For all those commenting about precision, these parts are made for very rough use and only the connecting parts which are, inlet and outlet need to be precise, which the workers corrected on lathe. The rest of parts which only need to interact with air flow/water flow can do very well with little precision. I would say it is very efficient use of resources.
Who the hell is commenting about precision? Dude's digging the casting out of the ground, not wearing any shoes, and they're pouring it from a pile of junk scrap they picked the parts out of in the back. I just want to know where I can buy one of these cars that's been refurbished with a dirt-cast turbo, alternator that's been re-wound with bits of cardboard and string in it, and a battery that's been poured in place...
Very Efficient use of resources? Not! This Is a Tragedy. The working conditions of these HUMAN BEINGS are unacceptable by any international standard: No gloves; no work boots; non-flame retardant clothing; without glasses and nor protective mask 3M-9105; no helmet; without filter to avoid the aspiration of gases, dust, metals in suspension, burning fumes... All these workers will not make it to 40. Only the owner. Jeeezzz!!!
me imagino que esa es la pobreza de los paises comunistas. ese señor por sus condiciones debe vivir en un pais comunista. porq en el capitalismo no existe esas cpndiciones laborales
Молодцы, настоящие труженики, добытчики денег, всего добиваются своим трудом. На коленках такое делать, уму не постижимо, как в каменном веке и главное, всё получается. Молодцы.
@@ti_rus мне тоже страшно. Раньше смотрел с улыбкой на таких мастеров, зная что все что угодно смогу купить. Теперь рубль чуть ценнее туалетной бумаги, и такой уверенности вообще нет
@@viktorlob1960То была ирония, черный юмор. Мне то как раз наоборот. Я почти все виды работ могу делать - 2 года УТП (учебно трудовая практика - механомастерские/ сврочные/ литейные/ штамповочные и др.) в советской Бауманке... Плюс последние 4 года - уехал из Москвы в деревню, где из "говна и палки" восстановил столетний дом. Теперь руки и голова кормят. Мне было страшно, когда мой флаг и знамя победы моих дедов над кремлём заменили на власовский триколор и вместо гвардейской ленты сделали полосатую георгиевскую. Теперь будет страшно вам... Вы же действительно привыкли только потреблять... и практически не способны к созидательному труду - я это наблюдал даже на заводах. Вашему поколению просто не повезло. Вам пора задуматься, а не бояться. Хотя и эту способность у вас отобрали обрЕзованием эрефии.
Как раз в тапках и надо если нет спецобуви с защитой от попадания металла внутрь. В тапках есть возможность быстро от обуви избавиться. Выпрыгнуть из тапок.
Trust me, it only looks cool from the comfort of your computer. I retired from an office job and went to work in a factory welding up steel tanks. And being the Midwest, it was either super hot or super cold. And no one told me I would be covering 15-20,000 steps a day. My poor body…
Skilled guys, mould halves look to be lined up good in the final casting, note the use of safety sandals and not a single pair of glasses in use. The heat in summer must be brutal.
I am a mechanical engineer, working in a Japanese pump company in China. I'm impressed how these workers are doing the casting of the casing without modern equipments, unaware of the fact that there is so much mathematics and calculation behind this casing design. Moreover, I have visited modern foundries in China and I can imagine why many of the developing countries, that didn't moderanize their manufacturing industry, couldn't compete with China, and lost its manufacturing to China. Is it in Pakistan?
From mexican fisherman “Millions - then what?” The American said, “Then you would retire. Move to a small coastal fishing village where you would sleep late, fish a little, play with your kids, take siestas with your wife, stroll to the village in the evenings where you could sip wine and play your guitar with your amigos.” 👍
That custom welded shelf-like adapter thats in the lathe chuck at 7 min30sec to accept the pump for turning. Wow. Wonder how long the bearings in that headstock last.
Сделан из сплавов алюминия. Смотря какое назначение детали. Да и это со стороны может казаться, что лижбы из чего. Может они подбирают отходы из определенных марок сплавов?
Не совсем из какого попало. Все что кидалось вначале это сплавы железа (чугун, сталь). В качестве топлива кокс, так что на выходе получается обычный чугун (за счет кокса сплав науглеродится как нужно). Что в конце добавили я не понял, возможно алюминий, в необходимом количестве (это повысит износостойкость и упростит токарную обработку). Или добавили какой-то шлакообразующий материал, но это уже нюансы...
это из разряда что нужно иметь при себе американскому морпеху чтобы получить страховку в случае чего)---думаю ребятам с видио о страховке думать не приходиться...
более того сам видел на заводе Роснефти бзики и маразм когда заставляют рабочих идти в 40 градусов жары по тротуару в полном обмундировании почти как пожарник ---типо рядом трубы с газом вдруг чуть чего ходите в перчатках касках и очках---при том что на встречу по тротуару прекрасно идут девушки в платьях и туфельках открытых из отдела кадров---уж не думаю что там ребята без опыта или дурные что не оденут сапоги на всякий случай---это их выбор и возможно лучше как они чем в наших маразматических реалиях роснефти следующей за стандартами запада---обосрались по полной с закупкой оборудования западного и ныне небось пытаються также копировать детали для западного оборудования)))
man, i can't imagine how fulfilling this man's life is. i bet he sleeps like a baby at night and wakes up energized unlike most. he enjoys his life and enjoys staying busy without the assistance of drugs or alcohol. one day i will get to his level.
Может ты и перейдешь, если неудачник по жизни, а за всю страну причитать не надо - не твой уровень. Ты есть никто, в этом ты собственноручно расписался своим нытьем сопливым!
Por eso todo lo que compras de Asia y África se rompe al poco tiempo. Calidad Cero, ingeniería cero. Lo único rescatable de estos vídeos es ver la capacidad de trabajo de esta gente 👏.
그옛날 군 제대하고 경기도 김포 고촌에서 주물공장! 한여름 구슬땀 흘려가며 노동했던 추억이 떠오른다 1300도 넘는 가마의 쇳물은 그 자체가 위협적이다 온종일 쇳물 붓고,털고,삽질하고.... 하루가 중노동이었다 다듬어진 제품을 트럭에 싣고 인천 남동공단에 납품! 일과를 마치고 구워먹는 삼겹살,쇠주맛은 지금도 잊히지 않는다.
These guys are the definition of "working with what you got"
For all those commenting about precision, these parts are made for very rough use and only the connecting parts which are, inlet and outlet need to be precise, which the workers corrected on lathe. The rest of parts which only need to interact with air flow/water flow can do very well with little precision. I would say it is very efficient use of resources.
Who the hell is commenting about precision? Dude's digging the casting out of the ground, not wearing any shoes, and they're pouring it from a pile of junk scrap they picked the parts out of in the back.
I just want to know where I can buy one of these cars that's been refurbished with a dirt-cast turbo, alternator that's been re-wound with bits of cardboard and string in it, and a battery that's been poured in place...
Very Efficient use of resources? Not! This Is a Tragedy. The working conditions of these HUMAN BEINGS are unacceptable by any international standard: No gloves; no work boots; non-flame retardant clothing; without glasses and nor protective mask 3M-9105; no helmet; without filter to avoid the aspiration of gases, dust, metals in suspension, burning fumes... All these workers will not make it to 40. Only the owner. Jeeezzz!!!
On second thought I agree.
You should make super chargers.
me imagino que esa es la pobreza de los paises comunistas. ese señor por sus condiciones debe vivir en un pais comunista. porq en el capitalismo no existe esas cpndiciones laborales
Я восхищаюсь этими людьми!!!
Спасибо за вашу оценку. Оставайтесь с нами, чтобы узнать больше.
Я бы даже сказала очумелые ручки!!!!!
@@Evidz это какая страна?
@@kegerkegerow99 Я думаю, Индия
@@kegerkegerow99 Пакистан
Молодцы, настоящие труженики, добытчики денег, всего добиваются своим трудом. На коленках такое делать, уму не постижимо, как в каменном веке и главное, всё получается. Молодцы.
это и есть каменный век
Нам это предстоит...
@@viktorlob1960 кому то страшно, это же не по клавишам стучать и языком трепать...
@@ti_rus мне тоже страшно. Раньше смотрел с улыбкой на таких мастеров, зная что все что угодно смогу купить. Теперь рубль чуть ценнее туалетной бумаги, и такой уверенности вообще нет
@@viktorlob1960То была ирония, черный юмор. Мне то как раз наоборот. Я почти все виды работ могу делать - 2 года УТП (учебно трудовая практика - механомастерские/ сврочные/ литейные/ штамповочные и др.) в советской Бауманке... Плюс последние 4 года - уехал из Москвы в деревню, где из "говна и палки" восстановил столетний дом. Теперь руки и голова кормят. Мне было страшно, когда мой флаг и знамя победы моих дедов над кремлём заменили на власовский триколор и вместо гвардейской ленты сделали полосатую георгиевскую. Теперь будет страшно вам... Вы же действительно привыкли только потреблять... и практически не способны к созидательному труду - я это наблюдал даже на заводах. Вашему поколению просто не повезло. Вам пора задуматься, а не бояться. Хотя и эту способность у вас отобрали обрЕзованием эрефии.
If I bent over like this guy I would be in traction for a month.
Water pump body! Great job!
The best!
wow he molds half of it directly into the ground. It does make a lot of sense to create a sand pit
このチャンネル大好き。 こういう労働こそ人生に真の充実感を与えてくれる。
В тапках расплавленный металл разливать, да у них походу яйца из чугуна отлиты.
@KG BuM 🇰🇬 И русским фашистам дали по зубам.
Просто они рождаются быстрее, чем расходуются.
Как раз в тапках и надо если нет спецобуви с защитой от попадания металла внутрь. В тапках есть возможность быстро от обуви избавиться. Выпрыгнуть из тапок.
@KG BuM 🇰🇬 "их выиграть" очередная жертва ЕГЭ. И это индус.
@kgbum8118the Sovets didn’t really have any success there either....
É maravilhoso ver esses jovens trabalhadores se doando na arte de criar e recriar essas obras...
jovenes? jajajjaja
Just gotta love how hard a days work is......no matter where you are!
These gentlemen make the coming Mad Max hell-scape seem sort of cool.
"What's the tolerance on this dimension?"
This guy: "Yes"
Я восхищён мастерством этих людей.
Holly old man... Full respect !
80 years old, I dont know how he hasnt chopped or burned his feet off working with no shoes on. God bless him.
this is OSHA's worst nightmare. Then again, all the coolest shit is so...
Do you have any idea what they're making? Is that some sort of car part?
@@AK-47ISTHEWAY I read from another comment that it's part of a water pump
Looks like a blower fan housing. Kinda thing for water pump.
Trust me, it only looks cool from the comfort of your computer.
I retired from an office job and went to work in a factory welding up steel tanks. And being the Midwest, it was either super hot or super cold. And no one told me I would be covering 15-20,000 steps a day.
My poor body…
I'd be worried working with molten metal with nothing but a beard, a kaftan and sandals to protect me.
That's third world standard, anything less than that is mad Max mayhem...
Поэтому они и производят дешевле. А когда государственное регулирование всего, то это дорого.
These men are hard workers, I wouldn't last 5 minutes doing that kind of labor.
Skilled guys, mould halves look to be lined up good in the final casting, note the use of safety sandals and not a single pair of glasses in use. The heat in summer must be brutal.
When u only need 75% precision…
I am a mechanical engineer, working in a Japanese pump company in China. I'm impressed how these workers are doing the casting of the casing without modern equipments, unaware of the fact that there is so much mathematics and calculation behind this casing design. Moreover, I have visited modern foundries in China and I can imagine why many of the developing countries, that didn't moderanize their manufacturing industry, couldn't compete with China, and lost its manufacturing to China.
Is it in Pakistan?
No it's United States.
@@MuhammadUsman-qk8kk LOL!
Pretty sure it's India bro.
It surely is Pakistan. I can say that looking at the motorcycles.
From mexican fisherman “Millions - then what?”
The American said, “Then you would retire. Move to a small coastal fishing village where you would sleep late, fish a little, play with your kids, take siestas with your wife, stroll to the village in the evenings where you could sip wine and play your guitar with your amigos.”
👍
As a kid growing up in New York we did sand casting pouring aluminum and lathe work in metal shop.
The way they melt the metal just blows my effing mind.
There's still a foundry similar to that in the Welsh valleys 👍🇬🇧
That custom welded shelf-like adapter thats in the lathe chuck at 7 min30sec to accept the pump for turning. Wow. Wonder how long the bearings in that headstock last.
Single use items lmfao
Good job!!
They get the fun jobs, here i have to deal with coworkers who stare at their damn smartphones all day instead of work.
Bela peça, parabéns.
Awesome cool 🆒️ 😎 👍
блин залипательно! молодцы индусы!
Unbelievable…casting with a sarong. The men got skills.
Awesome quality 👏 I love it thanks for sharing
Thanks for watching.
Muito bom, homens de muita habilidade,,, Brasil...
Пакистан молодцы.
Those men are truly masters of the craft…
Thanks for appreciation.
Круто! Просто приятно смотреть как работают люди. 👍
Россияне учитесь производить что-либо без западного оборудования
@@azzzzzamat Мы умеем.
@@azzzzzamat лол, как раз металлургия в РФ итак сильная.
Что за страна? Пакистан?
@@slavikpisik Я думаю Индия.
Amazing. What a prefect performance. Supr.........
Ayos dyan good job 👍👍👍
Ты же просто воруешь видео, и пишешь название. Даже не зная что за деталь он отливает
Nice video.
Так вот как мою турбину создавали!
Excelente! 👍
Parabéns pelo esforço e o trabalho.
No brasil tudo é proibido desde o forno pelo meio ambiente como pelo resto que não está nas NRs....
А качество этого изделия он ведь сделан из какого попало металла
Раз производят значит есть спрос, значит и качество хорошее.
@@user-tm3hh8mf5c масса людей покупает дешевое барахло , это не значит что оно хорошее качеством
Сделан из сплавов алюминия. Смотря какое назначение детали. Да и это со стороны может казаться, что лижбы из чего. Может они подбирают отходы из определенных марок сплавов?
@@ecf82 какой алюминий, лом железа и чугуна закидывают.
Не совсем из какого попало. Все что кидалось вначале это сплавы железа (чугун, сталь). В качестве топлива кокс, так что на выходе получается обычный чугун (за счет кокса сплав науглеродится как нужно).
Что в конце добавили я не понял, возможно алюминий, в необходимом количестве (это повысит износостойкость и упростит токарную обработку).
Или добавили какой-то шлакообразующий материал, но это уже нюансы...
Pumps made for the Boeing 737 under the most strictest specifications and tolerances keeping the sky’s safe…
done is better than perfect - their customers will be satisfied!
Do they also cast the blackbox ? Just curious.
Сталевары в шлёпанцах жесть
это из разряда что нужно иметь при себе американскому морпеху чтобы получить страховку в случае чего)---думаю ребятам с видио о страховке думать не приходиться...
более того сам видел на заводе Роснефти бзики и маразм когда заставляют рабочих идти в 40 градусов жары по тротуару в полном обмундировании почти как пожарник ---типо рядом трубы с газом вдруг чуть чего ходите в перчатках касках и очках---при том что на встречу по тротуару прекрасно идут девушки в платьях и туфельках открытых из отдела кадров---уж не думаю что там ребята без опыта или дурные что не оденут сапоги на всякий случай---это их выбор и возможно лучше как они чем в наших маразматических реалиях роснефти следующей за стандартами запада---обосрались по полной с закупкой оборудования западного и ныне небось пытаються также копировать детали для западного оборудования)))
Hipnotizante trabalho em metal.
Fala Br . 🤣🤣🤣🤣
Os melhores do mundo...
Outstanding.. dangerous.. very dangerous.. but outstanding.
At 0:50 he does his rain dance..
Awesome!
Glad you think so!
now that's impressive
Nice part. Would like to hang on the wall in my workshop.
Never forget about safety. Use Softgle Comfort
Так вот как делают детали для АвтоВАЗ
Теперь понятно почему все так грустно
Я примерно такие детали обрабатывал на карусельном станке.
el hombre y su capacidad de salir adelante y crear
Sehr gute handwerkliche Arbeit 👍 Aber an euerer PSA muesst ihr noch arbeiten, da muesst ihr noch besser werden. 👍👍👍
Muito bonito o trabalho 👏👏👏👏
incredible.
man,
i can't imagine how fulfilling this man's life is. i bet he sleeps like a baby at night and wakes up energized unlike most. he enjoys his life and enjoys staying busy without the assistance of drugs or alcohol.
one day i will get to his level.
i bet he's been working since he could walk too
The secret of such maraviglia must be flip flops
Quá chuyên nghiệp 👍👍👍👍👍👍
Хороший контрабас!))
С пузырями! Да пох! 😂
Красавчик 👍
Даа если бы не увидел смартфон то подумал бы что люди работали так где-то в 60-е годы.
Там полно автомобилей аж 50-х годов, старше нашей 21-й Волги... моторикши.. велорикши.. рикши на своих двоих 😊
Nice work. Greetings from Brazil
Thank you very much!
What kind of that white rocks that they add after iron?
السلام عليكم ورحمةالله وبركاته
تمنياتي لكم بالتوفيق ان شاء الله 🙋♂️👏👍
Ông làm khuôn đúc rất tốt thật tuyệt vời
Çok güzel. Hayranlık duruyorum.
Залипательно!
Lump of coal in the ladel for added carbon... Nice touch
Excellent
Thanks
Професионалы!!!
Excellent work 🇵🇹🇧🇷
Thank you so much 😀
Thank you.
You're welcome!
Please let me know the problem with my welding image.
Вот они творят чудеса,скоро и Россия перейдет на современные дворовые технологии
Может ты и перейдешь, если неудачник по жизни, а за всю страну причитать не надо - не твой уровень. Ты есть никто, в этом ты собственноручно расписался своим нытьем сопливым!
Quá đẹp quá chuẩn 👍
Ottimo.
ИП." Как получится"
Марка стали? Не, не слышали!
@@alexboland8537 чугуний а может лялюминий кто знает.
Por eso todo lo que compras de Asia y África se rompe al poco tiempo. Calidad Cero, ingeniería cero. Lo único rescatable de estos vídeos es ver la capacidad de trabajo de esta gente 👏.
Я так понял это центробежный насос для жидкости
это турбины для JDM ))
Улитка, для насоса.
These guys need some Redwings Boots !!!
адский труд за копейки. просто ужас... депутатов туда надо что бы поняли что такое труд
OSHA “we’ve done it…we’ve found the great valley”
Ооо, новый заказ получили после первого видео
На таком производстве только и работать в сандалях
Молодцы
Người nước ngoài làm nghề giỏi quá
And there cars is within 1% of what you order, very tight quality control. Made in Calgary N.E.
Технология называется "литье в песчаные формы"
Безумный Макс. Турбовозрождение
Muito foda !!!! 😳
Genio daikin
У них сталь на ровне с углем топливом служит,горит аж светится)
그옛날
군 제대하고 경기도 김포 고촌에서
주물공장!
한여름 구슬땀 흘려가며 노동했던 추억이 떠오른다
1300도 넘는 가마의 쇳물은 그 자체가 위협적이다
온종일 쇳물 붓고,털고,삽질하고....
하루가 중노동이었다
다듬어진 제품을 트럭에 싣고 인천 남동공단에 납품!
일과를 마치고 구워먹는 삼겹살,쇠주맛은 지금도 잊히지 않는다.
No shoes, 300$ phones.