Yamaha HL500 Aberg replica walk around

Поділитися
Вставка
  • Опубліковано 4 лют 2025

КОМЕНТАРІ • 8

  • @davew9360
    @davew9360 3 роки тому

    Very nice build . Did not know these were built using a husky frame .

    • @afabman64
      @afabman64  3 роки тому

      Sorry for my late response. I think only the original prototype used the husky frame. After that they had a company build frames specific for the bike but they were modeled after the Husky frame.

  • @kevfinn8232
    @kevfinn8232 5 років тому

    Sweet looking replica you have there....

  • @gusdogbrownlab435
    @gusdogbrownlab435 4 місяці тому

    great bike build You just don't need the music....if I could call it that

  • @irod6503
    @irod6503 3 роки тому

    Great Job👍 Did you have to use a rm rear hub for it to work with the 79 rm 125 swingarm or were you able to use a yz hub & if so what year & model hub matched the swingarm?

    • @afabman64
      @afabman64  3 роки тому

      I used the original XT500 hub. the slots in the swingarm were the right size for the axle. I did have to make some spacers that were the right thickness because the RM swingarm is narrower.

  • @minhhieuvo9168
    @minhhieuvo9168 Рік тому

    can you make a video oil change of this bike. I can't see the oil drain bolt on frame, thanks!

    • @kevfinn8232
      @kevfinn8232 5 місяців тому

      If it's a HL frame or a replica the oil drain plug will be on the bottom of the square stanchion which runs down the centre of frame behind the engine as the oil doesn't run down the front like on the XT/TT. At 2:40min you'll see the plug, hope this helps you.