Thank you. This was very helpful. Someone asked me to maintain his sewing machine (this one), but I never used one, much less disassembled one. Now he got back a cleaned and oiled machine.
THANK YOU!!!!! i do have THIS EXACT machine and had it at the workshop recently, for the first time after a span of eleven years of regular hobby use. i knew nothing was broken, yet dry and dirty and few things suffered from dried lube. seeing you clean it with that paintbrush is EXACTLY what i would love to do every now and the, THANK YOU for showing me how easy it it to open it in terms of where to start and what, where.. 0_0 amazing!!! THANK YOU!!!!!
my account here on youtube is a watch-only one, yet i just added banner and profile picture and about - whereas i, for the first time, noticed i do have one subscriber - YOU!! aaaw!!! thank you, that "1 subscriber" looks soooo funny :D
Oiling the head parts on the 6091 is much more of a nightmare than with this due to all the extra moving parts packed in there for the dual feed. Otherwise it's the same machine. When I got mine it was frozen up with hardened white grease and all that had to be cleaned out. I replaced it with Super Lube (which does not harden like that). Triflow grease also works but I like Super Lube because it has a plastics and elastomers compatibility list (it can be used with basically everything but polycarbonate and natural rubber) The way I like to oil is apply a drop turn the machine by hand a few times then use a microfiber cloth or q-tip to remove any excess oil that's still on the outside of the rotating part.
@@sewingmachines6369 thank you. Have you tried to take the hand wheel off? I’m wondering if it is a reverse feed screw. Mine won’t budge. Thanks again.
Tengo una PAFF 955hobbymatic y no e podido coseguir quien me la arregle. Choca la aguja contra el cangrejo. Medio la arreglaron pero quedó cociendo al revés.
Thank you. This was very helpful. Someone asked me to maintain his sewing machine (this one), but I never used one, much less disassembled one. Now he got back a cleaned and oiled machine.
THANK YOU!!!!! i do have THIS EXACT machine and had it at the workshop recently, for the first time after a span of eleven years of regular hobby use. i knew nothing was broken, yet dry and dirty and few things suffered from dried lube. seeing you clean it with that paintbrush is EXACTLY what i would love to do every now and the, THANK YOU for showing me how easy it it to open it in terms of where to start and what, where.. 0_0 amazing!!! THANK YOU!!!!!
my account here on youtube is a watch-only one, yet i just added banner and profile picture and about - whereas i, for the first time, noticed i do have one subscriber - YOU!! aaaw!!! thank you, that "1 subscriber" looks soooo funny :D
Not only did this video show me how to take apart my machine but it also has wicked background music.
I cannot follow. I don't understand how the they take of the cover in the first few seconds. 😏
Es una belleza de máquina y para trabajo pesado es increíble.
Oiling the head parts on the 6091 is much more of a nightmare than with this due to all the extra moving parts packed in there for the dual feed. Otherwise it's the same machine. When I got mine it was frozen up with hardened white grease and all that had to be cleaned out. I replaced it with Super Lube (which does not harden like that). Triflow grease also works but I like Super Lube because it has a plastics and elastomers compatibility list (it can be used with basically everything but polycarbonate and natural rubber)
The way I like to oil is apply a drop turn the machine by hand a few times then use a microfiber cloth or q-tip to remove any excess oil that's still on the outside of the rotating part.
I acidenily removed my needle plat and it is impossible to put back on. I see you took it off but didn't show putting it back on.
Great video! I have a 6091 with a dead motor. Are they difficult to remove and put a new one in?
hello, the engine is easy to change. thanks
hello thank you for an amazing video.
Is there a way to center the needle position on this machine. Mine veers slightly to the left.
thank you
on the head itself, from a bird's eye view, you can see 2 nuts or 2 ibus, rotation to the left,pozzzzz
@@sewingmachines6369 thank you. Have you tried to take the hand wheel off? I’m wondering if it is a reverse feed screw. Mine won’t budge. Thanks again.
@@sewingmachines6369 could you explain with more detail. Where are the nuts? I have the same issue with my machine. Could you make a video?
Merci
Great video. May i ak how to adjust the needle postion that is gone toward the left. Thanks
there is an ibus or nut that moves .under the bulb pozzzzz
hello! do you have spare parts for this machine?
Hi , my sewing machine is stuck and it’s really really difficult to turn the wheel. What do I need to do?
clean the gripper so that the thread passes through
My pfaff tiptronic 1069 pressure bar lifter not working, it can't lift the foot up and down, could you help me please! Many thanks.
greetings, spray yourself with the vd spray, to the depth of the needle, and it will be ok
@@sewingmachines6369 Thank you very much for your reply, I will try it.
Hello, I have set the upper tension on my sewing machine to the highest level, but loops are still forming. Can you help me, please.
Hi, I can. Simply tighten the bottom piece. There's a screw on the piece. Where did you put the coil, and the upper one give way
Thank you
👍👍🇲🇽
Καλησπέρα εχω θέμα με το ποδαράκι δεν κατεβαίνει τελείως
Πώς μπορώ να το ρυθμίσω;
Tengo una PAFF 955hobbymatic y no e podido coseguir quien me la arregle. Choca la aguja contra el cangrejo. Medio la arreglaron pero quedó cociendo al revés.
El PFAFF 955 es una gran máquina porque el teclado en el comando selecciona el programa.
No check of the bobbin winding mechanism.
TBF not much can go wrong with the bobbin winder on the 6085 / 6091.
1471