Fiat Bravo II. T-Jet /w Garrett GT1446 - Dyno (200+)

Поділитися
Вставка
  • Опубліковано 5 лис 2021
  • Fiat Bravo II. 120hp T-Jet with a GT1446 setup on the dyno.
    Garrett GT1446 turbocharger, 2.0Mjet intercooler, Giulietta 330cc injectors.
    ECU has been remapped, of course. I'm so god damn satisfied with this result, aaaaa! :D
  • Авто та транспорт

КОМЕНТАРІ • 72

  • @ads.alissonlara
    @ads.alissonlara 11 місяців тому +2

    First of all congratulations on Bravo, it's magnificent, and very brave indeed hehe
    Hello, I'm from Brazil, here we like to tune this 1.4 Tjet model in both punto and bravo or linea tjet.
    The most standard recipes for Stage 3 here are:
    Bosh Nozzles 65lbs
    downpipe
    Intake
    Turbo BorgWarner K14 or K16, k14 has full pressure at 3,300 rpm
    Stronger fuel pump
    Changing fuel to Ethanol (E100) It has a better rate than gasoline and it is safer for us to use it, in addition to having a higher whp gain than gasoline.
    We have several Tjet with
    260whp, 280whp, 296whp, and an incredible point forged with 390whp.

  • @alexialexiev3528
    @alexialexiev3528 2 роки тому +2

    Have you had any problems with the transmission and clutch? Does it hold up well with the extra power?

    •  2 роки тому +2

      clutch needs to be replaced, can't hold, m32 seems fine. but i have already replaced the bearings in it

  • @ingauno71
    @ingauno71 2 роки тому +2

    hello Krisztian is the extractor of the Giulietta ?? Were you able to mount it without difficulty? Thanks

    •  2 роки тому +1

      yes it's a Giu. it is difficult and expensive as heck. literally cut in half a bravo and a giu qv bumper then welded together then painted

    • @ingauno71
      @ingauno71 2 роки тому

      @ thanks

  • @bellicromanx
    @bellicromanx 2 роки тому +1

    213 HP, nice. 120 HP Camshafts?
    Also, how is the feel at high revs till the limiter? Does it feel strained after 5200 RPM as the power drops?

    •  2 роки тому +4

      it has stock camshafts yet. but i already bought the 150hp (bravo) and ready to be replaced. just needs a few tool. after that, i will rev it happily over 5k. now it feels like I'm going to a wall so..😅 not that great.

    • @bellicromanx
      @bellicromanx 2 роки тому +1

      @ Thank you. Waiting to hear your feedback once you install the 150hp cams (which I think are the same as Abarth cams) :)

    •  2 роки тому +1

      @@bellicromanx yeah probably they are closer to the 150 one👌

    •  Рік тому +2

      @@bellicromanx finished installing 150cam, power was like 210 but car feels much much different. revs happily to 6500. beautiful. but now i got TD04 so.. will check with that too

    • @bellicromanx
      @bellicromanx Рік тому +1

      @
      Thanks for getting back. Was wondering if you ended up doing it or not just recently ;) Great to hear that it revs much better. Enjoy your car with TD04!
      BTW, if you did the cam swap yourself, do you have any guide that you recommend for that job?

  • @panoskoniaris9918
    @panoskoniaris9918 2 місяці тому +1

    Any advice on Fiat Bravo 1.6 Diesel Mjet 120hp ?
    I hardly see people tuning it. I might ask silly questions since I am a beginner but you seem like a person who would have an explanation on my question.
    Thank you in advance

    •  2 місяці тому

      i also own a 1.6 mjet, and i gave up the tuning. it doesn't have the displacement to tune if efficiently. if You place a hybrid/bigger turbo on it You will lose the low end torque.

  • @belesiu8526
    @belesiu8526 9 місяців тому +1

    Hi, where did u get that black Fiat Emblem, that difusser looks So good

    •  9 місяців тому +1

      hi, thank you.
      both are custom made. The emblem: i've heated it so it has separated, then sanded then painted to black. The bumper: a giulietta qv and a bravo2 bumper welded together then painted black. :D

    • @belesiu8526
      @belesiu8526 9 місяців тому +1

      @ I see, thank you so much, I have a 1.9 mtj Fiat bravo 2 and I want to modify a lil bit on details ;d

  • @kakilai-diybypatricklai1711
    @kakilai-diybypatricklai1711 2 роки тому +1

    What diffuser did you put on your Bravo??

    •  2 роки тому +2

      this is a compete giulietta qv rear bumper welded to the bravo. literally cut both in half.🤣

  • @jonathanturnbull2617
    @jonathanturnbull2617 2 роки тому +1

    Why did you go with the tjet? Was it not better to go with the 165 2.0 sport diesel? Has 15bhp more and one remap without any type of mod can get 200 to 210

    •  2 роки тому +9

      answer is simple. i think diesel stinks, and has awful noise. i'm a petrolhead😅

    • @MrAndreCoutinho
      @MrAndreCoutinho Місяць тому +1

      @and also, the 1.4t can be modded quite easily to reach 250bhp or more.

    •  Місяць тому +1

      ​@@MrAndreCoutinho yeah i know that, in the last year i blew up an engine (by a mistake) and installed a td04-19T, running on 300ish hp right now, also using it on trackdays

  • @robertobarragandiaz914
    @robertobarragandiaz914 29 днів тому +1

    De que coche es ese difusor de el paragolpes trasero

  • @kakilai-diybypatricklai1711
    @kakilai-diybypatricklai1711 2 роки тому +1

    Is the GT1446 hybrid-ed or is a standard GT1446?

    •  2 роки тому

      standard 1446. i wish i could get a proper hybrid 1446...😁

  • @enricodambrosio239
    @enricodambrosio239 Рік тому +1

    Could you help please am looking for part numbers for map and intake sensors, make great project cars these tjet engines thanks.

    •  Рік тому +1

      U should get one from 595 essesse

  • @alfaromeo156j
    @alfaromeo156j 2 роки тому +1

    Helló.Programot ki írta? Tudtommal Manky csak dízelre ír. Abarth T-jetre keresek valakit,hasonló konfigra mint neked :D

    •  2 роки тому

      egy holland srac keszitette, erti a dogat, ahogy a videoban is lattad. Mankyekat csak megkertem hogy legyszi merjek le ;) mindenben tudok segiteni ;)

  • @nimbus6503
    @nimbus6503 Місяць тому +1

    May i ask you if i can know the diffusor and bumper front? like exact spec?

    •  Місяць тому +1

      we cut a bravo and a giulietta bumper in half and welded together

  • @mrgame9530
    @mrgame9530 11 місяців тому

    che preparazione hai apportato oltre alla turbina grazie

    •  2 місяці тому

      intercooler, injectors. thats all.

  • @srkiv
    @srkiv 2 роки тому

    Hello,I have mito tjet,I have garret 1446. Injectors are from which Giulieta?

    •  2 роки тому

      hi! all you have to check is: it has to be 170hp

    • @srkiv
      @srkiv 2 роки тому

      @ did you get 200hp only with another turbo? Or with turbo and injectors?

    •  2 роки тому

      @@srkiv turbo, exhaust manifold, injectors and intercooler

    • @srkiv
      @srkiv 2 роки тому

      @ which one is manifold?

    •  2 роки тому

      @@srkiv i have one from a stock abarth 1.4, not custom made.

  • @giorgossideras7733
    @giorgossideras7733 2 роки тому

    👍👍👍👍👍👍👍👍👍🙉🙉

    •  2 роки тому

      grazie :D

  • @filipevalcanaia1641
    @filipevalcanaia1641 Рік тому

    what wheel model?

    •  Рік тому +1

      this is a tomason tn1, 4x100, 8,5j. sorry for the late answer

  • @andreaprovazza6626
    @andreaprovazza6626 2 роки тому

    Estrattote della giulietta e'?

    •  2 роки тому

      that's right