saint I might try again.Who knows?
Android phone works just as good. If you’re having issues with the firmware might be corrupt and you might need to go to the website and download the firmware onto an SD card to update the camera if the reset button is not working.
Thank you for walking us through the setup. It was very easy to understand. Thank you again
You are welcome
Play subscribers I don’t have many subscribers
thanmk you please subscribe
please subscribe!!
July 20th 2023
I received two cameras yesterday I gave one to my friend for the birthday present and capital one for myself you're a good teacher I downloaded the site but have not logged in
glad i could help
Hi my bulb is set up and working however i dont get the light to light uo on motion detection. Why is that ? While i was doing the initial setup and test indoors with a lamp it worked. Now It only alarms and sends alerts when motion is detected but doesnt light up. The light works when i turn it on. When I set it to colourful night mode the light also turns on. When I turn it to Auto light it switches back to smart night mode... What am i doing wrong ?
I have one very simple question. Why does my camera not work when I unplug the USB? I assume it is supposed to work without being constantly plugged in
It Hass to be plugged in in order for it to work. It must have a power source in order for it to work.
Why won’t mine turn on? I plugged it in different outlets and used extension cords everything really… any advice?? Appreciate it 🙏🏽
If you’re not here in the camera turn on you’re seeing a little red light light up and you’re obviously not power to the unit. Make sure the unit has power. If you have to do what’s called a hard reset there is a little black dot on the top of the camera by the SD card slot and you’re going to need a paperclip or a pushpin, but push this button and hold it for six seconds, and then let it go and reset itself
Good information. But,
I purchased the exact same thing as your pictures. and there is ABSOLUTELY NOTHING on the back of mine where all your stickers and model # etc.
by 2024 this thing has ripped me off, thru Amazon.
I will try again and not get the $17.- ordered on Amazon
@@Gaily1 OK that’s not good. If you don’t have a barcode on there to scan the camera that it’s gonna be hard to be able to identify what camera it is. You know what you need to do is go to the store whether you have an iPhone or an android and you need to download yi lot app.
You use the wheel lot app to access the phone and basically just opened up the QR Scanner on your phone and then there is a little tiny hole on the top of the camera. It’s next to the SD card slot and if you get a tiny pushpin like a paperclip and you push that button there’s a little button stick the clip in the hole. You can feel the button push the button button down. You’ll feel the pushpin when you push the little rubber button button down be careful not to break the rubber button, but push down gently and you’ll hear it click and hold it down.
Hold it down for like six seconds while the camera is powered on and you will hear it beep twice beep beep and then take your phone with the QR code and hold it up to the front of that camera lens and then it’s gonna start going to do do do do do do do do do do do do do do you hear the camera making the noise and what it’s doing? Is it scanning, your phone
I just got mine today and I'm trying to take my time and set it up because I don't want to have to return it like I did the first one... which frustrated the heck out of me!😤
@@BeverlyLedbetter-cb1971 do u need my help
Thank you soo much I was able to get mines hooked up perfectly with your help!!
thats awesome i hope u subscribe
I have pushed the reset button several times and it will not pair up. 😢😢 do you have to have the SD card for it to even work?
I watched another video they said press that you heard reset even if you didn't
No. I used mine with no sd card.
The same thing happened to me, and I almost gave up, but I was able to pair it after resetting and attempting to pair it 20+times. Try scanning your phone to the bulb and also try the bulb to the phone in a different angle and distance, but not farther than a foot distance. It will pair successfully without needing an SD card. We get what we paid for.🤣
Hi there drone racer.
Thank you for the video.
Tell me,
we have 5 cameras around our home, we loaded them last week.
We had a massive thunder storm a few days ago which messed up the wi fi cornection.
We have since repaired the wi fi,
we tried to set up the cameras with the new wi fi, they are not cornecting, we then deleted the 5 cameras, for some crazy reason, they are unable to cornect at all.
I tested a new globe camera, identical as other the 5 globe cameras( it worked at once) no issues at all.
Any idea how we can resolve this cornection issue?
Thanks Noel.
Would love to run a whats ap call with you whilst trying to install the globes..👍
Would Likely you fried these cameras? That’s my guess so these cameras are very very touchy when it comes to electrical surges listen to me this is what you need to do go on Temu TEMU and order you the same camera for eight dollars they’re eight dollars on the Temu websitethe same exact they are the same exact cameras. They are eight dollars on the Temu website.
👋🏽 Hey I just wanted to say Thank You Very Much 🙏🏽 You Rock 🎉💯🫶🏽👊🏽👏🏽👏🏽👏🏽 You are SUPERCALIFRAGILISTICEXPIALIDOCIOUS 🤸🏾♀️🤸🏽♂️🤸🏼🤸🏿♂️🤸🏻♀️I love TEMU ❤I THINK I AM ONE OF THEIR FAVORITE PEEPS🥰 Enjoy The rest of your week ☺️🫡
I appreciate that such a nice thing to say
I just got mine does it use a usb micro to charge it ?
For anyone wondering the direct tutorial starts at 5:52
i updated and made a new video and i get right too it. thanks for pointing that out
Wait so the only way it will work it has to be connected to a lamp??
Hello.
I bought this camera, but it doesn't have a barcode.
in this case, how do I connect the camera to the mobile phone?
Thank you very much
I’m using a camera that used to be on somebody else’s Wi-Fi and their account. I have set up a new account for me and a new Wi-Fi. Nothing works. I’ve been working on this off and on since last Friday I’m wondering if that has anything to do with it?
@@tammycockerham7122 can u call me at 912 428 7049
It should have a barcode on the back of the camera. You can link that with a Camera on your phone.
Hey my friend. I need your help. When I turn on my camera, it comes up on my wifi and I connect it. It gives me this message. "Connected without wifi." I can NOT get it to work. What am I doing wrong? Thanks for your time.
yr camera settings or hardware issue with camera do a master reset
u will need to hard reset the camera there is a tiny hole by the sd card slot push and hold button for 5 sec and release to reset
@@droneracerswarehouse7641
Thanks, but I have several times. Camera must be defected.
You can also go online take the SD card and go to Rilatt website and download firmware on to the SD card and installed into the camera
@@droneracerswarehouse7641
Thank you. I'll do that.
Hi there
Thanks for the vid! Very helpful.
Help, Ive tried it a million times and cant get it to connect. I was told these are so simple and I cant get it to work.
How can I help you?
U may not have power if it’s not making a noise or if the red light doesn’t come on
Mine wont connect either
You must not be getting power to the device
Skil ishev im 10 and i got it working
Will this take a 256 gig SD card? What is the size limit? Also I missed your link to buying one of these for $8 online.
Yes
There is no limit, but you can use any SD cards you want. Just use the biggest one you can it it holds the most information.
There is no limit, but you can use any SD cards you want. Just use the biggest one you can it it holds the most information.
Yes
I just set mine up. It said it's ready to use. Is there supposed to be a red light on it or something? I don't have an sd card yet. Is the camera supposed to move when it detects motion? It's not doing anything at all! Also, if I do get it to work; if the light switch happens to get shut off, do you have to set it up all over again once you turn the light switch on?
yes u can set up motion detect in yr settings. click the settings wheel looks like a round gear or sprocket click on that and will taKE U TO SETTINGS.
But if you just use an SD card does that mean you can't access live feed, or do you just have to watch what was recorded later when you get home? I need a live feed that I can monitor from work or wherever else away from home.
No, you can access the live feed. You just have to subscribe to a cloud where you can save your data.
No, you can access the live feed. You just have to subscribe to a cloud where you can save your data.
Bro….what are those 8 or 9 circular things on the bulb? They surround the lens and I can’t read them.
led lights they will light up the entire room
Will this camera take a 1 tb micro SD card or does it need to be less?
Yes and the other cameras it sounds like u fried them I’ve done this to my cameras before you need surge protection
I think your video is awesome. Good job buddy
Months later ... by accident .. serendipitously falling backwards into knowledge from sheer ignorance ...
If the camera wont pickup the internet (error code) CALL the internet provider (this can't be troubleshooted in their app).
TELL them to put your wifi to 2G so that the camera can pick it up. It lasts an hr before it resets to 4/5G.
THIS WORKS TO FIX THE MAIN PROBLEM THAT EVERYONE IS HAVING (beeping but not connecting).
It did not fix slow internet, but it worked for the security features.
With every new camera you MUST do this (reset it with a pin & find the cam or rename it) BUT you won't have to re-do it on the cameras already previously done unless you move, get a new phone or change wifi username/passwords.
Good luck.
I paired the camera to my phone, when I did this the camera was not in the spot that I wanted to get video of, also I needed an SD card because I cannot connect it to my wifi, and need a direct contact. So, I put the SD card in when I received it, and put the camera into the light socket where I want to capture video. It is not connecting at all, and even with direct connect it is not connecting to the camera and phone.
So my question is: When you first pair it or add it, does it have to be in the spot where you are going to use it? Or can you pair it, and then move the camera where you want to monitor.
You can hold the button there’s a little tiny button that you need to press with a needle and you can do a hard reset. Also make sure you have a son disk SD card some SD cards won’t work I use 156 gigs on disk
@@droneracerswarehouse7641 Ok, so after I do a hard reset, do I have to pair it at the outlet where it is going to be used, or can I do it in an easier spot and then move it where it is going to be used? I know where the little button is, it is right above where the SD card goes in.
Thank you for your response.
yes @@fantandane1251
Hi there drone racer.
Thank you for the video.
Tell me,
we have 5 cameras around our home, we loaded them last week.
We had a massive thunder storm a few days ago which messed up the wi fi cornection.
We have since repaired the wi fi,
we tried to set up the cameras with the new wi fi, they are not cornecting, we then deleted the 5 cameras, for some crazy reason, they are unable to cornect at all.
I tested a new globe camera, identical as other the 5 globe cameras( it worked at once) no issues at all.
Any idea how we can resolve this cornection issue?
Thanks Noel.
Would love to run a whats ap call with you whilst trying to install the globes..👍
I just got one of these and it only works on 2.4g not on 5g systems.
I don't have traditional lights. My camera came with two AAA batteries in the brown cardboard piece. I can't find any video or instructions to show where those two batteries go. Does anyone know 🤔
hey can u giver me a call ill help u 912 428 7049
I can't get my camera to set up on my phone how do I do it can you help me..
What’s the problem
Check the power source to the camera make sure the light switch is turned o.
Call me 912-428-7049
@droneracerswarehouse7641 Hi, I downloaded the yilot app to complete the installation they need my credit card no. No lock for the page. I scanned QR code that is stickered to the lightbulb it gives me about 20 letters and numbers to a web site show Malibu card and others. Please help I did order mine from temu, I got you get credited.
ME TOO, ONLY ONE TIME ACTIVATE, AFTER THAT I UNABLE TO RESET AND USE IT AT MY HOMETOWN.
Where can I sign on to use the camera The camera I got didn't even come with a name on it. It looks like this camera but I'm not sure if it is. Is this a general assistance?
I'm watching u I got mines (2) plugged up and I hear them both beeping after they finished turning
Do you need home wifi to get this started ?.
no u can use your hot spot
Hi can these camera keep recording all day ...also can it be seen on your android phone
they record all day 24 7 and u can see on yr phone in real time. see my video i have another one i made thta explsains wifi set up and please subscribe !thanks for watcng if u need me help call me 9124287049!
What if there's no QR code on the camera, what can I do
Please if i connect to the wifi camera i can no longee accwss internet connection because the wifi those not have intenet connect so i am stuckz is there a way to use wifi and data together??
How do i make the camra aouto track? Plsssssss i need it
@@LukaKenchadze-bp3ek hi there go to yr setting s in yr app and u can find all the settings there
My camera instructions asked for a subscription of 4.99 a week, 2.49 a month or 1.49 a month.
It's the same camera that you have. What I'm asking you is, do I absolutely need to have a subscription to use the camera?
You don’t really need a prescription if you got SD card and you got a Wi-Fi cloud
Skip the added storage ☁️ subscription ploy it's just a sell it isn't needed
hi thanks for your help. how do i down load the scanner i need please. uk user
Hi there
Make sure the cameras plugged in when you plug the camera in and it receives power. You will hear it power up and it will say camera on and you should hear a beep a series of beeps and that will let you know that the You Tube that Bluetooth is active and you want to turn your Bluetooth on your phone and look for, the cameras and then click on the cameras
Go to play store down load the first feee scanner that pops up make sure it’s 5 stars
Does it work without internet I need something that don't work to where you have to have internet I'm using stealth cams that I use for hunting around my house and property but I want something that I don't have to have the internet that works better
U will need a power supply and if u do t have WiFi it won’t work
Well, it will work you would just have to use the SD card and then you can only record for however, long, the SD card will let you record and you will have to go into a relapse
Mine did not come with a QR CODE sticker on it
o no this could be a prob
I had 2 young neighbors trying to help me hook my bulb up. We haven't been able to connect
How to activate notifications? Thanks
Can you yell me what size sd card this takes
I got two this weekend and I set them up at my moms house. They work pretty good. I got a sd card for them and it records everything. I dont understand why you would pay for the cloud subscriction for. You literally just gave them some money. sd card is the way to go.
Yes, that part is confusing. Most people that think they have to have it will buy the cloud you know but you don’t have to have it, but they do that so they can make money.
you play guitar? Im a musician
I can’t watch anything from SD card, I get message: cannot connect to camera, please check your network.
Do you know how to set up a video durition to take a video.
hi there u can call me 912 428 7049
How to turn off beeping
u cant >> the beeping stops when it pairs to yr phone. turn on yr blue tooth settings and click on yr wilot light bulb
My cam wont pair after I scan the bar code .
It tells me to wait 1-2 minutes and then it tells me it failed ..
How do I get this cam to pair up ?? Dam
hi there and i hope i can help!!
u will need to hard reset the camera there is a tiny hole by the sd card slot push and hold button for 5 sec and release to reset
I have done that several times nothing. Do you have to have the SD card before they will work😢
@@jimmiemccormick853 The same thing happened to me, and I almost gave up, but I was able to pair it after resetting and attempting to pair it 20+times. Try scanning your phone to the bulb and also try the bulb to the phone in a different angle and distance, but not farther than a foot distance. It will pair successfully without needing an SD card. We get what we paid for.🤣
I just wated to know how to install SD Card.
U slide as card in the slot on top of the camera u will as a slot the card goes In the slot
But mine wont hook up to wifi, I dont understand
Really. Maybe try taking your camera to another part of the home first
I found out i had to hook up to 2.4g. Thanks for the reply bro
@@josepheaton5087
My question to you is how can you see the camera and what’s going on when you leave your home. Is there a hot spot or something
@@1handsmoke565 I see it fine cause it’s hooked to the 2.4 Wi-Fi, but the Wi-Fi won’t work in my garage. Strange cause my garage is a part of the house, have to figure it out. I also keep getting notifications of activity, not sure when it is real or not, you know “ the boy that cried wolf “ ?
Hey there thanks for watching
Can you use these with an Android phone or must you have iphone?
its all the same it works with both\
@@droneracerswarehouse7641 Thanks.🙂
no
I bought 2 from temu and both will not turn on at all
There is a power issue apparently u aren’t getting a power supply correctly to the camera. When it powers up the red light comes on and it beeps … find a lamp and plug it in a lamp. Turn the lamp switch on just like u were turning on the light on the lamp . Wait 2 min it will beep the red light will come on if it doesn’t beep if the red light does not come on then it means that you are not getting power try a different lamp try testing the wall on the outlet and make sure that it has power plug something else into the outlet and make sure that the camera is getting electricity. and if that doesn’t work, there is a little tiny black button on the very top of the camera while it is plugged in and turned on get a paper clip and push that black button and hold that black button for 60 seconds and do a hard reset on the camera, sometimes this will work and if that doesn’t work, call me 912-428-7049 I can walk you through whatever other problems you might have over the phone. There is a chance you could have a faulty camera I might add did you put a Sim card in there? Make sure you put your Sim card in there.
@droneracerswarehouse7641 did all that..I put it in different lamps and other light sockets it didn't turn did the reset nothing..regular light bulbs work on those same locations. I bought a different brand light bulb cameras and it worked perfectly but that brand you showing won't work
Me too, when I first got 2, only used 1 & had no problem setting up but it has been off for awhile now I can't set it back up. Worthless!!
Mine just keeps saying, please configure the network, don't beep at all.
OK, you have to get a pin and on the top of the camera. There’s a tiny little hole push that button and hold and hold it for like five seconds it will start beeping. This will do a hard reset on your camera and you can start downloading your camera.
YIIOT is bad, difficult to reset and activate.
I can't get pass instruction #4.
Hey, love ur video!!! Ok my problem is that it only records for 6 or 7 seconds! What good is that?!!! Do i need a SD card for it to record longer? I don't have a SD card. Thanks!
If i need a SD card, what kind do i buy? Thanks!
My camera it set up. But will not work with the light sucket. Only work with the wall plug.Help
hey there make sure your camera is getting power.
I paid for The cloud and the AI alert service and I’m not getting alerted. Help.
Go into settings and turn it on
Appreciate you bro😊
Mine quit working won't beep when I turn on the power anymore
And I didn't have no freaking bar code on the camera
how do i add a second camera on my phone
There is a little plus sign up in the top right hand corner you click on that place and then you can add a second camera
I tried to find out where the account number. Which I didn't locate. I have the app, but couldn't find the account number. Please explain more clearly. This wasn't helpful.
I tried connecting two cameras is not working please help me
Don't have a QR code to scan, no sticker on back of camera bulb.wishit was easy.no device # for me to pair
May I suggest VALIUM?
there isn't a volume on the camera
Why don't people just try to be a bit kinder (or less damn harsh) as others learn HOW to show us best they can?
This could be this man's start up side hustle ... as in to feed his family/himself ... this new video tutorial - & It's obviously not yet taken off.
If you, like the rest of us, that are on here (for troubleshooting & missing instructions pamphlet) you obviously need his help soooo be nice.
Or move on to the other camera light bulb tutorial that is on here = 29 mins. Maybe that one will work out for your or mine personality? SIMPLE.
NO need for people to trash someone because they did not fancy his style nor find his approach and technique helpful. Being nasty is helping how exactly?
Let's leave the bullies & trolls for corporate/work. 💯
What if ppl developed substance issues from a histories of abusive in a cruel world ... would you 🐝 KINDER
Mines keeps saying entering pair mode and not pairing
@@latonyamayes7636 there’s a black button by the SIM card slot press and hold for 6 seconds to reset camera
I'm not gonna give them access to my Facebook
I have an android how do I load camera
Go to your Bluetooth and select the camera or take your camera. Turn your camera on and scan the barcode please like and subscribe.
The app to use this this has got to have at least 50 other rip off programs in bedded in the program. In such a way that it seems that it's for the cam .IT IS NOT. When it asks for a credit card or other pay. Don't do it or you can and watch them take your money. If you get by that problem . Connect is still crap . Multiple issues
If anyone has the app that does not have viruses or malware. Send the sight to comments
Like EMU the bird! PRONOUNCED TEMU!
I can't even log in. I've hard reset it & done whatever else I could do. Tried to delete my account, which it won't delete to use another account that won't work. After about 3 hours of not getting the camera to work, I decided to call it the night & try the next day, which where Im at now. Not being able to log in. & thats not counting the 8 months of off & on trying to get this piece of 💩 to work.
Go to the Welland website download the new firmware onto an SD card and then put the SD card in your camera and upload the new firmware into your camera. Push the reset button and hold it and this will reset the hardware the new firmware on your SD card to your camera.
Getting dizzy ur moving to much I feel like throwing up 🤢
thats very helpful to know>> I would never had no idea that could affect someone>>>I made another video that is much better than this one>> I could have put on a silk shirt and some slacks .. but i did in the much better version . check out the other video and maybe u will like better
Why don't people just try to be a bit kinder (or less damn harsh) as others learn HOW to show us best they can?
This could be this man's start up side hustle ... as in to feed his family/himself ... this new video tutorial - & It's obviously not yet taken off.
If you, like the rest of us, that are on here (for troubleshooting & missing instructions pamphlet) you obviously need his help soooo be nice.
Or move on to the other camera light bulb tutorial that is on here = 29 mins. Maybe that one will work out for your or mine personality? SIMPLE.
NO need for people to trash someone because they did not fancy his style nor find his approach and technique helpful. Being nasty is helping how exactly?
Let's leave the bullies & trolls for corporate/work. 💯
THERES NO QR CODE ON MY CAMERA
look on yr directions or google wi Lot
I can help if u need my help
@@droneracerswarehouse7641 good because I’m getting ready to break this damn thing
I don’t have a code on my camera either
why is there no sound
if u dont hear any sounds u have a bad camera u shoulod hear beeps when u power it up make sure its hetting power
I just bought mine on temu for 4 dollars. No bullshit. 4 dollars. Same camera.
Actually i am wrong, i have the better camera, not the light bulb camera. Mine goes in the wall
there is no qr code on this camera
use yr wifi and subscribe to my channel
Why dose it want me to sign up for s monthly fee I'm not interested in paying 10 dollars a month 120.00 a year I'm retired and on s fixed income
The app is telling me the same. I don't have the money for that. Is there a free app?
No it's not simple
First off you talk way too much and you haven't shown anyone initial set up like setting the gimbal on an outdoor camera to return to point a where you want it. That should be shown if you're claiming to be showing how to do everything about these cameras. I think you like hearing yourself talk. Have a great day
sorry abou that ill be sure to talk about that i n the nexzt one if u haver any quest il be glad to answer
@@droneracerswarehouse7641 keep talking thats how you got those 16k views!!! Keep up the good work.
Why don't people just try to be a bit kinder (or less damn harsh) as others learn HOW to show us best they can?
This could be this man's start up side hustle ... as in to feed his family/himself ... this new video tutorial - & It's obviously not yet taken off.
If you, like the rest of us, that are on here (for troubleshooting & missing instructions pamphlet) you obviously need his help soooo be nice.
Or move on to the other camera light bulb tutorial that is on here = 29 mins. Maybe that one will work out for your or mine personality? SIMPLE.
NO need for people to trash someone because they did not fancy his style nor find his approach and technique helpful. Being nasty is helping how exactly?
Let's leave the bullies & trolls for corporate/work. 💯
not its not it suck my internet use off my phone. and it consistently makes a sound like a horn i turn it off
This camera lasted less time than others..I have their waterproof Yi lasted almost six months...have had a symelac for a year no problem costs more..this one was 23 dollars wonder why
What a goose
was i able to help u
What the app download to installed I lost the instruction paper
@@patiikorona3589 hi u can watch my video it explains how to turn them on
@@droneracerswarehouse7641there is no content to watch to show how it turns on so
ATTENTION FWD:FWD:FWD To 7:40/ 17:41☝️😒To get straight to the Punch ✊...Thank me later
Hi there how can I help u
Yes I have another video
Just skip the first 6 minutes,or you'll never ever get that life back.
Why don't people just try to be a bit kinder (or less damn harsh) as others learn HOW to show us best they can?
This could be this man's start up side hustle ... as in to feed his family/himself ... this new video tutorial - & It's obviously not yet taken off.
If you, like the rest of us, that are on here (for troubleshooting & missing instructions pamphlet) you obviously need his help soooo be nice.
Or move on to the other camera light bulb tutorial that is on here = 29 mins. Maybe that one will work out for your or mine personality? SIMPLE.
NO need for people to trash someone because they did not fancy his style nor find his approach and technique helpful. Being nasty is helping how exactly?
Let's leave the bullies & trolls for corporate/work. 💯
cmon - already bought the camera, why the sales pitch, title says this is to get how to set it up, etc. total waste of time
I’m not trying to sell anything and I don’t work for this camera company and I don’t promote their products. I was just showing everyone how to set the camera up while I was sitting at my camera, so I hope this helped you out in anyway.
Why don't people just try to be a bit kinder (or less damn harsh) as others learn HOW to show us best they can?
This could be this man's start up side hustle ... as in to feed his family/himself ... this new video tutorial - & It's obviously not yet taken off.
If you, like the rest of us, that are on here (for troubleshooting & missing instructions pamphlet) you obviously need his help soooo be nice.
Or move on to the other camera light bulb tutorial that is on here = 29 mins. Maybe that one will work out for your or mine personality? SIMPLE.
NO need for people to trash someone because they did not fancy his style nor find his approach and technique helpful. Being nasty is helping how exactly?
Let's leave the bullies & trolls for corporate/work. 💯.
Instructions would b nice!
912 428 7049
It comes with a panflit or Just Google it and it Will tell you how it works step by step
It is not simple and I was so frustrated and you didn't help with all the crap at the beginning before you got down to business!
Why don't people just try to be a bit kinder (or less damn harsh) as others learn HOW to show us best they can?
This could be this man's start up side hustle ... as in to feed his family/himself ... this new video tutorial - & It's obviously not yet taken off.
If you, like the rest of us, that are on here (for troubleshooting & missing instructions pamphlet) you obviously need his help soooo be nice.
Or move on to the other camera light bulb tutorial that is on here = 29 mins. Maybe that one will work out for your or mine personality? SIMPLE.
NO need for people to trash someone because they did not fancy his style nor find his approach and technique helpful. Being nasty is helping how exactly?
Let's leave the bullies & trolls for corporate/work. 💯
AHAHaveAHeart24:
Tell me about it! I hate the bullsh-t every video has to put in.
@blahwhatever123
We can't. That's called control. I can see you don't go on the net much with all the added bull.
@@ND-or5so I still haven't set up the stupid camera. I put it back in the box and haven't touched it since. Maybe someday when I have the patience of a saint I might try again.Who knows?
@@AKAGoldenHairSurpriseyea I'm having a hard time with this camera as well but its not a bulb one but it is a Yi iot.
Download the app but is asking for a $49.99 a month ????? you most be kidding me this is a ripoff !!! all around !!
No no no don’t do it
I must have missed the part where it's necessary to own an apple phone. I don't have one. I tried to make my Laptop do all the work--so far nuthin
You supposed to be able to use Android too. My manuel shows both apple & android play stores to use.
Android phone works just as good. If you’re having issues with the firmware might be corrupt and you might need to go to the website and download the firmware onto an SD card to update the camera if the reset button is not working.
Why are you shouting all the time?
ouch
Just a crap dont waste your money ant time ....
I'm beginning to agree with you
Where's the power button
There is no power button when u acre it in it’s powered up
😂😂😂
I have different camera than u
JUST A CRAP DONT BUY IT
Ÿiĺot
What a rip dont buy
Temue is in china
Yes we know this and its TEMU
I know what you did with your original lightbulb!!! 🤒😱🤯🌡️🔥💡🕯️💉🧲🚬☣️🆙