How to access hidden menu Ford Focus MK1 (instrument cluster test mode, service menu)

Поділитися
Вставка
  • Опубліковано 14 лис 2014
  • Ford Focus MK1 hidden menu (test mode) gives you access to sensors readouts, tests and DTCs (diagnostic trouble codes). You can easily access data from sensors like coolant and oil temperature, speed in mph and km/h, engine RPMs. Also perform test gauges (needle sweep) and indicator bulbs/LEDs.
    More at mr-fix.info/ford-focus-mk1-hid...
    Music by Dan-O at DanoSongs.com
  • Авто та транспорт

КОМЕНТАРІ • 92

  • @federicomuller5348
    @federicomuller5348 3 роки тому +26

    It would be nicer if you explained each one, isn't it?

  • @jere.nurkka
    @jere.nurkka 7 років тому +46

    0:14 that is what I would call acceleration!!

    • @OlivierEdits
      @OlivierEdits 6 місяців тому

      Mk1 focus is a spaceship for reals

  • @federicomuller5348
    @federicomuller5348 2 роки тому +23

    Excellent explanation of every single sub menu, thank you very much, because without the explanation, just knowing the hidden menu, it would just be nonsense worthless, isn't it?

    • @mrfixpl
      @mrfixpl  2 роки тому +5

      You checked the link in the description before posting this comment, right?

    • @kevinagnew6878
      @kevinagnew6878 Рік тому +1

      What is the transmission reset for the zx4 2.0 automatic transmission

    • @systemx6418
      @systemx6418 Рік тому +1

      @@mrfixpl i dont find any link?? Allso would like to know what those means..Does it show error codes???

    • @curiosity2314
      @curiosity2314 11 місяців тому

      @@systemx6418 I think the link is an associated video.

  • @Masteru71
    @Masteru71 6 років тому +7

    I've done the test and now i can't start the engine..focus 2002 1.8 tdci 115hp help!

  • @bluesvmta
    @bluesvmta 2 роки тому

    Dear Mr. Fix, how do I activate the needle sweep (MK1 ST170). Can't see it in your "Mr Fix Info". Thanks.

  • @nickgandy3
    @nickgandy3 7 років тому

    i have an issue with my airbag light flashes up code 44 rh crash sensor malfunction. does anyone know where its located so i can replace the sensor?

  • @MartinBelobrad
    @MartinBelobrad Рік тому

    thank you so much. I didn't know and help with calibration.

  • @dfcvda
    @dfcvda 6 років тому +1

    what are the mk1 auto
    boxes like on these? I have been offered one cheap so I`d like to know if they are fit for purpose?

    • @KPCTEB
      @KPCTEB 2 роки тому

      Perfect

  • @CaliforniaCarpenter7
    @CaliforniaCarpenter7 4 місяці тому

    Thanks for the video. I had the same error code, and this isn't the first time. My check engine light comes on in the rainy season and the E001 (passenger side wiring harness) comes up. Thanks for reminding me how to check.

  • @tomdoe544
    @tomdoe544 5 років тому

    Hey My Dash Instruments Died Then Half Hour Later Engine Starts Jerking every 2-3 seconds when accelerating and even tho dash instruments not working the temp gauge on dash somehow still went above red and now stuck there days later, Any Ideas Garage Said Possibly Injectors Or Diesel Pump But Cant Understand How The Complete Dash Failure Beforehand Relates To The Engine Jerking Hour Later Any Advice Greatly Appreciated

  • @rxchxrdsxn1224
    @rxchxrdsxn1224 9 років тому +1

    amazing

  • @tonilord4555
    @tonilord4555 6 років тому

    My 53 plate ford connect will not start and they is a loud clicking nose from my fuse box in side my van wot could it be as it not start at all need help please

  • @MrErichuizer
    @MrErichuizer 2 роки тому

    I have a Ford Ka mk 1.6 from 2003, will this work on my car as well?

  • @mentorbb8186
    @mentorbb8186 6 років тому

    I does it and yet my car dont work . Whats the problem.

  • @pepipepi8800
    @pepipepi8800 6 років тому +1

    working....tnx

  • @ludovitklein2337
    @ludovitklein2337 6 років тому +3

    Hey man, perfect video, had no clue about this 👍 but i have a question. When I do this and i let it to show my RPM and then put the key to possition 0, after putting the key to possition 2 it shows trip odometer again. How to let the RPM shown still?

    • @mrfixpl
      @mrfixpl  6 років тому +2

      You need to start the engine with the trip reset button pressed.
      Each time you turn the ignition off you exit this hidden menu.

  • @alexwoolum
    @alexwoolum 7 років тому +1

    I have had test pop up every time I start the car. Trip milage doesnt work. Any ideas on that?

    • @mrfixpl
      @mrfixpl  7 років тому +1

      stuck reset button or low battery (instrument cluster resets on voltage drop).

  • @CactusJack252
    @CactusJack252 7 років тому +2

    How did you get the rpm's to show up? My car doesn't have a tach and I don't want to install one.

    • @mrfixpl
      @mrfixpl  7 років тому

      Turn on the engine with reset button pressed. then toggle through the hidden menu.

    • @CactusJack252
      @CactusJack252 7 років тому +1

      Thanks. I will give it a try

  • @scorpionwins6378
    @scorpionwins6378 6 років тому

    What year and trim level is this Focus? Am currently looking into buying a 2005 zx3 and it doesn't have a tachometer.

  • @imalexandros3150
    @imalexandros3150 2 роки тому +2

    (Ford Focus Mk1 1.6 16v)
    How many liters are left in the tank after the fuel light is on?

  • @mrpiro4266
    @mrpiro4266 7 років тому

    i have an idle problem with ford focus mk1 56 plate, revs drop from 800 to what looks like 500rpm when warm and choke kicks in which makes rpm go up to what looks like 1200rpm and so on.... today i dropped down to 2nd gear for a roundabout and engine check light came on... any ideas?

    • @dariuscristian9648
      @dariuscristian9648 7 років тому +3

      [MrPiro] hi! probably you have fixed it by now. If not you will have to clean the idle control valve. I have had the same issue. Now it runs smoothly and it is not as dangerous as it was when the engine stopped.
      You can do it yourself all you need is an 8 mm Key and a flathead screwdriver. Check youtube videos for this.

  • @solomonmatsimbi9168
    @solomonmatsimbi9168 2 роки тому

    Hi ford 2003 16v zetec wont start after entering hidden features help please,it crank but won't start and key can't clods windows

  • @whitelighting31
    @whitelighting31 3 роки тому

    Cleaned cluster cause was going heywire and beeping now petrol gauge and temperature gauge not working any help 😑

  • @pekkerbalint4688
    @pekkerbalint4688 7 років тому +1

    Hey, my dashboard not working: when its not on ignition, the fuel and oil sensors are stuck at the middle (engine off), and when I turn on the engine the tachometer and the speedometer just doesn't work. Could that be the problem if I accidentally entered test mode sometime?

    • @pekkerbalint4688
      @pekkerbalint4688 7 років тому +1

      Warning lights and background light are working tho.

    • @mrfixpl
      @mrfixpl  7 років тому +2

      Test mode can not make any changes to the instrument cluster. Check fuses and cable connections behind the instrument cluster.

  • @CarlMCL
    @CarlMCL 7 років тому +1

    What year is the Mk1 you tested, will it work on my 1999?

    • @mrfixpl
      @mrfixpl  7 років тому

      It should work.

    • @matthewsenior9751
      @matthewsenior9751 6 років тому

      It'll work on the mk1 and "mk1.5"/face-lift model

    • @Engineer9736
      @Engineer9736 2 роки тому

      Mk1 is any ford focus between 1998 and 2002 afaik

  • @jamesthomson1973
    @jamesthomson1973 7 років тому +1

    Does this work on UK models?

  • @ellinorbeatrice
    @ellinorbeatrice 8 років тому +5

    Hi, My Ford Focus 1.4 hatchback from 2000 has an intermitten Speedometor issue. The speedo needle drops to 0 at least once each time I use it. The kilometer showes - - - - sometimes as well. Moments later it would then be fine. No discernible drop in power and It never cut out on me and other dials in the dashbord works fine RPM, oil temp, petrol level etc, mechanic says I need to replace the entire dashboard/instrument cluster, others tell me i need the speed sensor replaced/cleaned - anyone who can confirm before I go spending mad money on my 16yr car? can this hidden menu tell my anythig? Thanks!

    • @mrfixpl
      @mrfixpl  8 років тому +3

      It can be faulty VSS (vehicle speed sensor) installed in gearbox or just wiring problem.
      You can go to the hidden menu, set it to speed and when your speedo drops so should the digital display. that confirms that this is not speedo fault and digital display is getting the same "current speed 0km/h" message.

    • @stevem4306
      @stevem4306 7 років тому

      Just had the speed sensor replaced in my focus mk1 that had the same issue with the speedo. Part is £12 off ebay and should be one hour labour (£50) to fit

    • @Syst3mSh0ck
      @Syst3mSh0ck 7 років тому +1

      Agreed this is either the VSS or faulty instrument cluster. Both are known to fail with the mk1 Focus. Has the car been looked at by anyone since you posted this?

    • @ellinorbeatrice
      @ellinorbeatrice 7 років тому

      Yes, it was the VSS - cost me 145 EUR to have fixed - its now fully functional again

  • @emilybigler3222
    @emilybigler3222 7 років тому +4

    I have a 2000 ford focus and recently all of my gages start going haywire. it started with my speedometer bouncing. now it's the whole system. does anyone know if this is a sensor problem or??

    • @mrfixpl
      @mrfixpl  7 років тому

      Check connectors at the back of the instrument cluster.

    • @emilybigler3222
      @emilybigler3222 7 років тому +1

      Thanks

    • @emilybigler3222
      @emilybigler3222 7 років тому +1

      how would I access that.

    • @mrfixpl
      @mrfixpl  7 років тому

      You need to remove instrument cluster.

    • @californiag7414
      @californiag7414 7 років тому +1

      Emily Bigler speed sensor gone

  • @kitoglouhamdi4719
    @kitoglouhamdi4719 4 роки тому

    Hallo Leute eine Frage wie geht die Kindersicherung an der Türen bj 2000 fort focus
    Grüsse

  • @begginers_luck9707
    @begginers_luck9707 3 роки тому

    Hi. My right front lock is not open. I dont hear the actuator working and it doesnt open with the key neither. Can you help me? Is there any way to test that? Figure that its impossible to open the door if the actuator doesnt work, the only way is to broke the door. Thanks

    • @enricol5974
      @enricol5974 3 роки тому

      maybe you altrady fixed, butry to spray some w40 inside

    • @lemonminge
      @lemonminge Рік тому

      @@enricol5974 inside the keyhole? My central locking is intermittent on passenger side door sometimes stops remote key lock from working...

  • @harunhusukic5294
    @harunhusukic5294 3 роки тому +1

    Can I make needle sweep with this

    • @mrfixpl
      @mrfixpl  3 роки тому +1

      Only to test the gauges. There's no needle sweep at start feature in this instrument cluster.

  • @bahikettab9068
    @bahikettab9068 6 років тому

    What is the reason for these sounds Intermittent sounds every three seconds ford focus 2001

    • @mrfixpl
      @mrfixpl  6 років тому

      Seat belt reminder?

  • @paulady1805
    @paulady1805 5 років тому

    How can i see the gas consumption on this car?

    • @mrfixpl
      @mrfixpl  5 років тому +1

      Trip computer was an optional equipment. Separate display installed above center air vents instead of the little compartment.

  • @kulifaimark4144
    @kulifaimark4144 5 місяців тому

    P117 in 01:18 what does this code means exactly ?

  • @engageinfinity4302
    @engageinfinity4302 4 роки тому

    Is this for focus without board computer, for mine don't work.

    • @mrfixpl
      @mrfixpl  4 роки тому

      I've tried it in many Ford cars and it worked in each one.

    • @engageinfinity4302
      @engageinfinity4302 4 роки тому

      @@mrfixpl don't know why then don't work

    • @engageinfinity4302
      @engageinfinity4302 4 роки тому

      @@mrfixpl my mistake, it's work. I didn't do how to trigger it. Thanks for the tip and sorry for my mistake 👍

  • @create_forward7531
    @create_forward7531 8 років тому +4

    so I don't understand what it all means

  • @erandhasani9687
    @erandhasani9687 7 років тому

    year?

    • @Engineer9736
      @Engineer9736 2 роки тому

      Mk1 is any ford focus from 1998 to 2002 afaik.

  • @jahshjahsh2002
    @jahshjahsh2002 6 років тому +1

    all lights in panel flickering, also peeping, also trip milage tares to zero. what is the problem with my focus mk1

    • @mrfixpl
      @mrfixpl  6 років тому +1

      Most likely faulty alternator. Check voltage with engine on.

    • @jahshjahsh2002
      @jahshjahsh2002 6 років тому +1

      thanks, i am impressed by your quick response.

  • @charlesmalen6368
    @charlesmalen6368 5 років тому +2

    Haci Türkçe yokmu? Sen ne yaptın ben anlamadım

  • @leofranssen
    @leofranssen 4 місяці тому

    Nice music, explaining the submenu's would even be nicer....

  • @patriotpat1243
    @patriotpat1243 8 років тому +1

    worked once, now all it says is test and goes to 0.0

    • @mrfixpl
      @mrfixpl  8 років тому +1

      +Patriot Pat check if the trip button is not stuck pressed.

    • @patriotpat1243
      @patriotpat1243 8 років тому +2

      mr-fix it works, I was an idiot and did it wrong the second time lol

  • @aleksandardjurovic8882
    @aleksandardjurovic8882 4 роки тому

    Fuel comsuption ???

  • @xxSadowpak
    @xxSadowpak Місяць тому

    My focus has no limiter, the color is red. It's petrol.

  • @theantonshow393
    @theantonshow393 9 років тому

    All my dash clocks have just stopped including the clock ment to be taken kids on holiday tomorrow gutted

    • @mrfixpl
      @mrfixpl  9 років тому

      Check fuses.

  • @Nohandle2025
    @Nohandle2025 Рік тому

    Does all that shit when I'm driving... Fucked?