WeWrench Ep. 15 BMW E34 M5 S38B36 Engine Disassembly and Inspection Part 1 - Automotive Restoration

Поділитися
Вставка
  • Опубліковано 22 жов 2024

КОМЕНТАРІ • 18

  • @VBChannelExamples
    @VBChannelExamples 11 днів тому

    My favorite engine. Thanks for videos

  • @WHOTUCKIS
    @WHOTUCKIS 2 роки тому +2

    Working by yourself is blissful and difficult.
    A lot of good information here man. Good stuff!

    • @wewrench
      @wewrench  2 роки тому

      Thank you! Yes and both accounts!

  • @s.p.3350
    @s.p.3350 Рік тому +1

    Nice!

    • @wewrench
      @wewrench  Рік тому +1

      Thank you for your support!

  • @bgereon
    @bgereon 2 роки тому

    Great content, subbed and liked

    • @wewrench
      @wewrench  2 роки тому

      Thanks for the sub!

  • @bgtps4625
    @bgtps4625 2 роки тому +2

    Can you please confirm whether the coolant temperature sensor on the coolant manifold (the long tube) is for ECM (blue connector), while the sensor on the thermostat housing is for the coolant temp gauge on the dashboard?

    • @wewrench
      @wewrench  2 роки тому

      Working on this for you...

    • @bgtps4625
      @bgtps4625 2 роки тому

      @@wewrench thanks, actually I just found it out experimentally, my sensors were plugged the wrong way around which caused a false gauge reading (and wrong DME info). Blue connector (DME) goes to coolant manifold.

    • @wewrench
      @wewrench  2 роки тому +1

      @@bgtps4625 Got it! I wanted to be absolutely sure before I told you anything. Was going to dig through some wiring diagrams tonight

  • @JasonFromCT
    @JasonFromCT 2 роки тому +1

    No LS swap?

    • @wewrench
      @wewrench  2 роки тому

      Not this time! Lol

  • @abdellahbouincha3519
    @abdellahbouincha3519 Рік тому +2

    I don't think it will get to a 1 yon weight, maybe 700 kg or a bit more.

    • @wewrench
      @wewrench  Рік тому

      Light as possible hopefully

  • @kenxiong6830
    @kenxiong6830 Рік тому +1

    Typical of BMW to recommend a tool that is basically unobtainable. BMW used to have a tool referred by many as the Iron Maiden. It basically sat on top of the cylinder head and allowed you to put pressure on all of the rockers to free up the camshaft. Impossible to obtain today and only real way to get it is by making. Gosh I hate BMWs 😑

    • @wewrench
      @wewrench  Рік тому

      You can get them out without that

    • @kenxiong6830
      @kenxiong6830 Рік тому

      @@wewrench definitely a possibility with some cursing 😂