syncing throttle bodies with carbtune pro Yamaha FZ-09/MT-09 2014 2015 2016
Вставка
- Опубліковано 18 січ 2023
- Part 41 of 46 playlist • Yamaha FZ-09/MT-09 201...
Valve Clearance Check and Adjustment on FZ 09, MT 09, FJ 09, Tracer 900, XSR 900, MT 09 Tracer, 2014 2015 2016 2017 2018 2019 2020
If you have any constructive criticism, corrections, or tricks to make the procedure easier, please leave a comment.
Before you forget, please subscribe and click the thumbs up (if you liked the video)….it will motivate me to make more content. If you don’t like the video, please tell me why in the comments so that I can improve…Thanks Robert
The videos were created when I adjusted the valves on my 2016 Yamaha FZ 09. The shots of the manual are taken from the 2014-2016 FZ 09 Yamaha service manual.
Disclaimer:
I have done my best to provide accurate information, but as with everything on UA-cam and in life, do your own due diligence(Due diligence is an investigation or review performed to confirm facts or details of a matter under consideration). I accept no responsibility for errors or omissions. Perform service at your own risk and liability. Check the service manual for your own particular year and model.
I can’t verify this, but the procedure performed for the actual valve clearance measurement, camshaft removal, bucket and shim removal, and timing chain/cam cap reinstallation should be similar for the above models and possibly for other similar motorcycles (Check the service manual for your own particular model cross referenced to the VIN).
For instance, the intake camshaft Yamaha part number 1RC-12170-00-00 CAMSHAFT ASSY 1 is used across the different models and years listed above. Yamaha made a big change to the MT 09 and related models starting in October 2020 when the engine displacement was changed from 847 cc to 890 cc.
How you can help me:
Subscribe (it’s free and makes UA-cam love me)
Click the thumbs up if you liked the video-it’s free.
Share a link to other potential motorcycle mechanics who might be interested
Show your appreciation (if this video helped you) by buying me 1 to 5 coffees at $5 ea
Pay securely with a credit card or google pay by clicking this link:
www.buymeacoffee.com/thanksro...
Happy Wrenching and Riding! Robert
Great video Robert! I've never seen a carbturn pro in action but it's fascinating! Stoked to see all the great videos you'll keep making!
Thanks! It's interesting to me that when I first looked at the tool it seemed similar to a thermometer where the red mercury line goes up with temperature, but it's actually vaccuum pulling the rods up from the top. They are stainless steel rods inside a plastic tube.
Good job Robert, seems you got it back together without extra pArts left over. Congratulations. As Always a well put together episode! 😎😎
Thanks Roger...I appreciate the positive feedback!
you are a great teacher
Thank you!
Γειά σου φίλε πως λέγεται το εργαλειο αυτό που έχεις
Good video. Could you feel a difference after adjusting it? I’m very new to the 09’s but after taking 2 short rides on my 2015 it wasn’t quite as smooth as I expected it to be and also felt sort of a delay in power in higher gears. Hopefully a sync will smooth it out. Thanks
The bike is running awesome now... The reason I did the throttle body sync was because I heard you should do that after adjusting the valves... My bike had about 25,500 miles when I made all the valve clearance adjust videos...
Overall the bike runs better than before I did all the work on it... Starts easier and purrs along perfectly...
Im at the point to do the tb sync im not sure which direction is what. Does Right lower the reading? And left increase reading? Or the other way around?
Whatever you do... do not turn the screw with the paint... Just turn a screw one way and see what happens... and if it's the wrong way turn it the other way.... It's not going to be much of a turn...
Remember to do valve clearance before setting vacuum balance
You're right... thanks for the comment... This video is actually number 41 out of 46 on my valve clearance check and adjust series playlist... See description in this video for link to complete series
hi , I own an mt 09 2019 , I moved the white screw and now the engine rpm in ralenti stay at a min of 2000, what can I do ? please help me. thank you.
Sorry to hear that....I don't know off the top of my head....can you turn it back to where it was?
Hello! Did you get your idle down or are ya idling 2k to this day?
🤜🤛
Great video thanks , I've noticed none of my screws have any white paint on them , would would you recommend and is there any other way of knowing what the main throttle body is
What is the make year and model of the bike you are working on?
@@meticulousmechanic 2020 Yamaha mt10 , I've checked the service manual and it's very similar to your mt09 , I got mine tuned so no 02 sensors anymore , I've noticed some people think you can turn the bypass screw but because mine is tuned I want to do it right , thanks for the reply
@@bccapone837I don't know... Did the service manual specify a certain cylinder that is the one you don't mess with? I noticed with my bike I accidentally tried to turn the one with the white paint because I was filming and not paying total attention.... It didn't even want to turn like it was locked tight... The other two screws turned easily.... as the last case emergency scenario.... You might be able to find the one that doesn't turn easy but you would have to be careful and watch where the slot exactly was so you can get it back there if it turns....? I would do some more research before I tried this though!
@@meticulousmechanic no the service manual is like yours it just said don't turn the white screw but didn't mention anything about what cylinder , I won't tackle it until I'm sure what one it is in case I make a mistake , i did read somewhere that its usually the one that the throttle cables and tps go to so on ours it would be the right side one if you were sat on the bike but not sure how accurate that is . So far Ive done the plugs , air filter oil change and oil filter , coolant change and new brake fluid front and rear so I'm looking forward to doing the sync and getting it all where it should be . much appreciate the feedback I'll let you know if I find out what one it was , all the best 👍🏼😎
@@bccapone837 maybe you could find out if Yamaha specifies a certain cylinder at the factory... Hopefully it's not willy-nilly (without direction or planning )depending on what the current factory technician feels like doing... Let me know what you find out I'm curious!
how'd you get in running without the gas tank on?
2:36 into video-the tank is connected-rotated and sitting on seat area-also check out my other video on preparing for throttle bocy sync- shows how to rotate and connect tank:
ua-cam.com/video/0y7c_UReXJY/v-deo.html
Tip Jar: www.buymeacoffee.com/thanksrobert