Many, many thanks for your guidance. I still had a few issues, but these were mainly caused by trying to copy only parts of the floppy disc contents. One of the discs was a demo disc for my Rodgers W5000 organ, and there were 2 levels of sub directories for each song. I was trying to copy each of the songs to a separate directory number. This caused chaos, so I had to remove all traces of my activity and start again, copying complete discs. I can now play the midi files and access the registrations. I can now begin to save my own registrations. Probably I will keep two USB sticks, one for back up. Thanks again!
Thank you! Thank you! Thank you! I have been pounding my head on this over the last couple of nights trying to figure this out. I have a Gotek emulator in an 1995 Jands Hog 250 Lighting console I am trying to restore and resurrect. I have also got a Korg Triton Synthesizer Rack Unit with a floppy that could use one of these.
Very useful video. But the computer I am using to tandem with an old cnc machine, wants discs formatted with FAT16. Using this software with windows 10 or 7 seems to always format at FAT 32.
There are third party software that allows you to Format in FAT16, but emulator may not be able to read it. So you try the FAT32 and format them on a PC not on the machine.
@@TECHNOLOGYTIPS101 thanks to you I finally managed to get the Ipcas software to work on my windows 7 machine which I put together for the support of older machine tools. So I got a 100 floppy images on the usb stick, but trying to operate it on my dos computer, again for dos based CNC equipment, I either get error 34 on the Gotek display, or the dos gives the abort, retry, fail message. Dos just can’t read the stick. Incidentally, I use Xtgold for manipulating dos, it is so quick and easy compared to the Dos commands. I would really appreciate any observations.
@@mikepollard727 I think you have the jumpers settings wrong. Please watch my complete video linked here to understand how this works ua-cam.com/video/6sldK7i5s6M/v-deo.html
It is not working, however it is because there is some problem with file explorer and the formated pendrive. I think is something related with permission, but I couldn't solve it.
I’m using windows 10 pro I cannot open the program unless I go back to windows xp however when I try to format a thumb drive I get an access denied! error I tried setting it to windows 7 and opening as administrator but that did not work , any help would be appreciated .
Hello. Recently I've downloaded and installed the program USB_Floppy_Manager_v140i and started using it. It works great, 100 floppy disks have been created on my USB. But every time I insert the USB on the computer or the machine, it reads the first floppy 000. How can I tell the USB to read other floppys like, for example, 001, 002, or 010 ? I mean, how can I tell the USB to start reading other floppy numbers whenever I insert the USB into the PC or a machine ?.
Greetings, Windows explorer can only see the first floppy, in order to access files or copy files to other floppy number from 001, to 099 you will need to use the actual Floppy Manger software. Watch this videos for details. ua-cam.com/video/6sldK7i5s6M/v-deo.html
Hi sir. my keyboard is YAMAHA PSR 6700 and when I insert the gotek the desk indicator on the keyboard stays on and red which not normal. i think there is a jumper configuration or i must update the gotek firmware. please help me on this because this keyboard is the best to me even after all these years. please help
Greetings, in order to help you with the exact match emulator I need to know the exact model number of the old original floppy drive in your YAMAHA Keyboard.
It does not work anymore. Some win10 updates and you cannot copy any file to disk unless you copy to the first one. The other 99 disks it appears to copy but the size is not updated and the file does not go to pen drive
It is still working for me despite my Windows 11 Updates. Make sure that you are logged in to Windows as an Administrator. Also, I know a lot of people who simply purchased a used Windows 7 laptop from eBay for less than $50 just for use with this. So there are many ways around it if it is not readable by Windows 10.
We're are trying to use a Miditemp with a Gotek USB Floppy Disk Emulator. Now we have two problems: 1) We can't connect the Gotek in the proper way. We tried all possible solutions and variations with jumpers, flatcable or config files. Miditemp doesn't recognize the Gotek. 2) Even if the Gotek displays the correct number of images of floppy disks on the 4GB USB stick, Miditemp doesn't see the midi files in those images. Not sure what software (Windows 10) to us for making images and putting files in those images. Can anyone help us with (step by step) instructions, software, links or whatever? Thanks.
@@stevetrevella Your floppy drive is a dual mode drive that has 1.0MB or 1.6MB modes. None of which is 720KB or 1.44MB so you can't use any generic emulator and you need to get a 1.6MB Emulator from the manufacturer. See the datasheet for your floppy drive www.farnell.com/datasheets/84521.pdf
I need to know what type of repair you want to see. For example: replacing a bad capacitor, Replacing the LCD display, replacing the LED light, Replacing the USB port etc.
Unfortunately this will not work on a Mac OS, however you could install BootCamp on your Mac and run Windows inside your Mac OS which will then allow you to install this program.
Many, many thanks for your guidance. I still had a few issues, but these were mainly caused by trying to copy only parts of the floppy disc contents. One of the discs was a demo disc for my Rodgers W5000 organ, and there were 2 levels of sub directories for each song. I was trying to copy each of the songs to a separate directory number. This caused chaos, so I had to remove all traces of my activity and start again, copying complete discs. I can now play the midi files and access the registrations. I can now begin to save my own registrations. Probably I will keep two USB sticks, one for back up. Thanks again!
You are very welcome!
FINALLY!!!! Thanks for the detailed run through, I couldn't figure out why My Doc's kept opening....now I know!
Glad I could help!
Thank you! Thank you! Thank you! I have been pounding my head on this over the last couple of nights trying to figure this out. I have a Gotek emulator in an 1995 Jands Hog 250 Lighting console I am trying to restore and resurrect. I have also got a Korg Triton Synthesizer Rack Unit with a floppy that could use one of these.
You are very welcome, and good luck with the project.
God bless you! This constant opening of the Documents folder was already driving me crazy.
Thank You!! Glad I could help, you may also be showered with God's blessings throughout your life!
Thank you so much for this video. Now I'm very happy with my USB-Floppy in the keyboard Yamaha PSR-740. All the best for you from Switzerland.
Great to hear, and you are welcome!
Simple and very well explained, thanks
You are welcome!
Very useful video. But the computer I am using to tandem with an old cnc machine, wants discs formatted with FAT16. Using this software with windows 10 or 7 seems to always format at FAT 32.
There are third party software that allows you to Format in FAT16, but emulator may not be able to read it. So you try the FAT32 and format them on a PC not on the machine.
@@TECHNOLOGYTIPS101 thanks to you I finally managed to get the Ipcas software to work on my windows 7 machine which I put together for the support of older machine tools. So I got a 100 floppy images on the usb stick, but trying to operate it on my dos computer, again for dos based CNC equipment, I either get error 34 on the Gotek display, or the dos gives the abort, retry, fail message. Dos just can’t read the stick. Incidentally, I use Xtgold for manipulating dos, it is so quick and easy compared to the Dos commands. I would really appreciate any observations.
@@mikepollard727 I think you have the jumpers settings wrong. Please watch my complete video linked here to understand how this works ua-cam.com/video/6sldK7i5s6M/v-deo.html
Please also explain how to add files to the partitions
For that I have a complete video here is the link ua-cam.com/video/6sldK7i5s6M/v-deo.html
very very helpful, that helped me a lot, thank you very much
You're welcome!
It is not working, however it is because there is some problem with file explorer and the formated pendrive. I think is something related with permission, but I couldn't solve it.
Run it as Administrator and it should work fine
@@TECHNOLOGYTIPS101 It worked with a pendrive with 1 GB size. Maybe it could have been the size of the other one (4GB) or some problem with it.
I’m using windows 10 pro I cannot open the program unless I go back to windows xp however when I try to format a thumb drive I get an access denied! error I tried setting it to windows 7 and opening as administrator but that did not work , any help would be appreciated .
Try using an 8GB flash drive, and try avoiding SanDisk brand.
Hello. Recently I've downloaded and installed the program USB_Floppy_Manager_v140i and started using it. It works great, 100 floppy disks have been created on my USB. But every time I insert the USB on the computer or the machine, it reads the first floppy 000. How can I tell the USB to read other floppys like, for example, 001, 002, or 010 ? I mean, how can I tell the USB to start reading other floppy numbers whenever I insert the USB into the PC or a machine ?.
Greetings, Windows explorer can only see the first floppy, in order to access files or copy files to other floppy number from 001, to 099 you will need to use the actual Floppy Manger software. Watch this videos for details. ua-cam.com/video/6sldK7i5s6M/v-deo.html
Hi sir. my keyboard is YAMAHA PSR 6700 and when I insert the gotek the desk indicator on the keyboard stays on and red which not normal. i think there is a jumper configuration or i must update the gotek firmware. please help me on this because this keyboard is the best to me even after all these years. please help
Greetings, in order to help you with the exact match emulator I need to know the exact model number of the old original floppy drive in your YAMAHA Keyboard.
It does not work anymore. Some win10 updates and you cannot copy any file to disk unless you copy to the first one. The other 99 disks it appears to copy but the size is not updated and the file does not go to pen drive
It is still working for me despite my Windows 11 Updates. Make sure that you are logged in to Windows as an Administrator. Also, I know a lot of people who simply purchased a used Windows 7 laptop from eBay for less than $50 just for use with this. So there are many ways around it if it is not readable by Windows 10.
We're are trying to use a Miditemp with a Gotek USB Floppy Disk Emulator. Now we have two problems: 1) We can't connect the Gotek in the proper way. We tried all possible solutions and variations with jumpers, flatcable or config files. Miditemp doesn't recognize the Gotek. 2) Even if the Gotek displays the correct number of images of floppy disks on the 4GB USB stick, Miditemp doesn't see the midi files in those images. Not sure what software (Windows 10) to us for making images and putting files in those images. Can anyone help us with (step by step) instructions, software, links or whatever? Thanks.
In order to help you I need to know the exact model number of the floppy drive that came out of the MIDItemp
Thanks for yr videos.
I have a u13 cnc using 720kb floppy. I got a emulator loading files on USB all fine. But the cnc can't find the files
No problem, I need to know the exact model number of your old floppy drive which came out of the machine.
@@TECHNOLOGYTIPS101 the floppy drive is
A sticker on it says
Teac fd235f
P/n 19307331-39
The emulator is
fdd-udd u720k
@@TECHNOLOGYTIPS101 thanks
@@stevetrevella Your floppy drive is a dual mode drive that has 1.0MB or 1.6MB modes. None of which is 720KB or 1.44MB so you can't use any generic emulator and you need to get a 1.6MB Emulator from the manufacturer. See the datasheet for your floppy drive www.farnell.com/datasheets/84521.pdf
@@stevetrevella No problem my friend!
hi followed you setup video
but when i go to open the flopy drive i get an error message saying acces denied any ideas regards kev
You need to be logged in as Administrator and run the program as administrator. Then it will not deny any access to you.
Can anyone say where can i get that Usb v.1.40 that app that is shown in the video
Hi. No problem I will send you the link to download.
Very good explained. 👋
Thanks, I am glad it was helpful!
MY drive is not detected in the software, i ran with compatibility window 7, also ran with admin still not detected. plz help
You forgot to mention what operating system you have, you only said I run it in Windows 7 Compatibility Mode.
Please USB floppy drive full repair video create and upload video
I need to know what type of repair you want to see. For example: replacing a bad capacitor, Replacing the LCD display, replacing the LED light, Replacing the USB port etc.
Great job, thank you very much
No problem, I am glad it was helpful
Hi i have some problem. When i try to uppload USB directory it open the explorer ??
You need to run it as administrator.
Hi. have try as you describe in video
it not work @@TECHNOLOGYTIPS101
@@gorangustavsson403 Sorry for the late reply I was out of town, so did it finally work for you?
No it not work @@TECHNOLOGYTIPS101
How to install this software into MacBook
Unfortunately this will not work on a Mac OS, however you could install BootCamp on your Mac and run Windows inside your Mac OS which will then allow you to install this program.
The system will not allow me to drag files from pc to Floppy .Manager page. I've tried 'run as administrator, ' Is windows 10 a problem?
Yes Windows 10 is the reason why. However if you follow all the steps I point out in this video you should be able to even run on Windows 10
many many thanks!!!!
You're very welcome!
I cant open the floppy bank it says the system cannot find path specified.im running windows 10 also.
Try running the application as Administrator and in Windows 7 Compatibility Mode.
Thank you
No problem!
SIRR, IT IS GREAT
Thank You!!
Technics KN 7000
Yes this will work for Technics SX KN-7000 Keyboard
1000 x THX
You are 1000 x Welcome :-)