VF750C Honda Magna regulator/rectifier check and replacement. Also continuity check of stator.

Поділитися
Вставка
  • Опубліковано 21 гру 2024

КОМЕНТАРІ • 21

  • @branhub
    @branhub Рік тому +1

    98' Magna and you confirmed my research. Thanks for the video man.

  • @barmaley1982
    @barmaley1982 4 місяці тому

    Thanks, I am smelling rotten eggs from under my seat right now. This is helpful.

  • @ogonzilla
    @ogonzilla 5 років тому +2

    very helpful thanks!!

  • @francisbaker8590
    @francisbaker8590 4 роки тому +3

    Thank you for this video. I have an '88 magna and just got that rotten egg smell.

  • @MannyMarvelous
    @MannyMarvelous 5 років тому +2

    that's a clean magna!!

  • @weddo3
    @weddo3 2 роки тому

    I really wish you had a video of the removal and replacement of the stator. I need to change mine but dont want to wing it on the parts to remove in order to replace it

    • @darinparest
      @darinparest  2 роки тому +1

      Sorry brother..I don't have the bike anymore. Look for a manual it'll give you a step by step solution. Good luck.

  • @weddo3
    @weddo3 2 роки тому

    you say to download the manual but where do I find that? I have a 96 Magna vf750

  • @khada3308
    @khada3308 2 роки тому

    Hey buddy got me a 99 vf750cx magna lost the keys and trying to get the ignition out to check for a key code, and having a h3ll of a time getting it off, any tips? Trying not to buy a new one for 150 when all i did was lose they keys. Hmu buddy ty

  • @MrYukon04
    @MrYukon04 4 роки тому +1

    How did you get it out

    • @darinparest
      @darinparest  4 роки тому

      Take your time it's very difficult. After loosening it with an open end wrench I used my fingers and a magnet. You'll have to be an acrobat.

    • @MrYukon04
      @MrYukon04 4 роки тому +1

      @@darinparest that was rusted so had to pull the whole damn box out. But I got the old one cut off and putting the new one on right now lol

    • @cynthiareadinger7281
      @cynthiareadinger7281 4 роки тому

      This is my question, having a hell of a time trying to remove it!! Hoping putting it back in won't be worse!!!

    • @darinparest
      @darinparest  4 роки тому +1

      @@cynthiareadinger7281 you might have to turn the nut 1/4 turn at a time. Also, use an extendable magnet to make things a little easier. Hope this helps.

  • @PaulBraman-t1h
    @PaulBraman-t1h 5 місяців тому

    Thanks!!!!

  • @modesttea7133
    @modesttea7133 2 роки тому

    I got a 95 and I just put a new stator, voltage regulator, and battery in and it won’t charge

    • @darinparest
      @darinparest  2 роки тому

      You might have an in depth electrical problem that a Honda tech might have to check. I wouldn't dive too deep into it myself. Hope you get it going.

    • @darinparest
      @darinparest  2 роки тому

      Check all fuses and grounds also.

  • @martyflint3849
    @martyflint3849 3 роки тому +1

    Mine went to 19.5 v dc