How to Bind the Tinyhawk Freestyle II (2)
Вставка
- Опубліковано 18 вер 2024
- Support DATfpv for all his hard work:
www.buymeacoff...
www.paypal.com...
paypal.me/datfpv
instagram: / datfpv
facebook: / datfpv
twitter: / datfpv
Join my Channel: / @datfpv
How to Bind the Tinyhawk Freestyle II (2) and any Emax Hawk, this video will show you how to bind your tinyhawk with the jumper T-Lite radio, also how to bind via betaflight if you are having issues.
We will be using Betaflight CLI commands: bind_rx
emax Tinyhawk Freestyle II (2) Features
Durable aerospace grade 3k woven carbon fiber
BlHeli_S ESC
F4 (MATEKF411RX Firmware) Flight Controller
RunCam Nano 2 FPV camera
More powerful VTX with 25/100/200mw power levels
Smart Audio connected
FRSKY D8 compatible
Efficient Emax 1103 7000Kv brushless motors
Avan Rush 2.5″ props
buy emax tinyhawk freestyle 2 (affiliate link):
www.banggood.c...
buy the jumper t-lite:
www.banggood.c...
Jumper T-Lite 16CH Hall Sensor Gimbals CC2500/JP4IN1 Multi-protocol RF System OpenTX Mode2 Transmitter Support Jumper 915 R900/CRSF Nano for RC Drone - Mode 2 (Left Hand Throttle) CC2500
Other videos:
Change protocol:
• BetaFPV LiteRadio 2 us...
Tinyhawk betaflight:
• Emax Tinyhawk Freestyl...
Fix the Controller / receiver tab:
• Radio Sticks Don’t Mat...
TBS Tango 2
Team BlackSheep has redefined the portable remote control with the TBS Tango 2. Now we're back with one of the most popular requests: a compact full-size remote! The TBS Mambo follows in the footsteps, but focuses on all of the things the Tango 2 tries not to have: a larger screen, traditional form factor with switches and potentiometers, JR module bay, replaceable batteries and trim buttons!
TBS Tracer
The TBS Tracer (XF) system is a R/C link system made for FPV enthusiasts. It features unheard of latency and performance without any of the clutter of choosing RF modes, link profiles. It just works. Two-way communications includes telemetry functionality and support for 3rd party autopilots.
DJI FPV Goggles
The DJI FPV Goggles V2 with DJI O3 image transmission features high definition, low latency, long-distance transmission, and strong anti-interference capabilities. The DJI FPV Goggles Battery in the box supports up to 110 minutes of flight when fully charged. High definition, low latency, long-distance transmission, and strong anti-interference. Battery in the box supports 110 minutes of flight when fully charged.
FPV
FPV, has revolutionized the radio control hobby. By definition, it is a method used to control an unmanned aerial vehicle (UAV) or radio-controlled vehicle from the driver or pilot's perspective. ... A live FPV system makes precise aerial photography and videography possible.#TBS #TBSmambo #TBStango2 #fpv #derbyfpv #impulseRC
Betaflight
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support.
Flight Controller (FC)
A flight controller (FC) is a small circuit board of varying complexity. Its function is to direct the RPM of each motor in response to input. A command from the pilot for the multi-rotor to move forward is fed into the flight controller, which determines how to manipulate the motors accordingly.
Radio Transmitter
The common frequencies used in FPV drones are 2.4GHz and 900Mhz. 2.4GHz is the standard nowadays for radio control thanks to its frequency hopping technology, which manages channel automatically to avoid interference between pilots. 900MHz is another popular frequency mostly used in long range flying.
ImpulseRC Apex 5″ Quadcopter Frame
Through a process of continous refinement and always striving to improve we have created a new breed of freestyle frame. The Apex does not compromise in stiffness or durability, so you never have to choose between confidence and performance. Unique design elements new to the FPV world make your build and maintenance more simple than ever before. Toughness of the frame itself is increased while also offering much better protection for your investment in flight electronics.
I can never remember if this is the hold and power up or press to bind type. Cheers for the video man will help whenever I need to rebind.
Good job friend, I'll even share it with some friends who have the same radio 👌🤗👍
thanks man!
Thx for the vid keep the good work
Thanks, will do! remember to sub!
Good tutorial, but one very important thing to note, with multiprotocol transmitters always fine tune rf the frequency for FrSky after binding. If not, you are very prone to getting very random failsafes, which I learned so the hard way :(
Thanks for the video! unforunately something wrong with mine. I don't have a blue light at all on my board. cant seem to get it into binding mode with the button. Using cli says "unsupported when I type the command.
Ended up using a separate receiver.
I’m curious, how would you make the remote change between modes for the drone, like how would you make it go from casual flying to doing flips and tricks with only one switch.
if you have beta flight
then go in there and go to modes and then scroll down until you see Arco trainer if you don't see it make sure at the top of modes tab
unused modes are off.
assign that to a switch and there you go.
Is there a complete step by step method of how to setup the T-Lite and bind the Freestyle 2 drone?
You mentioned copy / paste, what do i copy paste?
copy the model 1 and make a clone then modify the clone for your drone
Jumper T-Lite CC2500 Just want to make sure I'm getting the right one before I buy it for my tinyhawk freestyle II im not to sure on witch one to buy or do need the Jumper T-Lite JP4-in-1
hey - its the JP4IN1 - this is the multi-protocol version
@@Datfpv tytyty much
My drone color does not stay blue?
So Cc2500 will be okey too cuz tinyhawk 2 freestyle is frsky d8, right?
yes they are d8 frsky
So I just buy the remote and just bind?
yep - you'll need a battery for the controller, the quad should come with 2 - but if you want to fly fpv, you will need a pair of goggles.
Hi can you use tbs mambo on thf2?
only if you add the tracer receiver in it, or you have a module for the frsky receiver that the TH comes with... if none of the above - NO
Hello! I have followed both videos of binding jumper t lite with my eachine novice II, and making everything exactly the same, drone never arms! Just make some beeping... what can I do?? : , (
do you know what receiver is in the eachine ? make sure you are using the correct protocol
Hello mate! I was wondering if you are using the cc2500 or jp4in1. Can you please explain me the difference? I want to bind the radio to a tyro 79s with Frsky xm+ receiver, which should I choose? 🤔
hey - the jp4in1 is the multi-proticol version, meaning it will bind with a wide range of recievers, the other cc2500 is not a multi-protocol and will only bind with certain recievers.the tyro is not what you are binding the controller to - its the reciever inside it... frsky, flsky, spectrum etc... I'd buy the jp4in1
@@Datfpv Thank you soooo much mate! Do you have any coupon to support you? 😊
@@georgegourzoulidis210 I only have my pateron at the moment if people want to support me: www.patreon.com/datfpv
Do you need to put in an external receiver to pair them?
the quad needs a receiver in it yes.
Where can I get a battery mat for the tiny hawk freestyle 2 like the one you have?
hey - it was just something like this that I cut / trimmed:
www.hobbyrc.co.uk/ummagrip-battery-pad-tbs-edition?gclid=Cj0KCQjw1PSDBhDbARIsAPeTqreJ8fIa5VfTq8JutBKm-kjTMNikCLY4ZljBdEl0T7YkbPNXJU84A3caAj3PEALw_wcB
does this drones camera/VTX have a built in mic?
no mate don't believe it does.
does the jumper t lite work with emax race
yes it should be fine, if you get this one it has multiple protocol so will be good whatever receiver is in the emax race you get - normally frsky compatible
Is this the same process for the tinyhawk 2 rtf?
yes.. the only diff would depend on the controller.
can this bind to the x9d+ with D8 mode enabled?
this will bind with D8 mode quads (frsky) - it is compatible with lots of different receivers as well.
sorry - think you meant the quad... the quad uses D8 mode so yes won't be a problem - frsky.
But bro how I bound for my googles?
Where is The "set up switches" video?
this one mate : ua-cam.com/video/MPqL-nPAvSA/v-deo.html
@@Datfpv Thank you for realy fast respond!
That didn't work. >:/