Do you have any videos for the front suspension lift installation or short video. Had a car come to my shop for custom audio installation and his front set up doesn't look good at all. Lower ball joint is angled when on the ground, upper control arm is tight to the frame. I believe he is using the original spring and shock which could be the issue or it's something else. I will do a video tomorrow of how it looks to share in your comments if you could help or explain any issue you see. I've never done these, Primarily audio builds, installs and repairs. Much appreciated and awesome content.
@@whiteoneauto Thank you. Definitely something with this set up doesn't look right with how the ball joints are angled and I also noticed the front end sits slightly higher than the rear. His coil springs look curved or pinched as well because 1 side touches the physical shock.
I'm trying to find out what spring rate I need for my 88 box. Performance driving, 15 or 16 in wheels. It's 4200lbs with me in it but I'm not sure about how much the front and rear weigh separately. I think I'm going with qa1 sb 383 as well w/ aluminum heads..... Any help appreciated....
@@whiteoneauto appreciate your reply. As I've seen a very knowledgeable and upstanding brotha from your videos, I wish you nothing but future success. Keep the videos coming.
Yoooo I got a TH 400 I'm tryna put in my 89 caprice what did you have to do to run that trans this is my first time doing a swap so any info will help it had a 200-4r in it right now
Summit crosmember that will bolt TH400 in a caprice. You will need a different driveshaft. I would make a new other that cutting the original one down.
FINALLY, SOMEONE WHO DOES A DETAIL OVERVIEW OF THE PARTS THAT ARE USED IN THE BOX CHEVY COILOVER CONVERSION... MUCH APPRECIATED... 😎💪🏿💪🏿💪🏿💪🏿💪🏿
There is nothing like a honest mechanic can you get nothing but blessings that way 👌🏿
Thanks
And a good vehicle on top of that
This was a great video and showed the detail of the work. Great jobs💯💯💯
What’s the part number for the bracket on the bottom of the qa1 shock
Was wondering if you remembered the link for the bushings
Does the rear coilovers eliminate the coil springs? Thanks
Yes.
Do you have any videos for the front suspension lift installation or short video. Had a car come to my shop for custom audio installation and his front set up doesn't look good at all. Lower ball joint is angled when on the ground, upper control arm is tight to the frame. I believe he is using the original spring and shock which could be the issue or it's something else. I will do a video tomorrow of how it looks to share in your comments if you could help or explain any issue you see. I've never done these, Primarily audio builds, installs and repairs.
Much appreciated and awesome content.
No detailed video yet.
@@whiteoneauto Thank you. Definitely something with this set up doesn't look right with how the ball joints are angled and I also noticed the front end sits slightly higher than the rear. His coil springs look curved or pinched as well because 1 side touches the physical shock.
ua-cam.com/video/jaXBaMaTFXI/v-deo.html
Added a video link for the car front suspension that is in question
I'm trying to find out what spring rate I need for my 88 box. Performance driving, 15 or 16 in wheels. It's 4200lbs with me in it but I'm not sure about how much the front and rear weigh separately. I think I'm going with qa1 sb 383 as well w/ aluminum heads..... Any help appreciated....
Put the car on a set of scales that give you front back and side to weight measurement. Then select your spring size.
Where you located... whats your turn around time for a full suspension and brake job?
Detroit,MI. Normally about a week. Call the shop 313-264-1689 leave message we will get back with you.
Do you/can you still get the "floaty" ol school ride with the upgrade or does it just depend on which coilovers you get and how you adjust them?
The ride feel very controlled. If you turn the wheel the car turn not thinks then turns.
@@whiteoneauto appreciate your reply. As I've seen a very knowledgeable and upstanding brotha from your videos, I wish you nothing but future success. Keep the videos coming.
How are they working out for you?
GREAT!
@@whiteoneauto Nice! What size wheels on the box?
Yoooo I got a TH 400 I'm tryna put in my 89 caprice what did you have to do to run that trans this is my first time doing a swap so any info will help it had a 200-4r in it right now
Summit crosmember that will bolt TH400 in a caprice. You will need a different driveshaft. I would make a new other that cutting the original one down.
How much u guys charge to install this set up I have l my qa1 parts for front and rear
Call the shop 313-264-1689.
Where can i find those coil over mounting brackets for rear
That QAI coilover kit we have 2 in-stock. 313-264-1689
Love this brother
What do u use for tire rods in the front
Stock replacement tie rod ends but replaced the sleeve with bullet aluminum sleeves.
Where did u get the adjustable arms
They made by UMI if you can't find them we have some in stock. You can call the shop and leave a message 313-264-1689.
Say Bro....do you have any connections in Milwaukee? Great footage...work
No sir
I can’t find the adjustable lowers to save my life💪💪💪💪
I have customer selling some. Email shop if interested Fixyourcar@whiteoneauto.com
Hey where you guys located at
WhiteOneAutoLLC
12245 Harper Detroit MI 48213
313-264-1689
Where you located
WhiteOneAutoLLC
12245 Harper Detroit MI 48213
313-264-1689 call for appointment please
Where u located
WhiteOneAutoLLC
12245 Harper Detroit MI 48213
313-264-1689 call for an appointment. Thanks