I did a 360 on my career path and started CCNA scratching my head, now i finally passed it and am confident i can smash out CCNP in a more time efficient manner thanks to your course. Thanks alot jezza!
You are one of my best teacher who is teaching me CCNA. I realised that I can learn a new skill and get out from my poor manner. Jeremmy, I'm greeting you from Somalia 🇸🇴. May Allah reward you for what you are doing to the his creatures. Thank you, jeremmy again.
Well, you already know I am your biggest fan Jeremy. I'll start the CCNP course immediately after my CCNA exam next month. Thank you so much for always helping. I was a novice early this year in the IT Field, Networking area, now I know so much about computer Networking. I can't thank you enough Jeremy. Bigs up
I feel like this is a restaurant and I am eating lobster with filet mignon. This content is 10/10 and how lucky I am that I am just starting my CCNP journey and he’s doing this .
Your CCNA stuff played a key role into achieving my CCNA. Also, Don’t you worry that by the time you finish this course, Cisco would roll out a new CCNP? All the love Jeremy!
Just wanted to say I went ahead and followed this video step by step instructions and purchased the VIRL Images. This video is so well detailed, i can't wait to finally start labing now THANK YOU JEREMY !!!
Hello Jeremy, today I passed my CCNA, I used your courses to help add the extra bit I needed and it worked,thank you. I would like to know if this CCNP course is everything I need to know for the CCNP exam?
Jeremy, thank you for your help!! I just passed my CCNA on Saturday and your videos played helped reinforce all the material that I have been studying and then some. I am now hitting studying hard for my CCNP ENCOR/ENARSI, along with your videos that you are releasing…do you recommend other sources to compliment?
Hey Jeremy, Thanks for the great free content! I noticed the course playlist already have 4 videos including the unreleased ones. Do you have plans to give early access to the videos as you produce them on teachable like you did for the CCNA?
Passed the 301 on the 8th, I already passed the CCNA in 2015 and 2020 under the 120 and 125 objectives so the ENCOR next logical step. Feel like I'm treading water otherwise.
So I followed this video for the installation on my new Windows 11 laptop. It was failing to launch the VM. Every time it would give me an error about nested virtualization not supported on the platform. After some digging I found a lot of information about disabling V-Sphere due to it causing issues with VMWare but it was all geared towards windows 10. I finally figured out that there was a setting in Windows Security > Device Security > Core Isolation that was turned on called “memory integrity”. After turning that off I was able to launch the VM
Hey Jeremy, need to ask you, will your course be finished before June? I’m asking because I’d like to buy it if that’s the case since my CCNA is expiring in that month next year. Thanks.
Hey brother, I have suggestion about translating the CCNP course to Arabic, I can help translate them, if you're cool with that tell me. Thanks so much ^^ :D
It is disappointing when you realize that CML has no solution for Apple silicon. VMWare fusion cannot emulate the x86 architecture of CML's Ubuntu-based image on an Apple silicon ARM64 host device. Considering that CML is used for personal practice, as is even in the name, it is unfortunate that they don't offer a solution for a large chunk of the personal computer market. I hope they change this and offer CML as a Linux arm architecture in the future. For now, it looks like I'm not only buying software but a whole new piece of hardware as well if I want to run this.
I would recommend going through the CCNA course first (and ideally getting the CCNA cert). But I'm not sure exactly how much knowledge you currently have of networks!
If I have that "virtualize Intel VT-x/EPT or AMD-V/RVI" box selected my VMs wont run, just get a general error saying it failed to start, I can start the VM without the box checked but I get the virtualization is disabled error in CML when trying to start the devices. Anyone know of a way to fix this issue?
Could be just my system, or some version thing, or me not understanding the video. But I could not just double click the OVA, it tried to go thru the install with no link to the ISO file. I had to go into VMware->File Open->add the ova file and then point to the ISO file. After starting the VM install worked the first time out. Hope this helps someone else.
Hi Ivan! Nope, that isn't possible. The closest thing would be to recreate the topology and then copy-paste the device configs from Packet Tracer's devices to CML's devices, although you might have to edit the interface names (if the devices in packet tracer have different interface names than the ones in CML).
Hiya, hoping I can catch your attention here with a bizarre issue. On your CCNA Google Drive lab files, the folder only appears to go up to day 28 and it won't load any PT files beyond that point? Is this some weird bug with Google not loading in the rest of the files? Can't say I've seen this before as I've been studying and downloading each file?
It's not just you having this issue. Others have solved it by logging in to Google and viewing the drive and/or using a different browser. Try either/both of those and see if it helps!
I hate cisco with a passion.. I cant even buy their CML.. Every year I run into weird issues where it wont add the tax portion when i check out, I search forums to see I'm not alone and the issue is unaddressed.. Yet another year when this trash company cant even manage to have their site function.. I'm sick of opening support cases at work, only to come home and need to open YET ANOTHER support case just to train on their equipment... I will no longer support cisco, I will make it my lifes purpose to redirect company purchase decisions away form cisco products because they are literally making me go insane..
Passed my CCNA yesterday solely from your course alone. No boson no nothing. Just your course. Thank you Jeremy.
Hi jeremy i m now working for CCNP so it s à good gift what u are giving to us thx a million and good bless u
Thanks Majid! Good luck on the CCNP :)
I did a 360 on my career path and started CCNA scratching my head,
now i finally passed it and am confident i can smash out CCNP in a more time efficient manner thanks to your course.
Thanks alot jezza!
You are one of my best teacher who is teaching me CCNA. I realised that I can learn a new skill and get out from my poor manner.
Jeremmy, I'm greeting you from Somalia 🇸🇴.
May Allah reward you for what you are doing to the his creatures.
Thank you, jeremmy again.
Thank you for your kind words. Good luck! 🇸🇴
Well, you already know I am your biggest fan Jeremy. I'll start the CCNP course immediately after my CCNA exam next month. Thank you so much for always helping. I was a novice early this year in the IT Field, Networking area, now I know so much about computer Networking. I can't thank you enough Jeremy. Bigs up
Thank you my friend! And good luck on the CCNA 👍
I feel so confident after watching these videos. You have great ability at presenting the material.
Thanks, Rex :) Glad to hear it!
Thank you so much , i’ve been waiting for you to start the CCNP course , all your efforts are highly appreciated ❤️❤️
Thanks so much :)
I feel like this is a restaurant and I am eating lobster with filet mignon. This content is 10/10 and how lucky I am that I am just starting my CCNP journey and he’s doing this .
Glad to hear that ;) I hope you enjoy your dinner!
Your CCNA stuff played a key role into achieving my CCNA. Also, Don’t you worry that by the time you finish this course, Cisco would roll out a new CCNP? All the love Jeremy!
Congrats on the pass! If they update the exams I’ll just add/remove videos as needed to match the new syllabus, so no worries here.
Just wanted to say I went ahead and followed this video step by step instructions and purchased the VIRL Images. This video is so well detailed, i can't wait to finally start labing now THANK YOU JEREMY !!!
So far, you are the best on UA-cam I am not from IT genre. From a business background. Want to shift on networking. Your channel is helping me a lot
Thank you Mohammad :) I hope the ENCOR course will be helpful too!
@@JeremysITLab ❤
I NEEDED this! Can't wait to start studying for CCNP! Been looking forward to this course since taking your CCNA course! Keep up the amazing work!
Congrats on the CCNA! I hope the ENCOR course is helpful ;)
@@JeremysITLab thank you man! Felt so good attaining that CCNA! Take care!
@@JeremysITLab hey Jeremy is there any way we can buy the slides you use for the CCNP course ?
@@mazenlatif6722 Just take notes. That is the best way. You'll remember more for certain if you write things down. This has been proven!
CCNP course from Jeremey is like my new year gift, Bless you Jeremy
Thank you :)
I feel like you are going to revolutionize the CCNA world 🌎.
i passed my ccna ,now time to take ccnp it's really awsome🤩
Thank you Jeremy for helping us develop. You are true hero :)
Thank you, Burak :)
Keep it up Jeremy! I'm starting doing a CCNA Course next week! I'll start CCNP as soon as possible. Thank you for your material!
This is really amazing. Am already enjoying the smooth and clear explanations.
Hello Jeremy, thank you for this content. As always your videos have a tone of relevant information.
Thanks for your support, Amos! :)
Thanks, I was able to adapt this video to get it installed on ESXI. CCNP here we go :-)
I am from Pakistan the best instructor you are sir!
I kinda missed this amazing voice, waiting for more videos, thank you for your effort and wishing all best😅
Hello Jeremy, today I passed my CCNA, I used your courses to help add the extra bit I needed and it worked,thank you. I would like to know if this CCNP course is everything I need to know for the CCNP exam?
Thank you so much Jeremy for the amazing instructions!
Thanks, Boyan :)
HI Jeremy. Thanks for another successful course, I do have virtual machine installed in my computer, I can use it to install CML
Love the new intro clip!
Thanks, I'm glad you like it :)
Jeremy, thank you for your help!! I just passed my CCNA on Saturday and your videos played helped reinforce all the material that I have been studying and then some. I am now hitting studying hard for my CCNP ENCOR/ENARSI, along with your videos that you are releasing…do you recommend other sources to compliment?
Awesome...waiting for 3rd!
i love the way you explain the lesson, can you make a ccnp data center for the next lesson?
Thank You so much jeramy, am waiting for your new video. ❤
Thanks for watching :)
Please upload regularly ❤️
I'll do my best ;)
@@JeremysITLab If there are 60-70 videos in CCNP, then I can complete CCNP in 2022, and start new career in 2023 🥰✨.
Great video!
Thank you so much Jeremy
Thanks for watching :)
Thank you Jeremy
Hey Jeremy,
Thanks for the great free content!
I noticed the course playlist already have 4 videos including the unreleased ones.
Do you have plans to give early access to the videos as you produce them on teachable like you did for the CCNA?
Yep! The course is already up on Teachable, I will upload them there about 2x per week (depending on how quickly I make them)
Great news! Just enrolled!
Tks!
Thank you, well explained
Thanks :)
Passed the 301 on the 8th, I already passed the CCNA in 2015 and 2020 under the 120 and 125 objectives so the ENCOR next logical step. Feel like I'm treading water otherwise.
Very clear video institutions. New sub here 👍👍
So I followed this video for the installation on my new Windows 11 laptop. It was failing to launch the VM. Every time it would give me an error about nested virtualization not supported on the platform. After some digging I found a lot of information about disabling V-Sphere due to it causing issues with VMWare but it was all geared towards windows 10. I finally figured out that there was a setting in Windows Security > Device Security > Core Isolation that was turned on called “memory integrity”. After turning that off I was able to launch the VM
This worked for me as well. I discovered this before reading your comment. Just confirming to help others as well.
That’s a great video. Thanks.
Is the vm ware still working ? if not what could be the alternative solution
Hey Jeremy, need to ask you, will your course be finished before June? I’m asking because I’d like to buy it if that’s the case since my CCNA is expiring in that month next year. Thanks.
Thanks!
Thanks for the tip, Peter! I appreciate it :)
Hey brother, I have suggestion about translating the CCNP course to Arabic, I can help translate them, if you're cool with that tell me. Thanks so much ^^ :D
thank you for your best cours
Thanks ❤️
Thanks for watching :)
Hi Jeremey not sure why but im able to access the CML UI after putting the ip address on a browser
outstanding
Thanks Mo :)
It is disappointing when you realize that CML has no solution for Apple silicon. VMWare fusion cannot emulate the x86 architecture of CML's Ubuntu-based image on an Apple silicon ARM64 host device. Considering that CML is used for personal practice, as is even in the name, it is unfortunate that they don't offer a solution for a large chunk of the personal computer market. I hope they change this and offer CML as a Linux arm architecture in the future. For now, it looks like I'm not only buying software but a whole new piece of hardware as well if I want to run this.
Great
Thank you :)
Hi Jeremy , Can we use parallels desktop instead of VMware Fusion for CML?
I am not CCNA certified, but have basic understanding of networking, although not at CCNA level. Is it a good idea to start from CCNP?
I would recommend going through the CCNA course first (and ideally getting the CCNA cert). But I'm not sure exactly how much knowledge you currently have of networks!
How long did it take for the license to register for you ? Im having a hard time with it, posted on the cisco forums havent heard anything yet ..
Best!!
Thank you, Mateo!
Thank u dear sir❤
Thank you! :)
can any help me where i can get jeremy lab configurations for gns3
If I have that "virtualize Intel VT-x/EPT or AMD-V/RVI" box selected my VMs wont run, just get a general error saying it failed to start, I can start the VM without the box checked but I get the virtualization is disabled error in CML when trying to start the devices. Anyone know of a way to fix this issue?
is this course complete now with 34 videos? or are there still topics to be uploaded?
thanks much
Hello can I use virtual box to install CML
Hi Jer do you have course in Udemy in CCNP encore?
Nope!
💥💥🔥
🔥🔥🔥
Sir can I learn ccnp just after passing ccna exam without having any experience.
Yes you can! That’s what I did
Could be just my system, or some version thing, or me not understanding the video. But I could not just double click the OVA, it tried to go thru the install with no link to the ISO file. I had to go into VMware->File Open->add the ova file and then point to the ISO file. After starting the VM install worked the first time out. Hope this helps someone else.
lifesaver
just a side note, you may have to check the box "Connect at power on" in the same are as selecting the iso. good luck everyone :)
I don't have enough money to buy it. Is eve-ng okay? Or do you have any other suggestions we can use?
Check the first video of the course, I address this point
Hello! Do you know if it is even possible to import Packet Tracer Lab files in CML? Any way of converting may be?
Hi Ivan! Nope, that isn't possible. The closest thing would be to recreate the topology and then copy-paste the device configs from Packet Tracer's devices to CML's devices, although you might have to edit the interface names (if the devices in packet tracer have different interface names than the ones in CML).
Thank You Jeremy❤️
Thanks for watching :)
Is the smart license is free ?
Nope, it's $200/year for the Personal license.
Hello thanks by information. You may be test the PNetLab?
my ccna certification expired, so, now i am working or prep too ccnp. I found alternative solution with PNetLab.
PNetLab works, but for most people CML is the only legal option. I don't want to recommend anything illegal on my channel.
@@JeremysITLab That's right, I mention it for those who have legal images of their devices. But according to your recommendation.👍
Hi jeremy, Is it still possible to install on the mac m1?
On Mac you should be able to run it on VMware Fusion.
i would like to become a member!
So this can be used in Linux too right?
Yep, Linux can run VMware workstation
How can i have CCNP Lab from you ?
Can we use CML on DevNet sandbox ?it's for free
Hiya, hoping I can catch your attention here with a bizarre issue. On your CCNA Google Drive lab files, the folder only appears to go up to day 28 and it won't load any PT files beyond that point? Is this some weird bug with Google not loading in the rest of the files? Can't say I've seen this before as I've been studying and downloading each file?
It's not just you having this issue. Others have solved it by logging in to Google and viewing the drive and/or using a different browser. Try either/both of those and see if it helps!
Can I just use Microsoft Paint as the emulation software?
Yes, of course 💯
Its better just to run it in aws in my opinion. Costs less than more ram
First
Thanks for your support, Owad!
Sir can I learn ccnp just after passing ccna exam even I have no experience
@@AbdulMannan-oh1eg Yes of course!
CML is way too expensive :((((((((((
❤❤ 🇵🇰 🇵🇰
I hate cisco with a passion.. I cant even buy their CML.. Every year I run into weird issues where it wont add the tax portion when i check out, I search forums to see I'm not alone and the issue is unaddressed.. Yet another year when this trash company cant even manage to have their site function.. I'm sick of opening support cases at work, only to come home and need to open YET ANOTHER support case just to train on their equipment... I will no longer support cisco, I will make it my lifes purpose to redirect company purchase decisions away form cisco products because they are literally making me go insane..
Thank you Jeremy
Thanks for watching :)