I've done many searches to find the right answer, and here FlyingTech showed me how to in a few seconds. I wish other posters can learn from this, and forget about looking very clever, keep it short ans sweat, no fuzz. Thank you FlyingTech
If you are trying to add a second model and bind to a second receiver. Make a new model then press and hold cancel to get it to switch to the second model! Same goes for switching when flying, go to model select and hold cancel when you get to the model you want to actually switch to the model you want.
I have a question. I'm new to all this and looking for an answer please. Does the binding process eliminate the chance of two or more people flying on the same frequency? So once my airplane receiver has been binded to my transmitter theres no fear of a cross channel??
After doing the update, what receiver should I buy, so it will work as a 10 function TX/RX? Currently, before the mod, I have an FS-IA6 as the ONLY 6ch receiver I've been able to bind with.
How do you get the RX battery display to show on the screen. I can follow this procedure to bind and the led stops flashing which suggests binding is successful, but the rx display is missing and I still cant get the motor to spin. Is there another problem I've missed or has the binding failed in some way. Thanks.
the rx battery symbol is shown only when there is a battery connected with enough charge. if it doesnt have enough charge the the rx battery display wont show up and hence the motors arent moving. try using a fully charged battery. ps i know im three years late but i still hope this helped
sir i have a problem in my fs-i6, after i factory reset it the sensor list is gone, so my receiver cant detect my esc bec. how can i restore my sensor list? when i plug the bec the receiver cant detect and nothing appear in my fs-i6 monitor. btw my receiver is fs-ia6. thank you sir.
my receiver only flashes for like 4 times, rests, and then flashes 4 times again. i think that is why i cant bind my transmitter to my receiver. what can i do to fix it?
I am planning to bind another receiver to my i6. My goal is have my transmitter bind to two or more receivers and I do not want to rebind when switching between receivers. in other transmitter like taranis you create another model and do the binding with the new model profile. I can not get my head around how this works with i6.
The receiver failed with 7.4 volts of lipo. Does it work with 3.7 volts? There is no lipo between 4-6.5 volts. With 3.7 Lipo engines will run inefficiently. how have you solved this
Ok Wait ! i solve my problem : Sometime RX binding stay for very long so i disconnect the lipo, the binding cable and the power, then i connect all then the transmitter and the RX binding then RX binding Ok appear but for 0.5sec and the menu of the transmitter appear (without RX voltage) so i disconnect the Binding cable) turn all off . then turn on transmitter then receiver (without the binding cable) for me it works ! good luck
I've done many searches to find the right answer, and here FlyingTech showed me how to in a few seconds.
I wish other posters can learn from this, and forget about looking very clever, keep it short ans sweat, no fuzz.
Thank you FlyingTech
If you are trying to add a second model and bind to a second receiver. Make a new model then press and hold cancel to get it to switch to the second model! Same goes for switching when flying, go to model select and hold cancel when you get to the model you want to actually switch to the model you want.
Thank you Mike.
I see everybody says install OpenPilot, is this really necessary, will it make any difference to the handling?
+Abrie Duvenage I haven't used it. The radio works fine for flying my quads as is!
Thanks! Just what I needed. 😄
Thank you for this video!
I received the flysky transmitter, same as this video but should I have received a “bind plug” because I didn’t. Thx
Hello and thanks...one question...I have to do this procedure every time I use transmitter or only one time?
Just once...
I have a question. I'm new to all this and looking for an answer please. Does the binding process eliminate the chance of two or more people flying on the same frequency? So once my airplane receiver has been binded to my transmitter theres no fear of a cross channel??
What flysky gps module fits this model please?
After doing the update, what receiver should I buy, so it will work as a 10 function TX/RX? Currently, before the mod, I have an FS-IA6 as the ONLY 6ch receiver I've been able to bind with.
How do you get the RX battery display to show on the screen. I can follow this procedure to bind and the led stops flashing which suggests binding is successful, but the rx display is missing and I still cant get the motor to spin. Is there another problem I've missed or has the binding failed in some way. Thanks.
the rx battery symbol is shown only when there is a battery connected with enough charge. if it doesnt have enough charge the the rx battery display wont show up and hence the motors arent moving. try using a fully charged battery.
ps i know im three years late but i still hope this helped
Hi
I've done exactly like you but when I power on the transmitter the receiver isn't binded and it starts ringing.
Why ?
Can you help me pls
Thanks
Thanks!!!!!
sir i have a problem in my fs-i6, after i factory reset it the sensor list is gone, so my receiver cant detect my esc bec. how can i restore my sensor list? when i plug the bec the receiver cant detect and nothing appear in my fs-i6 monitor. btw my receiver is fs-ia6. thank you sir.
my receiver only flashes for like 4 times, rests, and then flashes 4 times again. i think that is why i cant bind my transmitter to my receiver. what can i do to fix it?
Qual radio devo comprar para usar com eachine qx95? Qual modelo do radio flyskay?
Лайк, спасибі БРО ❤️❤️😉
I am planning to bind another receiver to my i6. My goal is have my transmitter bind to two or more receivers and I do not want to rebind when switching between receivers. in other transmitter like taranis you create another model and do the binding with the new model profile. I can not get my head around how this works with i6.
Having the same problem. When I bind one rx, the other one becomes un-bound. Have you figured it out by now?
+Marek Pawlak you need to create another model and bind the new receiver while u r in the new model.
Thanks, Jack! It worked nicely.
3pins, top is red wire and mid ground?
How do I wire rx2a pro for ibus. On my flysky f3 evo
The receiver failed with 7.4 volts of lipo. Does it work with 3.7 volts? There is no lipo between 4-6.5 volts. With 3.7 Lipo engines will run inefficiently. how have you solved this
Nihat Dülger use a esc with bec or some other battery with the same plug
Other videos show throttle going to ch 3 not ch 1.....
Mine just says RX binding. tried on two receiver the ia6 and ia6b. it won't bind. help!
Do You resolve tour problem, i havé the same
I will be ordering a new transmitter. That may have been the problem. Im away from home for a while so I'll have to wait.
Ok Wait ! i solve my problem :
Sometime RX binding stay for very long
so i disconnect the lipo, the binding cable and the power, then i connect all
then the transmitter
and the RX binding then RX binding Ok appear but for 0.5sec and the menu of the transmitter appear (without RX voltage)
so i disconnect the Binding cable) turn all off .
then turn on transmitter then receiver (without the binding cable)
for me it works !
good luck
I tried it before. It never said rx binding ok. It just says rx binding no matter what I do.
ok , good luck
How to connect APM 2.6)) Cant find instruction
please help I am confused on what you powered the receiver with
A regular lipo and a esc
what Voltage battery do you use for this receiver ?
Its shows the needed voltage on the video...
It just says rxbinding not binding done
thanks m8
Cheers
Nice mine started smoking so ye
Blake FPV, maybe you switched the - and + on the receiver the ia6 doesn’t really have a safety diode but the ia6b does