Doc, you keep giving great tips. I've struggled with removing the battery with my 09 RK and my current ride 2012 FLHTK. I ain't never forgetting this tip...Whish that i could give you a hundred thumbs up...
Thanks Doc!!! The strap on my 2010 Limited lasted only 3 years so I took an old luggage strap and made my own... the tip with the pick will come in handy!!!! BTW... I hope YOU, the family and all the great folks at LCHD have a Very Merry Christmas this year!!! Be Blessed my friend!!!!
Thank you for the detailed video, great work. I wish HD would add pos/neg jumper connections to their batteries. The jumper can be tucked behind the left panel for easy access in case a jump start is needed. I have a 2020 Heritage Softail and battery access isn't easy.
Thanks Doc, I didn’t realize that HD changed this so much. I may have to replace the battery when my CVO Street Glide gets all the painted surfaces replaced in the shop…
Speaking of lifting the battery. I use a piece of milk carton about 3/4" wide and about a foot long. Put a small hole in each end and use the terminal screws to screw it to the battery and it makes a nice lifting handle. I wrapped it in duct tape and printed Save on it. It's my go to tool for working on battery.
Bro, thats to complicated for a noob like me. And when you said something about removing a fuse, it was over for me at that point. Like u think a first time noob would even know where the fuse is, then what fuse to remove the all those cables in the way of battery. Then if that wasn't enough. I would get stuck on trying to remove the seat. So all the other problems i wouldn't even know how to get to because the seat alone i would be stuck. My pops who passed away, his Harley trike been in garage for 1 year, it wont start, don't even go there, cuz i don't even know how to start it. But my brother does and it wouldn't start for him and then he went back home. So i just wanted to see a video of Step by Step with tools list needed and how to remove and replace with a new battery. But i need someone to make the Ultimate Noob young punk who don't know anything about nothing video so i could get my pops bike started. ✌️
Big G'day Doc from Down Under 🇦🇺 THANKS again for another great Harley Tip & all your other videos this year. Hope you & the family have a awesome Xmas period ♥️🎁🎄🎉🙏 May all your days be Harley days 🖤🧡🖤 Safe travels 🙏♥️🐾🐾🇦🇺
I may or may not have just snipped that little plastic window after i had it off the first time. Not like its going anywhere with the t40s and the seat on top of it.
Doc Harley, thanks for the video. I'm planning on changing out my battery soon and your video makes it seem simple enough even for me to do. One question though. I have the audible alarm system on my '21 FLTRK. How do I disconnect the battery WITHOUT setting off the alarm? Thanks again!
It's a recommended best practice, Doc even says so at 2:59. You do it for 2 main reasons, 1, for safety because the bike could accidentally start up and 2 because you could cause an electrical short which could damage the ECM unit or some other expensive part.
Will a battery replacement will erase my ECM map ? I had a Dyno fitting las year and I don't want to lose it ? Thank you very much Doc !!! Y'r videos and explanations are cristal clear !!!!!
It has to do with Current Flow and the sensitivity of electronics. Taking the ground off first is the safer way to stop current flow. Speaking of safety. Taking off the positive first takes the chance of the wrench touching the ground side. This creates a direct current from one side of battery to the other. This will heat up the wrench and you to burning levels. Retuning to electronics. To have the ground side connected and the the positive side send a violent current that can destroy an electrical part. These are just a few reasons….Doc
I had a problem at one time , bolts would come loose and not charge battery, then it would not start. To fix I used 1/4" outside Star Washer on the bolts - it Stopped the Bolts from loosening Up , no more charging problem or No Starts with out taking off Seat and fighting up bolts.
Hello Doc. can you tell me what is causing my xl1200ns iron 2019 Wen i give gas it jerks and again when releasing the throttle and the clutch is doing the same thing and it's hard to maintain 30 km/h it's jerking and i keep shifting all the time never believe that a HD 1200 Iron could be having so much problem, it has only 5000km what can do it's my firs Harley and dont know much about them
With your first experience and knowledge at this time. I suggest bringing it to a trusted shop. It could be as easy as loose battery connections. But you don’t know where the battery is. There is plenty of people here who will tell you what to check, but again you have no idea what they are describing. It will take time for you to learn. It will be possible down the road…..Doc
thank you for your fast response i know everything about it, like where the batterie and the other mechanical part my concerne is only that jerking between the gear change and clutch release and a loud noise when rolling over big bump sound like metal to metal and i cant find it. @@LowCountryHarleyDavidson
I’m sorry Mike. Not sure what you are asking. Low Country Harley-Davidson has been doing this for 8 years. We do not have them all written down. Keep searching…..Doc
that strap was completely eroded by the time i needed a new battery on my 08 UG, by the way that OEM battery lasted 12 years before it struggled to start my 10.5:1 motor, been through two after market batteries since, so everyone who says stock sucks can blow me
Had this problem on my 2012 Ultra the first time I had to get to the battery. Hasn't been an issue since then because I cut the dang plastic tab off the cover! That might make you and some others cringe, but it's been a non issue since then.
@@LowCountryHarleyDavidson sorry to put it that way Doc, but motorcycles shouldn't be complicated to do certain tasks. I'm not into all the electronics of today's vehicle's. That's why appreciate my 33yr old EVO, it's something I still can maintain on my own n is reliable to this moment. I like the newer models, not the complexities about them, its just a motorcycle. I loved Harley-Davidson from the time I was 6yrs old, since 1965 nothing has changed I just appreciate the old school craftsmanship n still works too the day. Love your channel, thanks for what you do for us.
My God this is getting more stupid buy the year. Definitely not impressed with my last couple of harley davidsons. Hate to say it but it might be time to look at something else when this one is done.
I wish every Harley Dealer in every state had a “Doc Harley”! Life would be a lot better.
Thank you. There are many excellent techs out there. They just don’t have my voice 😆……Doc
100% this. Love his videos!
This is just another thing that makes me appreciate my 2002 Road King. Thanks for that.
Doc, you keep giving great tips. I've struggled with removing the battery with my 09 RK and my current ride 2012 FLHTK. I ain't never forgetting this tip...Whish that i could give you a hundred thumbs up...
We….I appreciate your support….Doc
That 90 degree pick is a excellent idea. That thing is hard to get to
Thanks Doc!!! The strap on my 2010 Limited lasted only 3 years so I took an old luggage strap and made my own... the tip with the pick will come in handy!!!! BTW... I hope YOU, the family and all the great folks at LCHD have a Very Merry Christmas this year!!! Be Blessed my friend!!!!
We so appreciate your thoughts….Doc
😎👍
Big thumbs up for the channel...
Big thanks….Doc
Another great tip, thanks Doc.
I just recently learned this trick. I wish I would have seen your excellent tip first! It would have saved me 30+ minutes of head scratching!
Always informative and appreciated Doc 👍🏼👍🏼👍🏼
Great job Doc Harley, you helped an old retired mechanic out. You have the best videos 👍🏻✌🏻
Thanks for watching 👍…Doc
Very useful information Doc. Thank you for sharing. Well done.
Nice tip Doc. I could have used it two weeks ago. Took me a while to figure out how to get that over the tab.
Thanks Doc.....amazes me how little care and cleanliness guys have on a 30K Harley....Merry Christmas to you and LowCountry HD
Thanks, you too…..Doc
EXACTLY the info I was looking for. I was trying my best not lose my cool and break a clip. THANK YOU DOC !!!
Glad we could help Stomp….Doc
As always doc. Your tips come in so handy. Thank you Sir
Thank you Paul….Doc
Thank you for the detailed video, great work. I wish HD would add pos/neg jumper connections to their batteries. The jumper can be tucked behind the left panel for easy access in case a jump start is needed. I have a 2020 Heritage Softail and battery access isn't easy.
Thank you so much.
Always Outstanding Advice Once again! Happy Holidays and Thanks again Doc!
Blessing to you also….Doc
Great vid Doc, thanx.
Very welcome….Doc
Thanks Doc, I didn’t realize that HD changed this so much. I may have to replace the battery when my CVO Street Glide gets all the painted surfaces replaced in the shop…
Extremely helpful Doc, thank you.
You are awesome Doc ,Thanks for all the tips appreciate it.
Speaking of lifting the battery. I use a piece of milk carton about 3/4" wide and about a foot long. Put a small hole in each end and use the terminal screws to screw it to the battery and it makes a nice lifting handle. I wrapped it in duct tape and printed Save on it. It's my go to tool for working on battery.
Send pictures to our Email address…Doc
Thanks a lot - this was my current question.
Love your Channel
Greetings from 🇩🇪
Hi Doc. This video was three months late😂. That little plastic cover really tested my patience. I prevailed, thought. Thank you. Merry Christmas.
Thanks for sharing. We will strive to be more in tune😆….Doc
@@LowCountryHarleyDavidson you're doing fantastic. Don't change a thing. You're appreciated more than you know.
My 1967 XLCH had no battery! I sure miss that bike.
Thanks for sharing a classic😍….Doc
Bro, thats to complicated for a noob like me. And when you said something about removing a fuse, it was over for me at that point. Like u think a first time noob would even know where the fuse is, then what fuse to remove the all those cables in the way of battery. Then if that wasn't enough. I would get stuck on trying to remove the seat. So all the other problems i wouldn't even know how to get to because the seat alone i would be stuck. My pops who passed away, his Harley trike been in garage for 1 year, it wont start, don't even go there, cuz i don't even know how to start it. But my brother does and it wouldn't start for him and then he went back home. So i just wanted to see a video of Step by Step with tools list needed and how to remove and replace with a new battery. But i need someone to make the Ultimate Noob young punk who don't know anything about nothing video so i could get my pops bike started. ✌️
Make the phone call to a dealer to pick it up! Step away from the bike and tools. Honor your father by doing the right thing….Doc
Love the tips, and this channel
Merry Xmas Doc!!
Merry Christmas friend….Doc
Big G'day Doc from Down Under 🇦🇺
THANKS again for another great Harley Tip & all your other videos this year.
Hope you & the family have a awesome Xmas period ♥️🎁🎄🎉🙏
May all your days be Harley days 🖤🧡🖤
Safe travels 🙏♥️🐾🐾🇦🇺
Thanks, you too!….Doc
I may or may not have just snipped that little plastic window after i had it off the first time. Not like its going anywhere with the t40s and the seat on top of it.
Doc Harley, thanks for the video. I'm planning on changing out my battery soon and your video makes it seem simple enough even for me to do. One question though. I have the audible alarm system on my '21 FLTRK. How do I disconnect the battery WITHOUT setting off the alarm? Thanks again!
I believe you will find a few videos showing how to do that….Doc
Is it necessary to remove the maxi fuse before you remove the battery? I've never taken it out in the past.
It's a recommended best practice, Doc even says so at 2:59. You do it for 2 main reasons, 1, for safety because the bike could accidentally start up and 2 because you could cause an electrical short which could damage the ECM unit or some other expensive part.
Yes….Doc
@@LowCountryHarleyDavidson
I’m going to need a video on removing the fuse. I wasn’t given any manuals for my 2020 FLHXS 😂😂
Thank you Doc Harley!!
You are welcome….Doc
Will a battery replacement will erase my ECM map ? I had a Dyno fitting las year and I don't want to lose it ? Thank you very much Doc !!! Y'r videos and explanations are cristal clear !!!!!
No a battery gone dead will not erase a ECM. I do suggest you ask your tuner for a copy of your tune on a supplied thumb drive…..Doc
Oh so many thanks for your quick reply Mr. Doc !!!
Great info Doc, much appreciated!!!!
Thank you…Doc
Thank you Sir!!!
Thanks!
Why take out first negative and after positive? What will happen?Also when you get it back you put first positive or negative and why?Thanks.
It has to do with Current Flow and the sensitivity of electronics. Taking the ground off first is the safer way to stop current flow. Speaking of safety. Taking off the positive first takes the chance of the wrench touching the ground side. This creates a direct current from one side of battery to the other. This will heat up the wrench and you to burning levels.
Retuning to electronics. To have the ground side connected and the the positive side send a violent current that can destroy an electrical part. These are just a few reasons….Doc
Hey Doc, There's no video out there for the 2024's yet. How different is the battery removal on the 2024 baggers? Thanks
Same as before just the BCM is on top instead of the ECM🤷♂️…..Doc
I’m sure this is all in the owners manual…….right? Great job!
Epic video! Thank you!!!
Glad you liked it…..Doc
I had a problem at one time , bolts would come loose and not charge battery, then it would not start. To fix I used 1/4" outside Star Washer on the bolts - it Stopped the Bolts from loosening Up , no more charging problem or No Starts with out taking off Seat and fighting up bolts.
Thanks for sharing….Doc
Doc u r great as always!
You are too kind. I appreciate your support….Doc
That was a great video!! Thanks!!
Glad you liked it…..Doc
thank you kindly sir!!!!!
You are welcome…Doc
My 09 sportster negative terminal is a pain to get the bolt started lol
Agree, so the Factory suggest removing the ground at the motor( like that’s any easier 🤦♂️…..Doc
Hello Doc.
can you tell me what is causing my xl1200ns iron 2019
Wen i give gas it jerks and again when releasing the throttle and the clutch is doing the same thing and it's hard to maintain 30 km/h it's jerking and i keep shifting all the time
never believe that a HD 1200 Iron could be having so much problem, it has only 5000km what can do it's my firs Harley and dont know much about them
With your first experience and knowledge at this time. I suggest bringing it to a trusted shop. It could be as easy as loose battery connections. But you don’t know where the battery is. There is plenty of people here who will tell you what to check, but again you have no idea what they are describing. It will take time for you to learn. It will be possible down the road…..Doc
thank you for your fast response
i know everything about it, like where the batterie and the other mechanical part
my concerne is only that jerking between the gear change and clutch release and a loud noise when rolling over big bump sound like metal to metal and i cant find it.
@@LowCountryHarleyDavidson
Great vid thanks
Glad you enjoyed it….Doc
The strap is striped under the battery. 😔 I used the battery bolts to remove it. 🏍💨🏍💨
The strap was under my battery so I had to get long M6 bolts and washers to get the battery out
❤❤❤❤
This guy is the Harley Guru 😎
Thanks but no, just a Harley-Davidson Tech who has been wrenching for a long time…..Doc
Thank you, I haven’t had to go there on my 2022 road glide limited yet…….😅 I’m a cheapskate so I do as much of my own mechanics as I can.
That’s not cheap. That’s taking personal care of your investment….Doc
Where is the original battery video ?
I’m sorry Mike. Not sure what you are asking. Low Country Harley-Davidson has been doing this for 8 years. We do not have them all written down. Keep searching…..Doc
So glad I ride a Triumph Thunderbird! (Sorry Doc!) (❁´◡`❁)
Sad…..Doc
thank you thank you thank you
You are very welcome….Doc
OMG. Where have you been all my life?
Most of my life at Low Country Harley-Davidson in Charleston SC. Stop by and visit….Doc
If your going to work on your own bike. The best tool to get is the Factory Service manuals and this channel.
Good tip!…..Doc
that strap was completely eroded by the time i needed a new battery on my 08 UG, by the way that OEM battery lasted 12 years before it struggled to start my 10.5:1 motor, been through two after market batteries since, so everyone who says stock sucks can blow me
Enjoyed your strong opinion….Doc
Had this problem on my 2012 Ultra the first time I had to get to the battery. Hasn't been an issue since then because I cut the dang plastic tab off the cover! That might make you and some others cringe, but it's been a non issue since then.
A non issue with maintaining agree but now the battery can rock in the bike. Please check your connections periodically between services….Doc
Seems like a great design for a roadside repair 🙄
Hoping you’re never there….Doc
Why do they make things so hard now. Is it so you have to take it to a shop?
I don’t think so. It changed when they decided to cut cost and use plastic🤷♂️….Doc
Man I thought the M8 Softail was a pain in the ass to get the battery out of
😆 it still is the King of Battery removal PTS…..Doc
I cut the tab off mine
😮🫣…….Doc
I wish Doc Harley was my mechanic
Thank you…..Doc
Harley should get some new engineers and designers to make their bikes easer to work on , what a s__t show for just a battery !
We that work in the field realize some engineers have not worked on the product….Doc
HD designs it so you can't work on it n have to take it to the dealership
tin so much in NTB Or Lombok Cinta Laura Kiehl Bali Australia
plastic on a Harley is blasphemy
😆……Doc
Its just the new crap, my old HD ain't like that, thank God 😂
Glad you love and keep the Old School running but it’s not crap…..Doc
@@LowCountryHarleyDavidson sorry to put it that way Doc, but motorcycles shouldn't be complicated to do certain tasks. I'm not into all the electronics of today's vehicle's. That's why appreciate my 33yr old EVO, it's something I still can maintain on my own n is reliable to this moment. I like the newer models, not the complexities about them, its just a motorcycle. I loved Harley-Davidson from the time I was 6yrs old, since 1965 nothing has changed I just appreciate the old school craftsmanship n still works too the day. Love your channel, thanks for what you do for us.
My God this is getting more stupid buy the year.
Definitely not impressed with my last couple of harley davidsons.
Hate to say it but it might be time to look at something else when this one is done.
We will miss your positive post….Doc
What a PITA - whoever designed that shouldn’t be working on road vehicles!
😆…..Doc
“that little thing right there” is the stupidest design by Harley Davidson for decades….just sayin
I don’t know, I was not a big fan of the rubber strap and hook in early Softtails…Doc
Thank you!
You're welcome…..Doc