How To Silicone BEHIND Bath Taps! Hints & Tips to get it right.

Поділитися
Вставка
  • Опубліковано 7 сер 2024
  • How to silicone behind bath taps!
    One of the most tricky things to do in a bathroom is to silicone behind bath taps.
    In this video I’ll show you some hints and tips that make my life easy when applying silicone to the bath area.
    Hope this video helps!
    Rob.
    #howto #silicone #bathtaps
  • Навчання та стиль

КОМЕНТАРІ • 42

  • @steves1460
    @steves1460 4 місяці тому

    Some very neat work there, one-handed! I’ve done a couple of bathrooms and got the same kit as you and use a similar technique. Never done behind taps before though, hence the reason I’m here.
    This video is probably one of the best I’ve seen and I will be saving it for future reference. Well done!

  • @dominicdurso3672
    @dominicdurso3672 2 роки тому

    Going to attempt mine this weekend glad I watched this . Thanks 👍

  • @YehoodToob
    @YehoodToob 2 роки тому +6

    My taps are quite close to the back tiles. The previous silicone has mould on it as it wasn't smoothed out... I was considering putting an adhesive strip over it. After watching this, I may just cut away the old silicone and reapply it myself, using a cut down profiler. I hadn't thought of that. Thank you.

  • @michaelbardot2017
    @michaelbardot2017 7 місяців тому

    Thank you! You’ve made this look easy!!!!

  • @lauharty
    @lauharty 2 роки тому

    Thank you so much for this, wish me luck this weekend haha !!

  • @jonnyhifi
    @jonnyhifi 2 роки тому +1

    great video : like another commenter, the idea of cutting down the profiler is one of those "flashes of the blindingly obvious" once told : which errrr... I hadn't worked out, so extremely helpful, ty, as now I can see how I can get in there ! thanks.

    • @lesterbathrooms3948
      @lesterbathrooms3948  2 роки тому

      Thanks Jonny, hope you get it sorted! Have a good weekend 🙏🏻

  • @chrissy212e
    @chrissy212e 4 місяці тому

    Nicely, done. i definitely need that little kit. Unfortunately, i don't have those fancy taps with my mixer taps. You can't go in between them like you did only behind which isn't easy.

  • @chrismordaunt2695
    @chrismordaunt2695 2 роки тому

    Great. Thanks for the tips

  • @lesterbathrooms3948
    @lesterbathrooms3948  2 роки тому +3

    Sorry guys, I think I’ve got this video farrrrr too long. Waffling on a bit, but didn’t want to miss anything. 👍🏻

  • @mohammadsaadkamal8556
    @mohammadsaadkamal8556 2 роки тому

    Great video, thank you

  • @moggyman6413
    @moggyman6413 Місяць тому

    Thank you, very helpful

  • @preciousbella1543
    @preciousbella1543 2 роки тому

    Perfect job

  • @neolamp1987
    @neolamp1987 2 роки тому

    Good tip, cutting the fugi profile down like that 👍

  • @zsoltszvetkov2720
    @zsoltszvetkov2720 8 місяців тому

    Is there a reason to use saliva? I mean sealant might doesnt stick to your finger then or so? Ive heard to use soapy water as silicon doesn’t stick to it. Im learning how to do this nicely so im really just try to find the best way, also if you could mention whats the best silicone for this work would be much appreciated. Thanks

  • @ballist1x407
    @ballist1x407 Рік тому +1

    Why would you use saliva when you habe a bath full of water to dip your finger in? I get it if your in a pinch and the water is disconnected but...

  • @MasterVSolo
    @MasterVSolo Рік тому +1

    Great video. How do you remove the seal in hard to reach places. Only that little space all the way

    • @nrako
      @nrako 11 місяців тому

      I’m using a Stanley blade with my hand and a plastic
      Knife with “sharp” edge, and the vacuum and after I’m going to try sealant remover and wash it off at the e end with pvc cleaner, I have les than 8mm behind the taps….hopefully comes out like the video

  • @ryk3899
    @ryk3899 9 місяців тому +1

    Good job. Never understood why fitters put the taps like that. How do you replace them, or get to them if there's leak?

    • @kezzokav5905
      @kezzokav5905 2 місяці тому

      You take them off from the top.

  • @nicehappysmiles8920
    @nicehappysmiles8920 2 роки тому

    Those hexagon style tiles are bling! Where are they from?

  • @maddannafizz
    @maddannafizz Рік тому +2

    Do you know, this is a free video, that he has been so kind to post and the moaning from some.. ..😮

  • @dasajman
    @dasajman Рік тому

    Dip ur finger in the water to smooth it out. When using saliva you transfer bacteria to the seal making it go mouldy

    • @lesterbathrooms3948
      @lesterbathrooms3948  Рік тому +3

      Hi, Personally I find that to be an old wives tale. Being doing this 23 years professionally, but also (something I can monitor) I have three bathrooms I’ve installed in my own property 8 years ago - no issues. I’d like to see the data on it rather than anecdotal if people can direct me to some I’d happily review it.

    • @dasajman
      @dasajman Рік тому

      @@lesterbathrooms3948 gonna attempt mine this weekend been putting it off for ages great video great advise.

    • @danhowarth-roffe2499
      @danhowarth-roffe2499 Рік тому

      Great tips there! In addition I taped my cut slither of profile attaching it to a 30 cm piece of dowling I had knocking about. Again, great video.. Stated as a handyman a year ago and now siliconing baths are pretty much my bread and butter.. oh and I’m getting used to the taste of silicone now! 😂

  • @mikewatt8706
    @mikewatt8706 2 роки тому +1

    That isn't close to being a small gap.

  • @steveday6860
    @steveday6860 Рік тому

    great video, but get a tripod😁

  • @iainrichardson4495
    @iainrichardson4495 Рік тому

    Buy something to strap your go pro to your head, instead of keep mentioning it..

  • @annleonard1508
    @annleonard1508 Рік тому +1

    Terrible camera work!