I bought a 3/4" hole punch from a craft store. I sit and watch TV and squeeze that punch knocking out cards from cereal boxes and just about any cardboard I have. Great video. Thanks for posting.
Good job Buck. I did this too, but then I found a even better cutter. I use the metal cap on a shotgun shell. Make yourself a sizer at 3/4 inch and size down the shell cap. Heat the metal cap with a torch and pull off the plastic hull. Then use a machine screw and lock nut through the middle so you can put it into your drill press. Thin metal on the shell cap cuts real easy and never goes dull.
I use a 20 gauge brass, minus the plastic, with 4 slots filed in the exterior wall. Then slightly bend the 4 sections inward for clearance. I used 1/4-20 bolt, nut, lock washer hider. Chuck it in my drill press and away I go! Cheap. Effective etc. I couldn’t find my hole saw bit to copy his, but mine works ok too
I watched several videos tonight and was about to spend $40 on punches and supplies. I come across your video and WOW. I have old hole saws I can use. Thank you so much for your video.
Remember, a 3/4” hole saw creates an outside dimension of 3/4”. For the inside dimension to be 3/4”, a larger size saw would be needed, UNLESS the inside edge is ground away.
I use a 3/4" hole punch from Michaels for black powder shells, but this is genius! I was wondering about other materials for wads and spacers, and this sounds like the ticket.
Great video sir. Thanks for sharing. I also liked the flip top vitamin bottle as a jar to keep them in. I use a couple of vitamins that have those lids and never thought about what to do with them.
See the older generation's use. Common sense and ingenuity. The result is good quality and a good feeling, unlike the newbies with good feelings/emotions and crappy results.
I found a hole 🕳 punch block at harbor freight. It punches from 1/4 inch to 3/4 inch. The 3/4 works great in 12 gauge. Not as fast but in a few minutes I can have a lot of 3/4 overshot cards. And this punch set will punch metal as well for other projects. I use about any cardboard box I find.
I made the same but I cut a slot in the side ,when the wad reaches the slot it is thrown out, so make a shield round the pillar drill.22mm cutter for 12g
You can go to Michael's and get a 3/4" hole punch and use any card you can get your hands on, including your unwanted Xmas cards, cereal boxes, your ex-wife's photos! If you want to go REALLY cheaper than that, use sheep's wool or cotton balls and seal with melted candle wax.
The best untapped resources in the USA. The older folks who have common sense!
Thank You Sir.
indeed a wiser man..
This guy is GREAT!!!!!!!!!!! I hope he's still around!
We need more people like this on UA-cam, could learn so much
Whichever kid gets to spend Christmas at this Grandpa's house is a lucky son of a gun
Well said.
Soak it up while you can. These older folks won't be around forever. This guy reminds me of my grandpa, I'd give 1000 of my days for 1more with him
This old timer is a badass
i hope he is ok...he hasnt uploaded in over a year now
My grandfather is a navy seebee from WW2 much respect sir thank you for your service
I bought a 3/4" hole punch from a craft store. I sit and watch TV and squeeze that punch knocking out cards from cereal boxes and just about any cardboard I have.
Great video. Thanks for posting.
Very Intelligent man Thank you for the Hint and Tips ... God Bless
Good job Buck. I did this too, but then I found a even better cutter. I use the metal cap on a shotgun shell. Make yourself a sizer at 3/4 inch and size down the shell cap. Heat the metal cap with a torch and pull off the plastic hull. Then use a machine screw and lock nut through the middle so you can put it into your drill press. Thin metal on the shell cap cuts real easy and never goes dull.
This is a smart idea. Way easier even than using a hollow punch mounted in a vise and whacking them out with a rubber mallet. Thanks!
Great idea using the drill press. It has to be easier and faster and much cheaper too. In a contest, you would win "America's Grandpa" :)
I use a 20 gauge brass, minus the plastic, with 4 slots filed in the exterior wall. Then slightly bend the 4 sections inward for clearance. I used 1/4-20 bolt, nut, lock washer hider. Chuck it in my drill press and away I go!
Cheap. Effective etc. I couldn’t find my hole saw bit to copy his, but mine works ok too
Very innovative and clever. Pay attention youth!…. There is a wealth of value in WISDOM!
I love it Buck!! Gonna make up several of these... I just picked up a drill press! Wade
I watched several videos tonight and was about to spend $40 on punches and supplies. I come across your video and WOW. I have old hole saws I can use. Thank you so much for your video.
Great idea. I got some old hole saws that are wore out, now I can give them a new life. Thanks for the tip.👍
Remember, a 3/4” hole saw creates an outside dimension of 3/4”. For the inside dimension to be 3/4”, a larger size saw would be needed, UNLESS the inside edge is ground away.
Genius !! Simple, cheap and effective.
Instantly liked this guy.
Great tip. And thanks for your service.
Big thumbs up. My father was a Sea Bee stationed in the Aleutians during WWII... Can do! I wasn’t smart enough so I joined the Marines instead.
thanks friend , this is very helpful...God bless...doug (Canada)
Yes sir there's truly more then one way to skin a cat.. Thanks from Florida
Great tip friend , just off to make one !!!!! Good hunting
You remind me of my Dad. God bless you sir. Very good video
Just thought I'd leave a comment. I saw this video a year ago and I made some with this method, they work great!
I use a 3/4" hole punch from Michaels for black powder shells, but this is genius! I was wondering about other materials for wads and spacers, and this sounds like the ticket.
Great video sir. Thanks for sharing. I also liked the flip top vitamin bottle as a jar to keep them in. I use a couple of vitamins that have those lids and never thought about what to do with them.
That is slick! I'm going to give that a try. Thank you for the video.
Very helpful! Thank you! 👍
Cereal boxes, shoe boxes and all kinds of various cardboard packaging works too.
Thank you for the valuable information, buck. I’ll be trying this out for my 12 and 20 loads.
Thanks for the good ideas.
Great idea.. thank you for your contribution sir.
Wow! Terrific advice! Thanks!
Awesome thanks for sharing
I like the idea of cork wads for black powder loads. Felt is generally recommended, so cork seems to be a good substitute.
Awesome. Thank you!
got to be the seebee hat . Thanks for your service
Thank you!
Yes Sir, you helped answer a lot for me. Thank you sir.
See the older generation's use. Common sense and ingenuity. The result is good quality and a good feeling, unlike the newbies with good feelings/emotions and crappy results.
I appreciate the tip.
Innovative, thank you for your video.
thank you sir shared info is wonder thing.
I found a hole 🕳 punch block at harbor freight. It punches from 1/4 inch to 3/4 inch. The 3/4 works great in 12 gauge. Not as fast but in a few minutes I can have a lot of 3/4 overshot cards. And this punch set will punch metal as well for other projects.
I use about any cardboard box I find.
Excellent video
Good idea. Thanks for sharing.
Thanks for that tip.great idea.
Old school reloader… great idea
I just getting ready to order some punches from Amazon while surfing UA-cam. Then you pop up with the best idea ! 👍👍👍
GREAT info. thank you.
your idea works great.
thank you !!!
Thanks, great idea
thank you so much for sharing
Simple and Hope your still Kicking!
Hello there Buck, you have won a hammer made by 5 TONS W/GUNS! Thank you for your time please contact us soon.
Great tips.... how about replacement for the plastic wad?
Can Do Seabee, good vid
I made the same but I cut a slot in the side ,when the wad reaches the slot it is thrown out, so make a shield round the pillar drill.22mm cutter for 12g
I noticed he did not say what the diameter of the hole saw he used for 12 GA.
Mr. Buck, can I reload 12 gauge ball slug using fiber wads only no plastic wads if so do you have a recipe.
Can I buy a couple different sizes from you? You’ve got the method down pact.
I use a 20 gauge brass
What size do you for the 12gauge?
Can Do MCB74
What size do you use for 12 gauge over powder? The 3/4 is too small
3/4 is for 20ga... 7/8 is for 12ga I believe...
Can I buy one of those for a 12 gauge?
You can go to Michael's and get a 3/4" hole punch and use any card you can get your hands on, including your unwanted Xmas cards, cereal boxes, your ex-wife's photos!
If you want to go REALLY cheaper than that, use sheep's wool or cotton balls and seal with melted candle wax.
Unfortunately I don’t have a drill press. Bummer!
Does anyone have a link for the various sizes cork sheet pack? I’ve searched Amazon and cannot find it!
Videoları Türkçe alt yazılı yapabilirmisiniz
I want