Thanks for watching! You can support my work here: www.buymeacoffee.com/ratechyt discord.gg/PFb9cMstZH ▪ instagram.com/ratechyt ▪ twitter.com/ratechyt ▪ facebook.com/ratechyt
My little son use my old Pc. Board: ASROCK 970 PRO 3 Processor: FX 8350 Eightcore Processor Graphiccard: Nvidia GeForce GTX 960 Ram: 4x 4GB Crutical (16GB) Power: 820W Xilence - Works good Today for much games like World of Tanks, Strandet Deep, Much Singleplayer Games or Stuff like this. - For Games like GTA 5, Pubg, Battlefield and stuff like this, is it not Playable
Good old times and memories, still own my FX 8350 and Formula V Z board with 32GB RAM at 2400MTs and OC at 5.2GHz at 1.55 V xD Still runs, havent had a single FX die on me, more mainboards being on the deathbed. Man I miss my FX :D
Isn't 1.55v a bit too much? I believe that the recommended maximum safe voltage is around 1.4-1.45v. Lowering clocks to 4.9-5.0Ghz won't affect the performance that much.
This video makes me smile, I was actually watching your video last week about the FX overclock and wondered if your old FX machine was still in use like mine is! I have my 8370 running at 4.7GHz as well at 1.5v with the RAM overclocked to 2133MHz (Ram thanks to your guide actually) and yeah... still enjoying my FX system a lot. I wish back in the day games used all those cores and that AMD hadn't allowed board manufacturers to offer users poor boards that couldn't handle the chips... Mine is paired with a Sabertooth 990FX R2 and it's very enjoyable.
Bro.... you've given me hope with my 8370.... And yeah even without overclocking it still runs games pretty decent. not to mention all the older games I have. Maybe I can squeeze a little more life out of it. Death Stranding is killing me at points, although that's more like a GPU problem I feel
@@Outwars1 hell yeah, the 8370 are the same bin as the 9xxx chips so it should push pretty high if your motherboard can handle it. I love this thing. Death Standing should run fine with your FX, it ran well for me on my 8370 @ stock paired with a 1060
I had a 9590 on Sabertooth 990FX R2.0 with an Alphacool 480mm x 60mm and custom chipset and vrm waterblocks. I should put the old beast back together and tinker with it again. It was too much fun. Also had an 8350 that would do around 4.8GHz, and several 6300/6350's that would do 4.95GHz with a good air cooler. Now that I know how to OC RAM properly, I bet I can squeeze even more out of em. 🤔
I pulled an FX 8300 out of a dead HP machine, the die being diffused in late 2015 it was the cherry to end all cherries. Pulls about 40% less power than an old FX9590 we had to hold the same base 4.85GHZ stably; 1.275v versus 1.465v... and it was actually a lot faster in games as the FX8300 had a much much better memory controller, NT/HT/DDR3/2600 24 hour memtest stable. But that's the silver lining when you make the exact same chip for almost 4 YEARS. lol. Gloflo had their 32nm honed in like mad by the end. It still games really good thanks to 8 threads too, but would never recommend one as anything as a curio, old higher end motherboards and decent DDR3 are a ripoff on the used market, and even first gen ryzen 1600 with a cheapo B350 would gap it good for a tiny fraction of the price.
@@SwattiiI’m still using it 😢 I didn’t know about computers at all so I got it late 2013, then early 2015 I went ahead and paired it with a 3440x1440 monitor and a 980ti. That still my setup, im about to upgrade soon but I think over the years what has carried that atrocious build was the 980ti
FX Rigs are still good computers. Of course for gaming, I need a lot more than what it can offer me but my wife is using one I built for her a few years ago and it's stable. She has never complained about anything. 😄
Tbh, it is still perfectly usable. During the shortage, I had to quickly find a replacement board for my wife's PC, so I gutted by seed box, and here you go, FX-8350 b\w 16 gigs of random DDR3-1066 and idiotically paired with RTX 2060 Super. It handled Hogwarts Legacy just fine on 1080p with DLSS Quality and overall medium settings preset, hovering around 45 to 50 FPS, with decent frametimes. As you can imagine, apart from Last of Us and Redfall, it still can handle pretty much anything rather decently. It is time to upgrade, no questions here, but this combo was great when I bought it, and continues to help me out over TEN FRICKING YEARS LATER.
I put an FX8350 build together, was fairly impressed with it, first I had it paired with a 1050 ti then a 1650, gaming performance was good, got lots of gameplay vids on my channel from that build
I still have 2 AM3+ systems for older family members (email, surfing net etc) with FX4100/4300 (8GB ram/ssd/7770s). I wouldn't mind upgrading them with FX 8320/8350 but people asking 50-60 euros for these ancient cpus. Buying used A320 mobos and Ryzen apus to retire em makes more sense.
Yeah, especially that FX 8000 CPUs are very power hungry and need high-end motherboards to function properly. People buying FX 4000 rarely buy expensive motherboards with them.
if your motherboard has 8pin cpu power connector fx8120 and up are fine but if your motherboard only has 4 pin power... i wouldn't do it even if it says its supported. Rip my msi 890gx and crap psu
I currently hold all the records bar one on 3DMark benchmarks on air cooling with my FX8350 with my 8GB RX580 and it has been huge fun overclocking and still able to play most games with FSR enabled aswell still.
Im about to retire my RX 580 8gb and throw a RX 6600 in my FX 8350 AM3+ rig. Going strong, 10 years later. Out of all of the PC builds I did over the years, the FX 8350 has given me the most mileage for 50 - 80 fps and 1080p - 1440p gaming. I upgraded to Ryzen 1600 in 2017 because I had upgrade fever and then swapped out to a Ryzen 3600 that I currently drive as my main. I still keep my FX 8350 AM3+ build around because it just performs brillaintly for what it is, and all these years later, it still gets very playable performance across a very broad range of titles and many modern titles.
Reason old cpu now performance more is thanks to directx 12. Real directx 12 games use more cores. Well old directx 11 and lower (directx 11 Hybrid 12) Have all the same problem. It use the 1ste core for a lot of things and the rest do nothing really. That is the reason intel.i-serie have a good performance in that time. Test it today and intel well not have that extra singel core performance boost in games.
That's what I'm saying! After playing Warzone 2.0 I realized that the performance in the first Warzone wasn't so bad, even with those dips below fifties.
I would love to see how FX8350 age compared to Sandy Bridge or Ivy Bridge 4/4 and 4/8. Anyway, amazing retro-review! The bottleneck is WAY less than expected. Sometimes only 20~30% on ultra settings depending on game. Really low. We hame something very similar on some modern 6/12 like Ryzen 1600 or even better CPU using 6600XT alike cards. The biggest bottleneck mainly in heavy cpu demanding game.
@@rodrigomendes3327 Haswell is only 21% faster then Sandy bridge, but ofc back then 20% was a huge jump compared to the 1% jump in Sandy vs Ivy the generation before.
@@budgetking2591 20% faster is a HUGE difference. Absolutely HUGE difference. And it's not only 20% better than Sandy Bridge, is something close to 30%. It's 20% better than Ivy Bridge. I had all of them. Including FX8300 Series.
I tested a 1090T and also compared it to an FX-8350 & FX-6300 about 4 years ago. Video quality has definitely come a long way since then, but you can still check them out on my channel if you're interested.
Still using a FX8350 running at 4.72ghz with a RX580 Red Devil Gold edition for my daughters rig. I upgraded my main to a 2700x & then to a 5900x but for the games my daughter plays the FX is still killing it. Dead by daylight, fortnite, killing floor 2. Cpu is a beast. have a second FX-8350 is brand new in the box. When I built the system I didnt want any rgb, all fans and cooler are black with red led's inside a corsair vengeance ammo box case with a custom made clear side panel. Keep up the tops vids mate :) looking forward to 2024 Fx still killing it :)
I have been using fx 8300 4.3-4.5@ghz for 6-7 years, I was so happy, it was so cheap and even cheaper than intel pentium g3258 in that time. While everybody said that even pentium better for gaming, I knew it wont last long with just overclockable 2 cores. Now I have a temporary i5 6600, even tho it is much better on emulation or old singe threaded games, I have experienced some inconsistency that I never experienced with my old fx build. Like my i5 6600 can not load forza horizon 5 map while travel roads become blank, and it is even worse on at hot wheels expansion, in uncharted some scenes pauses my game to load assets this happened 7 times in a row takes more than 15 minutes total and nearly always %100 usage on games even with a clean debloated windows :( I have never experinced these things with my old fx before with same games.
I am still using it. Intensive lightroom and Photoshop use. Recently I was stacking 125 photos and made 37 minutes to finish. Then I realised that it's time for an upgrade. My most trustworthy pc will finally rest.
I recently upgraded from my trusty FX8350 to a 7 7700X. The difference is MASSIVE! However, my FX is and will always be my favourite CPU as it was part of the first build I ever did and thus it will stay in its original box on my shelf forever. I overclocked it and played games like BF1 and BFV with it. Sure, framerates were low and temperatures high - but it did everything I could have ever asked for. I just upgraded because the rest of the system had been in use since 2013 so I didn't quite trust the hardware to work at all times (need my PC for work).
i'll be going into 2024 with.. a fx8350 system Which IS and upgrade from the phenom 2 in which its replaced. runs doom eternal fine runs cyber punk....and world of tanks just fine mission accomplished.
Why 4.7 and not 5G with NB OC and better RAM? Really "max out" what this baby will do maybe? Just some thoughts, no hate. I still have my ol FX, I got lucky and snagged a FX 9590 for cheap, i just need a better Mobo and RAM, that crap is pricey$$$ these days. lol
5 GHz would probably require 1.6v with my FX-8350 - all that extra heat and power consumption just isn't worth it for 3-5 more FPS. NB and RAM were also maxed out, going any further makes the PC unstable.
@@RATechYT Oh yes i understand. I skipped the first part of the video when you discussed that, i just went to the meat of the vid, that's on me so nvm. :)
Your channel the only reason I kept my FX-8350 till January 2023, got gifted a new motherboard with Ryzen cpu and swapped them. But I hanged the motherboard with the FX on the wall.
I still daily drive a fx-8150 on an Asus sabertooth 990fx the original self-contained AIO that they had for these boards, 32 GB of DDR3 and 4 one tb 2.5 ssds.... Running 3 monitors on a GTX 1650 super. Everything but the GTX and 16GB of the ram is from 2014. The system was given to me a year ago and I use it for music production and basic blender director as well as the streaming and all the other daily Business. Awesome play Halo rather well and also Forza 5 I was getting like 80 frames on mostly high settings to my 1080 43 in, and I still had the other 32's running basic metrics in the background.
@@shyfawxproductions bought the Asus b550m tuf bluetooth II and the 5700x to go with it. suuuper exited since I'm upgrading from the fx8350 + fxa990 ud3
I had an FX 8320 that I used for years. It came clocked at 3.5Ghz, but I was able to get up to 4.3Ghz. It was a very capable CPU, especially in the early days. I planned on holding on to it when I built a new PC, maybe in 2018, which I did for a while. But I had a friend, who like me, isn't wealthy enough to just go buy whatever and he was going to try and build himself a PC. So, since I had to get a new board, new ram and so on for my build, I gave him the CPU, MB and 64gb DDR 3 ram. So that CPU is still out there and doing its thing. I really liked the CPU.
I still use my FX 8320. This thing compiled as fast as an intel chip at twice the price at the time. And the mainboards were 50-100 dollars cheaper, because they still use a north bridge. Because of the great multicore performance, and modern games targeting 8 core processors, it holds up increadibly well overall
I've never seen more vitriol towards a processor in my life than the FX 8350. I don't understand where all the hate and bias came from. I tried being reasonable on forums by posting this Tek Syndicate video ua-cam.com/video/eu8Sekdb-IE/v-deo.html but everyone kept saying that Tek Syndicate was lying and paid off by AMD. I remember the 3570K and the FX 8350 were both around $200 when they came out and shortly after the FX 8350 dropped to $170 and then after about a year could be found for $150 easily whereas the 3570K remained locked at $200. I remember the FX 8350 would always be very close the to 3570K for gaming and then destroy it with video encoding/decoding. Then the argument became that the $300 3770K did video encoding/decoding just as good and sometimes better even though it was twice the price. At the end of the FX lineup's run I ended up picking up a deal at Microcenter for an FX 8320e with a free motherboard for $90 and built a computer for my in-laws that they still use to this day. I was so impressed with it that I ended up building another one with the same deal for myself that I left at my buddies house for LAN gaming (Payday, Killing Floor, Borderlands 2, Overwatch). I ended up giving that PC to my nephew recently that he's using for his small business and he's happy with it.
I had an FX 6300 with an R9 270x back in their days and i was able to play anything in 1080p just fine back then. I think people gave the FX too much hate than it deserved cause back then it did have many cores but there were no games to actually use them,and right now they do use them but it's still slow because it's old arhitecture. If you'd try a 2nd gen or 3rd gen i5 which are as old as the FX they won't do that much better either in modern games
Old games such as Crysis 3 (2013), Battlefield 4 (2013), Witcher 3 (2015), Division (2016) and many more also performed better on 8 FX cores compared to similarly priced quad core i5's! I demonstrate that in the i5-3470 vs FX-8350 comparison - ua-cam.com/video/qCFeWb4skhE/v-deo.html
Maybe back then when it was new the thing had problems, but when your in a category like me where new tech is out of your reach so your always behind, well it's amazing. I just got one with an ASUS MSA99FX PRO R2.0 Motherboard , 16GB memory with an RX580 and I love it . I went from having an A8 processor to this FX8350 and not only does it perform way better then I could of imagined, but every game I play makes the A8 look like a snail . I'm even using a Toshiba mechanical HD and everything runs smooth as butter and I was surprised I can now run games on it with much higher settings . One of the things I did was change the default settings on the MB and I think a lot of people make that same mistake and never change it or tweak anything, oh and no over clocking needed . Also I have never been a fan of apps that test your system, because I don't care how good they claim to be it just can't compare to a real world test with real games where you can adjust and change the settings. Remember also you can run higher settings, but just turn off some stuff , like motion blur , particle effects , turn down shadows and some other settings. With older hardware you just can't do Apple's to Apple's and I will never understand why no one makes a video about that, because when you play a game in the real world with limited specs your going to adjust for better performance and over time you find out exactly what makes your system run the best. This is a good video , but not realistic in terms of what someone would really do . Gotta also remember when the 8350 come out some PC settings didn't even exist yet so this is why you should turn off certain settings, so maybe make a video about that.
I agree I had the FX 8350 and FX 9590 for 5 years it did everything I asked a computer to do with no complaints. I even did crossfire with 2 rx380's for a while then, I got the rx 480 Sapphire Nitro+ OC edition. I even put a water cooler on it when I water cooled my FX 9590. So many good memories gaming back then, could you play Crysis? That was gaming.
CHANGE THE PSU FSP Hydro are fine for simple PC builds but FX need high quality PSU. I am FX veteran. My mobo was a Gigabyte 990FXA-UD3 R5 and the exact same HyperX 1866 RAM you have. I managed to get a cheap FX-8320E to 4.6GHz 1.5V (medium LLC) Later I got a FX-9590 for dirt cheap which I OC to 4.9GHz all core with the same heatsink and 1.53V My PSU was a EVGA Supernova G3 750W (that still rocking). I think you could get much better OC by using a good PSU. Try to check the 12V line while running a bench with the FX. I am sure the voltage will drop significantly and god know how bad ripple is.
I still have my FX 8350 with a Motherboard UD5 from Gigabyte and 32 GB of RAM, is my server now with my old graphics card RX 560 4 GB, I use now with proxmox and with some containers and VMs and still is a little beast, but for my needs and workflow is a little weak to handle all my homelab for his own, I'm thinking to replace it, but give it to my parents where can be used for more years :D
I still have an Fx8120 overclocked to 4.2Ghz 1.3625v Medium LLC with a GTX 660 ti with 16GB of ram. I did leave the power save settings on because the system becomes too much of a power hog when stressed. I don't mind benchmarks taking a 15% hit with the settings off. System still feels moderately snappy and runs games pre ps5 era very well. The thing is, you don't want to couple this with anything more than an RX 480 because you will get bottlenecked hard, especially in newer games for consoles that rely on zen2 cpu horsepower.
Nice to see someone who knows what he`s talking about, i`m just sick to see puppets on you tube talking about ``fake`` 8 cores or ``horrible`` performace of FX cpu`s while they where ok, yes Intel had top hand but these where cheaper as where mobo`s for them, i whent from 4300, 6300 to 8350 and i was satisfied with them all, now i run on r7 4750 but looking for some good 6300 with mobo deal to buy it and put together some mean retro machine with my old beautiful Powercolor R7 370.
Thanx for this video! Highly interesting. I just bought one (used of course) for 75,- to make a last upgrade on a PC-studio-machine from 2011 with a GigaByte AM3+-Board. I did not install it as of yet, but the former CPU was a Phenom II X4 965 Black Edition, so I think it will make a lot of sense. Main task on this DAW-machine is audio / music-production and some midrange game-design in GameGuru Max. In Germany the FX-series was not hated in reviews, quite the contrary. It was always well respected. The reason that back then I put a Phenom II X4 into the PC was the fact that the FX-design shared 1 FPC with 2 cores. The Phenom has 1 FPU per CPU how it should be. FPUs are very important in audio-processing... So now with 8 integer-cores and 4 FPUs it should clearly surpass the Phenom II.
Just upgraded to a ryzen 7 7700 from this. The FX were awesome but ran very, very hot. I almost fried mine with a stock cooler before switching to liquid. Got almost 8 years out of it.
I have FX 8350 config and still working fine in 2023 ! But need to use very good motherboard, very important ! My config Motherboard : ASUS Crosshair V Formula-Z ( Best AM3+ motherboard ever ! ) CPU: FX 8350 BE Black Edition RAM: 4x8GB Kingston Hyperx Fury 1866MHz CL11 VGA: Asus Geforce rtx 2080 ti OC 11GB Power Supply: Coller Master 750W 80+ Gold full modular ( very important to use Power Supply ) SSD : Samsung 860 EVO 250GB + 2TB WD Blue 7200RPM HDD This config is not the cheapest but very good ! In GTA 5 more then 100+ FPS ;)
I still rock an 8350 in a crosshair v, 32 gb ddr3 1600 and rx 580 in a windows 7 build just for certain games. Especially older bethesda titles, they do not play well with Win10 or 11.
You are right! Guess what: i'm still using an FX 6100 actually overclocked at 3.9Ghz but i had it overclocked at 5Ghz for fun & guess what: it runs MotoGP 22 on Ultra, 2160p with 60FPS, no drops & only 40% to 50% CPU usage. ua-cam.com/video/dcPWCcWbsSE/v-deo.html I'm still using it & i'm very happy with its performance.
dude i dont care what they say i enjoy this chip for a long long time 6 years to be exact was cheap push 70+ fps in that time when monitor wherent that crazy , it warm the room in winter and it was a sauna in summer give the AC a run for his money.... damn this video have a lost a nostalgia a bloody zalman fan
i'm still running mine as a "media machine" set-up (never oc'd, original hardware 16gig of ram, gigabyte board, but replaced the old spinner hard-drive with an ssd and using a noctua air-cooler). works fantastic, can have 3 to 6 movie/tv episode downloads going while watching a movie or youtube and browsing ebay and stuff all at the same time no problems :)
An FX-8350 for $80, why would anybody buy it at that price? Upgrades. For people with AM3+ sockets with older processors like FX-41xx and FX-61xx looking for a nice upgrade on the cheap.
@@Prizzim AMD Phenom II X6 1055T is about as good as it is going to get on that platform. Make sure your motherboard supports it, as I believe this processor consumed a lot more power than the lesser AM3 processors. At this age and scarcity of product, the CPU is likely to cost more than it might be worth for likely to get out of it. If you're rocking a Sempron or something like that and only have like $120 or whatever to spend, then this will be a considerable upgrade. However considering its advanced age, you might think about if upgrading to some other slightly used platform is in your budget. This is at the end of what I'd consider being a worthwhile upgrade, and I suspect many people would consider it not worth it at this point.
phenom II was just Down right Faithful.. just a Solid Good Cpu line up..all the ones iv had .. (secret phenom renamed to athlon. 7750 an athlon with 2mb of l3 cache) phenom 9660,phenom2 720 phenom 2 555(unlocked to b55) hitting 3.7ghz on air all day. phenom2 960t, phenom 2 1045t,phenom 2 965
I just sold my old FX-8350 to someone a few months ago. I had to check twice to make sure they knew what they were buying because they said they were building a system and all I could think is "who builds and FX system in 2023?"
Still using an 9590fx at 4.9ghz 1.46V, I only play a few games where the fx still delivering good performance with an 6700xt in 4k 120hz. I am thinking to upgrade mostly for lightroom as it start to show the age now, but 10 years is a great result for this little "failure", and I love it
I need to go back and test my stock FX 8350, but the last three test I did with Company of Heroes 3, Dead Space Remastered, and Last of Us using a RTX 2070 Super, things did not go well on Dead Space and Last of Us. Last of Us had some terrible cpu utilization going on, which affected even the i7 6700K I have here. Since a number of patches though, last time I tested Last of Us over the weekend on the i7 it ran really well, so my hope would be that things improved for the FX also at least enough so you could run the game at a steady framelocked 30fps. Dead Space though I am not sure if they have patched it at all since the last time I tested it. In game gameplay was fairly ok, but the opening story scene with the video message from Nicole was a slide show. It came off as buggy and something the FX just could not brute force its way past regardless of clock speed. I also got weird issues when trying to just start the game from save points where I would have to restart the game sometimes. The game already had issues on a Ryzen 3600, but not the kind where I had to struggle to get into the game. Which basically sums up my fears for this cpu in 2023, that a lot of new games getting released, as buggy as they are, the FX wont be able to brute force them on launch day, and people will get stuck sitting around waiting for a couple months worth of patches to get the game optimized. I don't even want to know what Jedi Survivor performs like on it right now. The plus side though is Company of Heroes 3 ran extremely well. You can bank on a 50-60fps average with a mix of medium/high settings. Relic is pretty much one of those developers you can count on to put out something that works well on day 1 though.
The cyberpunk results are a bit strange. I ran through the whole game at locked 30, with a fx-8320 at 4,2 ghz. Streaming issues could occur at high speed, GPU related though. Just to be sure I don't talk out of my ass I went to the exact location in your video and yeah, 38 fps. Nothing consistently below 30 over the span of the 3 last patches Ah yeah, forgot to add, my results are with medium/high settings 🙃 Edit2: ah, it's because you are recording!
Brings me back to my previous setup which i upgraded a few hours ago. fx-8350 & 4x8gb ram & 660ti gtx. Unfortunately the cpu (fx8350) started overheating until it eventually died out.
Finally you're back brother. BTW I have fx8300@4.8ghz. 1.45v to 1.47v. Ram 1866 NB 2600 Hyper link 2400 Asus 970 aura pro gaming, with a beast vrm, What do you think about my overclock. Nzxt 240mm liquid cooler
Great video! It's hard to believe that everything is still going so well. A few days ago I found a Fatal1ty 990FX Killer motherboard with AMD FX8350 on the street. And guess what? It works ! I'm building a retro system from 2012. The hardware still costs quite a bit and I saved the money.😁
Back in the day i had a fx 8350 and a gtx 770. It was my first computer that could actually play most games, so many hours of tf2, counterstrike and gta 5 were played on those parts.
Hmm interesting. How to do this in bios? Can you post benchmarks of the difference? I tried mine with ASUS Core Unlock and it still shows 4 core 8 threads in Win 10 😢
Still have the FX 6100 black edition & it runs very demanding modern games at 1080p, 2K & 4K ultra / very high / high settings, 60FPS even now in 2023. It has never dissapointed me.
I'm still upgrading mine. FX 8350, 16gb DDR3 2133, Asus 990X mobo. I need a new GPU for it tho. Been using a 470 4gb but I want to get an RX 480/580 8gb for it and an FX mobo. Also 32gb of DDR3 2400. My chip runs 4.7 on a Cryorig H7 but there's headroom if I can lower temps so I'm going to need a 360mm aio for that CPU to get 5ghz all core.
Ran my fx8350 for almost exactly 8 years. (January 2013 to December 2020). I never had any complaints with the cpu. Paired with 16gb ddr 1866mhz memory, 2 sata ssds (1os + 1 games), and a radeon 7970 I always had good experience with the pc. 95% of all games I played could still achieve 1080P 60fps max settings, with the remaining 5% were mostly being the last 2 years of owning the pc. The PC lasted so long that the 7970 I Used heavily for 5.5 years started to artifact, so I managed to snag a radeon rx580 for only 100$ in february of 2019 for the last 22ish months of ownership. I think it is mostly down to that the fx8350 was released at just the right time. It was an era where games were slowly down in regards to getting more demanding. around 2016 there were some games that really were held back by the CPU due to the lack of IPC, but then Vulkan and DX12 started to pop-up, which put the FX8350 on life-support. The CPU was never excellent when obsessing over benchmarks, but always still always held in there at the bottom of the "viable" cpu range.
Been on the same 8350 and 990FX R2 since 2013. Been on a GTX 1060 since it came out. I should probably upgrade but it still works. same 1200 watt power supply too. Im overclocked to 4.5 and 32gb ram at 1800+.
Using the FX 8320, 8350, 8370 and FX 9590, all still great today, using Noctua U12A on them and iPPC 3,000RPM fan in the rear. All overclocked over 5GHz, Using the Sabertooth 990FX R2.0 Mobo, it's amazing! Teamed with EVGA 2070 Super K.O. TU104 GPU, its the perfect match imo
I am not sure but i will say that a PciE 3.0 Board with the cpu and the Gpu will be better preformance today . ASUS SABERTOOTH 990FX R2.0 is a PciE 3.0
You should change the core worker count in COD:MW2 between 4-6 when using the FX-8350. I tried 8 and it gave worse performance. I tried 6 and it increased the fps count. That game is unoptimized as hell and you need to do some tweaking in order to make this game playable. I have an RX 5600 XT GPU by the way. In older games with horrible CPU usage, just use DXVK and switch to Vulkan. On AC:O, I can actually game with an average of 50-70 fps at high settings.
Right now I have a FX 8300 overcloked to 4.0 GHz all cores paired with RX 460 4 gb and Ram 12 gb 1333. And it runs everything I need just fine. Really strong CPU , not as good as Intel on one core performance, but with Medium GPU can run even now and, I guess, in the future most games.
First pc build i did , back when bulldozer launched, was a fx6100, overclocked to 4.2ghz, paired with 2 HD6870s in crossfire. It did ok, especially for the time.
I had a FX-8320 @4.7GHz/16GB 2133 C9 (9-10-11-11-24, i think) and used about 230 watts under "normal" synthetic load (ruff calculation using a Kill-O-Watt). Frame rates where playable on modern games, 1% lows is what finally made me upgrade. Older games didn't have a low %1 issue, my guess is that newer games (made for modern CPU's) are simply not optimized for older hardware. Otherwise, my FPS jumped nearly 2x in half the new games and about 30-50% on average. I had a blower style Vega 56 running at 1500-1700MHz at the time, bios flashed and OC'ed with liquid metal.. I even cut out some of the restrictive grill on the bracket. Long->Short; it still works just fine for a basic gaming build with FPS goal of 45-75fps This gave me some Vietnam flashbacks lol
There's been almost 12 years and I still have my old OEM FX 8300, and still running all the actual games, almost all at 4K 30FPS High with a RX 5700XT...
Thanks for watching! You can support my work here: www.buymeacoffee.com/ratechyt
discord.gg/PFb9cMstZH ▪ instagram.com/ratechyt ▪ twitter.com/ratechyt ▪ facebook.com/ratechyt
My little son use my old Pc.
Board: ASROCK 970 PRO 3
Processor: FX 8350 Eightcore Processor
Graphiccard: Nvidia GeForce GTX 960
Ram: 4x 4GB Crutical (16GB)
Power: 820W Xilence
-
Works good Today for much games like World of Tanks, Strandet Deep, Much Singleplayer Games or Stuff like this.
-
For Games like GTA 5, Pubg, Battlefield and stuff like this, is it not Playable
Good old times and memories, still own my FX 8350 and Formula V Z board with 32GB RAM at 2400MTs and OC at 5.2GHz at 1.55 V xD Still runs, havent had a single FX die on me, more mainboards being on the deathbed. Man I miss my FX :D
Isn't 1.55v a bit too much? I believe that the recommended maximum safe voltage is around 1.4-1.45v. Lowering clocks to 4.9-5.0Ghz won't affect the performance that much.
@@hardware_maniac 1.55v is nothing for FX lol
So, motherboards died with FX?
@@bestopinion9257 motherboards die after a time anyway... mainly due to mosfet failure
@@OTechnology That's true. That's the average voltage on them when running 5GHz.
This video makes me smile, I was actually watching your video last week about the FX overclock and wondered if your old FX machine was still in use like mine is! I have my 8370 running at 4.7GHz as well at 1.5v with the RAM overclocked to 2133MHz (Ram thanks to your guide actually) and yeah... still enjoying my FX system a lot. I wish back in the day games used all those cores and that AMD hadn't allowed board manufacturers to offer users poor boards that couldn't handle the chips... Mine is paired with a Sabertooth 990FX R2 and it's very enjoyable.
Glad I could help you with your overclock!
Bro.... you've given me hope with my 8370.... And yeah even without overclocking it still runs games pretty decent. not to mention all the older games I have. Maybe I can squeeze a little more life out of it. Death Stranding is killing me at points, although that's more like a GPU problem I feel
@@Outwars1 hell yeah, the 8370 are the same bin as the 9xxx chips so it should push pretty high if your motherboard can handle it. I love this thing. Death Standing should run fine with your FX, it ran well for me on my 8370 @ stock paired with a 1060
@@kevinedward6132 Hrrmmmmm... I have an older R9 380X. Will see how it goes.
I'm using an old 4100fx, I don't play games it's fine for what I need it for. It's a rock solid system despite its age.
I had an FX 9590, OC’d to 5 GHz all core. It handled games just fine back in the day.
I had one and it HAD to be liquid cooled.
@@ekspatriat mine ran cool enough, well, I guess an AIO counts as liquid cooled huh? I had a Corsair H100i
@@chincemagnet Yes mine was an AIO AMD actually said it must be so.
I had a 9590 on Sabertooth 990FX R2.0 with an Alphacool 480mm x 60mm and custom chipset and vrm waterblocks. I should put the old beast back together and tinker with it again. It was too much fun.
Also had an 8350 that would do around 4.8GHz, and several 6300/6350's that would do 4.95GHz with a good air cooler.
Now that I know how to OC RAM properly, I bet I can squeeze even more out of em. 🤔
I pulled an FX 8300 out of a dead HP machine, the die being diffused in late 2015 it was the cherry to end all cherries. Pulls about 40% less power than an old FX9590 we had to hold the same base 4.85GHZ stably; 1.275v versus 1.465v... and it was actually a lot faster in games as the FX8300 had a much much better memory controller, NT/HT/DDR3/2600 24 hour memtest stable. But that's the silver lining when you make the exact same chip for almost 4 YEARS. lol. Gloflo had their 32nm honed in like mad by the end.
It still games really good thanks to 8 threads too, but would never recommend one as anything as a curio, old higher end motherboards and decent DDR3 are a ripoff on the used market, and even first gen ryzen 1600 with a cheapo B350 would gap it good for a tiny fraction of the price.
the legendary CPU returns at last
I had one of these. Far from legendary
@@danb4900 mine was for $100 in 2013, cry about it
Garbage ass CPU but yeah, still nostalgic about it.
@@SwattiiI’m still using it 😢 I didn’t know about computers at all so I got it late 2013, then early 2015 I went ahead and paired it with a 3440x1440 monitor and a 980ti. That still my setup, im about to upgrade soon but I think over the years what has carried that atrocious build was the 980ti
Legendary, for all the bad reasons.
This is My favorite CPU the AMD Bulldozer FX-8350 it's still completely good even if it didn't become successful it's still is great.
its good if you dont have to pay for the electricity.
it's a second-generation pile driver, not a first-generation bulldozer.
FX Rigs are still good computers. Of course for gaming, I need a lot more than what it can offer me but my wife is using one I built for her a few years ago and it's stable. She has never complained about anything. 😄
I still use a 8350 with a 1660 ti . i have no issues in almost every game play. i would like to upgrade just not ready i guess .
Love your content, still own my FX8350 with 990FXA-UD3 and still going somewhat strong
8320E gang is here
Still running one with 970 Gaming RX 580-8GB 16 GB DDR3 ...Fabulous☺
This is almost my exact setup but I have a 570. I'm sorry to think maybe I should have upgraded at some point
Tbh, it is still perfectly usable. During the shortage, I had to quickly find a replacement board for my wife's PC, so I gutted by seed box, and here you go, FX-8350 b\w 16 gigs of random DDR3-1066 and idiotically paired with RTX 2060 Super. It handled Hogwarts Legacy just fine on 1080p with DLSS Quality and overall medium settings preset, hovering around 45 to 50 FPS, with decent frametimes. As you can imagine, apart from Last of Us and Redfall, it still can handle pretty much anything rather decently.
It is time to upgrade, no questions here, but this combo was great when I bought it, and continues to help me out over TEN FRICKING YEARS LATER.
I put an FX8350 build together, was fairly impressed with it, first I had it paired with a 1050 ti then a 1650, gaming performance was good, got lots of gameplay vids on my channel from that build
I still have 2 AM3+ systems for older family members (email, surfing net etc) with FX4100/4300 (8GB ram/ssd/7770s). I wouldn't mind upgrading them with FX 8320/8350 but people asking 50-60 euros for these ancient cpus. Buying used A320 mobos and Ryzen apus to retire em makes more sense.
Yeah, especially that FX 8000 CPUs are very power hungry and need high-end motherboards to function properly. People buying FX 4000 rarely buy expensive motherboards with them.
if your motherboard has 8pin cpu power connector fx8120 and up are fine but if your motherboard only has 4 pin power... i wouldn't do it even if it says its supported. Rip my msi 890gx and crap psu
Two of the PCs used in my household are severely OCed FX8320s paired with an RX580. Still play anything you can throw at them.
Whole year's production budget went on the propane for the intro! XD
I currently hold all the records bar one on 3DMark benchmarks on air cooling with my FX8350 with my 8GB RX580 and it has been huge fun overclocking and still able to play most games with FSR enabled aswell still.
Im about to retire my RX 580 8gb and throw a RX 6600 in my FX 8350 AM3+ rig. Going strong, 10 years later. Out of all of the PC builds I did over the years, the FX 8350 has given me the most mileage for 50 - 80 fps and 1080p - 1440p gaming.
I upgraded to Ryzen 1600 in 2017 because I had upgrade fever and then swapped out to a Ryzen 3600 that I currently drive as my main.
I still keep my FX 8350 AM3+ build around because it just performs brillaintly for what it is, and all these years later, it still gets very playable performance across a very broad range of titles and many modern titles.
Reason old cpu now performance more is thanks to directx 12.
Real directx 12 games use more cores.
Well old directx 11 and lower (directx 11 Hybrid 12)
Have all the same problem.
It use the 1ste core for a lot of things and the rest do nothing really.
That is the reason intel.i-serie have a good performance in that time.
Test it today and intel well not have that extra singel core performance boost in games.
No, first warzone was quite playable on FX 8350, i played it on stock one with ultra settings, got 70+ fps
That's what I'm saying! After playing Warzone 2.0 I realized that the performance in the first Warzone wasn't so bad, even with those dips below fifties.
@@RATechYT It's not a processor's fault, it's just that modern games are total technical garbage :(
I would love to see how FX8350 age compared to Sandy Bridge or Ivy Bridge 4/4 and 4/8. Anyway, amazing retro-review! The bottleneck is WAY less than expected. Sometimes only 20~30% on ultra settings depending on game. Really low. We hame something very similar on some modern 6/12 like Ryzen 1600 or even better CPU using 6600XT alike cards. The biggest bottleneck mainly in heavy cpu demanding game.
Thanks!
I can tell you it loses to Haswell by a significant margin. The older Ivy Bridge processors were not much slower.
@@tyrkukulkan Yeah, Haswell is much faster, even 4/4. But Sandy Bridge? I have my doubts. Specially versus 4/4 CPU.
@@rodrigomendes3327 Haswell is only 21% faster then Sandy bridge, but ofc back then 20% was a huge jump compared to the 1% jump in Sandy vs Ivy the generation before.
@@budgetking2591 20% faster is a HUGE difference. Absolutely HUGE difference. And it's not only 20% better than Sandy Bridge, is something close to 30%. It's 20% better than Ivy Bridge. I had all of them. Including FX8300 Series.
I'd love to see some action with the Phenom II X6s compared to modern CPUs
I tested a 1090T and also compared it to an FX-8350 & FX-6300 about 4 years ago. Video quality has definitely come a long way since then, but you can still check them out on my channel if you're interested.
I am watching and typing this on an FX-8370 running Linux Mint Mate. A great CPU that has held up flawlessly for almost a decade.
Still using a FX8350 running at 4.72ghz with a RX580 Red Devil Gold edition for my daughters rig. I upgraded my main to a 2700x & then to a 5900x but for the games my daughter plays the FX is still killing it. Dead by daylight, fortnite, killing floor 2. Cpu is a beast. have a second FX-8350 is brand new in the box. When I built the system I didnt want any rgb, all fans and cooler are black with red led's inside a corsair vengeance ammo box case with a custom made clear side panel. Keep up the tops vids mate :) looking forward to 2024 Fx still killing it :)
give me the CPU NOW!!
I have been using fx 8300 4.3-4.5@ghz for 6-7 years, I was so happy, it was so cheap and even cheaper than intel pentium g3258 in that time. While everybody said that even pentium better for gaming, I knew it wont last long with just overclockable 2 cores.
Now I have a temporary i5 6600, even tho it is much better on emulation or old singe threaded games, I have experienced some inconsistency that I never experienced with my old fx build. Like my i5 6600 can not load forza horizon 5 map while travel roads become blank, and it is even worse on at hot wheels expansion, in uncharted some scenes pauses my game to load assets this happened 7 times in a row takes more than 15 minutes total and nearly always %100 usage on games even with a clean debloated windows :( I have never experinced these things with my old fx before with same games.
Interesting!
I am still using it. Intensive lightroom and Photoshop use. Recently I was stacking 125 photos and made 37 minutes to finish. Then I realised that it's time for an upgrade. My most trustworthy pc will finally rest.
With PCI-e 2.0, I think you should use a 16X card, like RX 5700 or RX 6700 to reduce bottleneck in games that demand a lot of Vram
Ooooh! I totally forgot about the 2.0 interface!!!
I searched UA-cam for a comparison between FX and first gen i7 and found nothing. it'd be informative if you make a video in that regard.
watching u from 1 right now... waiting for my mobo to upgrade to 7800x3d
What a HUUUUUUGE upgrade, man!
You are gonna feel those 8 cores and the speed of the 5Ghz base clock, dang! Congrats.
I hear Asus have plenty in stock lol.
I recently upgraded from my trusty FX8350 to a 7 7700X. The difference is MASSIVE! However, my FX is and will always be my favourite CPU as it was part of the first build I ever did and thus it will stay in its original box on my shelf forever.
I overclocked it and played games like BF1 and BFV with it. Sure, framerates were low and temperatures high - but it did everything I could have ever asked for. I just upgraded because the rest of the system had been in use since 2013 so I didn't quite trust the hardware to work at all times (need my PC for work).
what was the rest of the system?
I still work my FX8350, MSI R9 290, 990FXA-UD3 since early 2014
what you mean overclocked for bf 1? I played Bf1 on almost all ultra with my stock 8350 and r9 290 with around 45 fps avg
i'll be going into 2024 with.. a fx8350 system Which IS and upgrade from the phenom 2 in which its replaced. runs doom eternal fine runs cyber punk....and world of tanks just fine mission accomplished.
Why 4.7 and not 5G with NB OC and better RAM? Really "max out" what this baby will do maybe? Just some thoughts, no hate. I still have my ol FX, I got lucky and snagged a FX 9590 for cheap, i just need a better Mobo and RAM, that crap is pricey$$$ these days. lol
5 GHz would probably require 1.6v with my FX-8350 - all that extra heat and power consumption just isn't worth it for 3-5 more FPS. NB and RAM were also maxed out, going any further makes the PC unstable.
@@RATechYT Oh yes i understand. I skipped the first part of the video when you discussed that, i just went to the meat of the vid, that's on me so nvm. :)
i remember having a 6300 and an r7 240 and boy that was rough
Your channel the only reason I kept my FX-8350 till January 2023, got gifted a new motherboard with Ryzen cpu and swapped them. But I hanged the motherboard with the FX on the wall.
People complain about FX heat and power consumption, and now look at Intel 9900K/10900K/11900K/12900K/13900K, LOOK AT THEIR HEAT AND POWER CONSUMPTION
But the difference between them and FX is that they are not outperformed by the competition in terms of performance.
Hey im immediately buy fx 8350 good cpu amd phenom 2 x4 925 to fx 8350 😊😊 and im get gtx 760❤❤
I still daily drive a fx-8150 on an Asus sabertooth 990fx the original self-contained AIO that they had for these boards, 32 GB of DDR3 and 4 one tb 2.5 ssds.... Running 3 monitors on a GTX 1650 super.
Everything but the GTX and 16GB of the ram is from 2014.
The system was given to me a year ago and I use it for music production and basic blender director as well as the streaming and all the other daily Business. Awesome play Halo rather well and also Forza 5 I was getting like 80 frames on mostly high settings to my 1080 43 in, and I still had the other 32's running basic metrics in the background.
i wish a had the saberthooth back in the day. bought a gigabyte fxa 990 ud3 instead. it's still my daily, but im upgrading for a 5700x in a few days.
@@umdiaaposooutro2393 yeah these days for a MOBO with as many lanes you have to spend at least 600
@@shyfawxproductions bought the Asus b550m tuf bluetooth II and the 5700x to go with it. suuuper exited since I'm upgrading from the fx8350 + fxa990 ud3
I had an FX 8320 that I used for years. It came clocked at 3.5Ghz, but I was able to get up to 4.3Ghz. It was a very capable CPU, especially in the early days. I planned on holding on to it when I built a new PC, maybe in 2018, which I did for a while. But I had a friend, who like me, isn't wealthy enough to just go buy whatever and he was going to try and build himself a PC. So, since I had to get a new board, new ram and so on for my build, I gave him the CPU, MB and 64gb DDR 3 ram. So that CPU is still out there and doing its thing. I really liked the CPU.
I still use my FX 8320. This thing compiled as fast as an intel chip at twice the price at the time. And the mainboards were 50-100 dollars cheaper, because they still use a north bridge.
Because of the great multicore performance, and modern games targeting 8 core processors, it holds up increadibly well overall
GO TO THE BIOS AND ENABLE UNLOCK CPU, DUDE TRUST ME AND DO BENCHMARK
YOU HAVE BEEN USING 4CORE 8THREADS INSTEAD OF 8CORE 8THREAD
I've never seen more vitriol towards a processor in my life than the FX 8350. I don't understand where all the hate and bias came from. I tried being reasonable on forums by posting this Tek Syndicate video ua-cam.com/video/eu8Sekdb-IE/v-deo.html but everyone kept saying that Tek Syndicate was lying and paid off by AMD. I remember the 3570K and the FX 8350 were both around $200 when they came out and shortly after the FX 8350 dropped to $170 and then after about a year could be found for $150 easily whereas the 3570K remained locked at $200. I remember the FX 8350 would always be very close the to 3570K for gaming and then destroy it with video encoding/decoding. Then the argument became that the $300 3770K did video encoding/decoding just as good and sometimes better even though it was twice the price. At the end of the FX lineup's run I ended up picking up a deal at Microcenter for an FX 8320e with a free motherboard for $90 and built a computer for my in-laws that they still use to this day. I was so impressed with it that I ended up building another one with the same deal for myself that I left at my buddies house for LAN gaming (Payday, Killing Floor, Borderlands 2, Overwatch). I ended up giving that PC to my nephew recently that he's using for his small business and he's happy with it.
I had an FX 6300 with an R9 270x back in their days and i was able to play anything in 1080p just fine back then. I think people gave the FX too much hate than it deserved cause back then it did have many cores but there were no games to actually use them,and right now they do use them but it's still slow because it's old arhitecture. If you'd try a 2nd gen or 3rd gen i5 which are as old as the FX they won't do that much better either in modern games
Old games such as Crysis 3 (2013), Battlefield 4 (2013), Witcher 3 (2015), Division (2016) and many more also performed better on 8 FX cores compared to similarly priced quad core i5's! I demonstrate that in the i5-3470 vs FX-8350 comparison - ua-cam.com/video/qCFeWb4skhE/v-deo.html
Maybe back then when it was new the thing had problems, but when your in a category like me where new tech is out of your reach so your always behind, well it's amazing. I just got one with an ASUS MSA99FX PRO R2.0 Motherboard , 16GB memory with an RX580 and I love it . I went from having an A8 processor to this FX8350 and not only does it perform way better then I could of imagined, but every game I play makes the A8 look like a snail . I'm even using a Toshiba mechanical HD and everything runs smooth as butter and I was surprised I can now run games on it with much higher settings . One of the things I did was change the default settings on the MB and I think a lot of people make that same mistake and never change it or tweak anything, oh and no over clocking needed . Also I have never been a fan of apps that test your system, because I don't care how good they claim to be it just can't compare to a real world test with real games where you can adjust and change the settings. Remember also you can run higher settings, but just turn off some stuff , like motion blur , particle effects , turn down shadows and some other settings. With older hardware you just can't do Apple's to Apple's and I will never understand why no one makes a video about that, because when you play a game in the real world with limited specs your going to adjust for better performance and over time you find out exactly what makes your system run the best. This is a good video , but not realistic in terms of what someone would really do . Gotta also remember when the 8350 come out some PC settings didn't even exist yet so this is why you should turn off certain settings, so maybe make a video about that.
I agree I had the FX 8350 and FX 9590 for 5 years it did everything I asked a computer to do with no complaints. I even did crossfire with 2 rx380's for a while then, I got the rx 480 Sapphire Nitro+ OC edition. I even put a water cooler on it when I water cooled my FX 9590. So many good memories gaming back then, could you play Crysis? That was gaming.
CHANGE THE PSU
FSP Hydro are fine for simple PC builds but FX need high quality PSU.
I am FX veteran. My mobo was a Gigabyte 990FXA-UD3 R5 and the exact same HyperX 1866 RAM you have.
I managed to get a cheap FX-8320E to 4.6GHz 1.5V (medium LLC)
Later I got a FX-9590 for dirt cheap which I OC to 4.9GHz all core with the same heatsink and 1.53V
My PSU was a EVGA Supernova G3 750W (that still rocking).
I think you could get much better OC by using a good PSU.
Try to check the 12V line while running a bench with the FX. I am sure the voltage will drop significantly and god know how bad ripple is.
I still have my FX 8350 with a Motherboard UD5 from Gigabyte and 32 GB of RAM, is my server now with my old graphics card RX 560 4 GB, I use now with proxmox and with some containers and VMs and still is a little beast, but for my needs and workflow is a little weak to handle all my homelab for his own, I'm thinking to replace it, but give it to my parents where can be used for more years :D
I still have an Fx8120 overclocked to 4.2Ghz 1.3625v Medium LLC with a GTX 660 ti with 16GB of ram. I did leave the power save settings on because the system becomes too much of a power hog when stressed. I don't mind benchmarks taking a 15% hit with the settings off. System still feels moderately snappy and runs games pre ps5 era very well. The thing is, you don't want to couple this with anything more than an RX 480 because you will get bottlenecked hard, especially in newer games for consoles that rely on zen2 cpu horsepower.
Nice to see someone who knows what he`s talking about, i`m just sick to see puppets on you tube talking about ``fake`` 8 cores or ``horrible`` performace of FX cpu`s while they where ok, yes Intel had top hand but these where cheaper as where mobo`s for them, i whent from 4300, 6300 to 8350 and i was satisfied with them all, now i run on r7 4750 but looking for some good 6300 with mobo deal to buy it and put together some mean retro machine with my old beautiful Powercolor R7 370.
Thanx for this video! Highly interesting. I just bought one (used of course) for 75,- to make a last upgrade on a PC-studio-machine from 2011 with a GigaByte AM3+-Board. I did not install it as of yet, but the former CPU was a Phenom II X4 965 Black Edition, so I think it will make a lot of sense. Main task on this DAW-machine is audio / music-production and some midrange game-design in GameGuru Max.
In Germany the FX-series was not hated in reviews, quite the contrary. It was always well respected. The reason that back then I put a Phenom II X4 into the PC was the fact that the FX-design shared 1 FPC with 2 cores. The Phenom has 1 FPU per CPU how it should be. FPUs are very important in audio-processing... So now with 8 integer-cores and 4 FPUs it should clearly surpass the Phenom II.
Just upgraded to a ryzen 7 7700 from this. The FX were awesome but ran very, very hot. I almost fried mine with a stock cooler before switching to liquid. Got almost 8 years out of it.
Thank you AMD for saving us from a decade of Intel cpu milking without innovation
I have FX 8350 config and still working fine in 2023 ! But need to use very good motherboard, very important !
My config
Motherboard : ASUS Crosshair V Formula-Z ( Best AM3+ motherboard ever ! )
CPU: FX 8350 BE Black Edition
RAM: 4x8GB Kingston Hyperx Fury 1866MHz CL11
VGA: Asus Geforce rtx 2080 ti OC 11GB
Power Supply: Coller Master 750W 80+ Gold full modular ( very important to use Power Supply )
SSD : Samsung 860 EVO 250GB + 2TB WD Blue 7200RPM HDD
This config is not the cheapest but very good ! In GTA 5 more then 100+ FPS ;)
I still rock an 8350 in a crosshair v, 32 gb ddr3 1600 and rx 580 in a windows 7 build just for certain games. Especially older bethesda titles, they do not play well with Win10 or 11.
People complain about FX Prozessors running too hot.
Me: looks at the newest Prozessors where many can easily hit 90+ degrees at stock....
still rocking with fx 8320 and planning to upgrade my 750 Ti, this oldman still capable for photoshop lmao
You are right! Guess what: i'm still using an FX 6100 actually overclocked at 3.9Ghz but i had it overclocked at 5Ghz for fun & guess what: it runs MotoGP 22 on Ultra, 2160p with 60FPS, no drops & only 40% to 50% CPU usage.
ua-cam.com/video/dcPWCcWbsSE/v-deo.html
I'm still using it & i'm very happy with its performance.
dude i dont care what they say i enjoy this chip for a long long time 6 years to be exact was cheap push 70+ fps in that time when monitor wherent that crazy , it warm the room in winter and it was a sauna in summer give the AC a run for his money.... damn this video have a lost a nostalgia a bloody zalman fan
I still use it in 2023 it still holds up for me. If your looking to build on the low on 1080p then the FX 8350 will do fine.
Isnt the 2.0 pci-e bottlenecking the 6600 xt? since it only uses 8 lanes, which would be pcie 2.0 x8 (4 GB/s)
I have 7900x and 8370 .. 8370 still works oc like monster …
LOL, I still use a weker version of the FX as my main work PC. Looking to upgrade though.
I still have the 9590FX on a old Asus motherboard and the 8350FX
I use to have mine at 5.7ghz and blew it up because i was using the stock cooler lmfao
i had an fx8120 that can reach 6ghz with all the vcore. and runs stable at 5.5Ghz
i'm still running mine as a "media machine" set-up (never oc'd, original hardware 16gig of ram, gigabyte board, but replaced the old spinner hard-drive with an ssd and using a noctua air-cooler). works fantastic, can have 3 to 6 movie/tv episode downloads going while watching a movie or youtube and browsing ebay and stuff all at the same time no problems :)
My first cpu was i5 6500 I built it in 2016 I think with gtx 760 boy did u have fun
An FX-8350 for $80, why would anybody buy it at that price?
Upgrades.
For people with AM3+ sockets with older processors like FX-41xx and FX-61xx looking for a nice upgrade on the cheap.
got any recommendations for an AM3 CPU?
@@Prizzim AMD Phenom II X6 1055T is about as good as it is going to get on that platform. Make sure your motherboard supports it, as I believe this processor consumed a lot more power than the lesser AM3 processors.
At this age and scarcity of product, the CPU is likely to cost more than it might be worth for likely to get out of it. If you're rocking a Sempron or something like that and only have like $120 or whatever to spend, then this will be a considerable upgrade. However considering its advanced age, you might think about if upgrading to some other slightly used platform is in your budget. This is at the end of what I'd consider being a worthwhile upgrade, and I suspect many people would consider it not worth it at this point.
You had to bring it back one more time. 👍🏻
I used a Phenom II X6 + RX 560 with 8gigs of RAM to play Jedi Outcast. Lower but always smooth FPS, was quite playable
phenom II was just Down right Faithful.. just a Solid Good Cpu line up..all the ones iv had .. (secret phenom renamed to athlon. 7750 an athlon with 2mb of l3 cache) phenom 9660,phenom2 720 phenom 2 555(unlocked to b55) hitting 3.7ghz on air all day. phenom2 960t, phenom 2 1045t,phenom 2 965
AT 4.7GHZ YOU WILL GET VERY GOOD RESULTS AND FPS
Still run one on in a workstation. That still has two GTX970s.
I just sold my 8350 last year still ran great.
I just sold my old FX-8350 to someone a few months ago.
I had to check twice to make sure they knew what they were buying because they said they were building a system and all I could think is "who builds and FX system in 2023?"
Still using an 9590fx at 4.9ghz 1.46V, I only play a few games where the fx still delivering good performance with an 6700xt in 4k 120hz. I am thinking to upgrade mostly for lightroom as it start to show the age now, but 10 years is a great result for this little "failure", and I love it
I still have this cpu, can someone suggest me a good gpu for it.
lol Glad I got the haswell chip back in the day
I need to go back and test my stock FX 8350, but the last three test I did with Company of Heroes 3, Dead Space Remastered, and Last of Us using a RTX 2070 Super, things did not go well on Dead Space and Last of Us. Last of Us had some terrible cpu utilization going on, which affected even the i7 6700K I have here. Since a number of patches though, last time I tested Last of Us over the weekend on the i7 it ran really well, so my hope would be that things improved for the FX also at least enough so you could run the game at a steady framelocked 30fps. Dead Space though I am not sure if they have patched it at all since the last time I tested it. In game gameplay was fairly ok, but the opening story scene with the video message from Nicole was a slide show. It came off as buggy and something the FX just could not brute force its way past regardless of clock speed. I also got weird issues when trying to just start the game from save points where I would have to restart the game sometimes. The game already had issues on a Ryzen 3600, but not the kind where I had to struggle to get into the game.
Which basically sums up my fears for this cpu in 2023, that a lot of new games getting released, as buggy as they are, the FX wont be able to brute force them on launch day, and people will get stuck sitting around waiting for a couple months worth of patches to get the game optimized. I don't even want to know what Jedi Survivor performs like on it right now. The plus side though is Company of Heroes 3 ran extremely well. You can bank on a 50-60fps average with a mix of medium/high settings. Relic is pretty much one of those developers you can count on to put out something that works well on day 1 though.
I had the 8320, used it for 7 years before I had to sell it when moving elsewhere. It's a great processor!
Still rocking a 8370E right hia!
The cyberpunk results are a bit strange.
I ran through the whole game at locked 30, with a fx-8320 at 4,2 ghz.
Streaming issues could occur at high speed, GPU related though.
Just to be sure I don't talk out of my ass I went to the exact location in your video and yeah, 38 fps.
Nothing consistently below 30 over the span of the 3 last patches
Ah yeah, forgot to add, my results are with medium/high settings 🙃
Edit2: ah, it's because you are recording!
What are your specs?
@@RATechYT old stuff
R9 290 at 1100mhz
16gb ddr3 at 1866mhz
Motherboard M5A97 R2.0
Sata6 SSD
@@JackVogel2024 You're also heavily bottlenecked by the graphics card.
@@RATechYT Yeah the whole god damn system is nothing but a bottleneck these days!
Been a good run, but starting to look at an upgrade
Brings me back to my previous setup which i upgraded a few hours ago. fx-8350 & 4x8gb ram & 660ti gtx. Unfortunately the cpu (fx8350) started overheating until it eventually died out.
Did you find out the cause of overheating? thermal paste dried out?
keep apex legends on your test game
Finally you're back brother.
BTW
I have fx8300@4.8ghz.
1.45v to 1.47v.
Ram 1866
NB 2600
Hyper link 2400
Asus 970 aura pro gaming, with a beast vrm,
What do you think about my overclock.
Nzxt 240mm liquid cooler
It's great!
@@RATechYT 💖
Great video! It's hard to believe that everything is still going so well. A few days ago I found a Fatal1ty 990FX Killer motherboard with AMD FX8350 on the street. And guess what? It works ! I'm building a retro system from 2012. The hardware still costs quite a bit and I saved the money.😁
You're some lucky dude!! :D
Should be enough for everything but high-end gaming or advanced video editing :-3
not bad for a decade old quad core
algorithm is blowing u up bro
Test i3 9100f
And i3 8100
Too
Back in the day i had a fx 8350 and a gtx 770.
It was my first computer that could actually play most games, so many hours of tf2, counterstrike and gta 5 were played on those parts.
TURN ON UNLOCK CPU TO REALY EXPERIENCE THE 8 CORE, I FOUND OUT AFTER MANY YEARS OF USING THIS CPU
Hmm interesting. How to do this in bios? Can you post benchmarks of the difference? I tried mine with ASUS Core Unlock and it still shows 4 core 8 threads in Win 10 😢
it's a great proc, mine is still alive and running well too, just changed it a few days ago coz the mobo ram slots started to crap out
I had the fx 6100 black edition , it was a good cpu .
Still have the FX 6100 black edition & it runs very demanding modern games at 1080p, 2K & 4K ultra / very high / high settings, 60FPS even now in 2023. It has never dissapointed me.
I'm still upgrading mine. FX 8350, 16gb DDR3 2133, Asus 990X mobo. I need a new GPU for it tho. Been using a 470 4gb but I want to get an RX 480/580 8gb for it and an FX mobo. Also 32gb of DDR3 2400. My chip runs 4.7 on a Cryorig H7 but there's headroom if I can lower temps so I'm going to need a 360mm aio for that CPU to get 5ghz all core.
Ran my fx8350 for almost exactly 8 years. (January 2013 to December 2020). I never had any complaints with the cpu. Paired with 16gb ddr 1866mhz memory, 2 sata ssds (1os + 1 games), and a radeon 7970 I always had good experience with the pc. 95% of all games I played could still achieve 1080P 60fps max settings, with the remaining 5% were mostly being the last 2 years of owning the pc.
The PC lasted so long that the 7970 I Used heavily for 5.5 years started to artifact, so I managed to snag a radeon rx580 for only 100$ in february of 2019 for the last 22ish months of ownership.
I think it is mostly down to that the fx8350 was released at just the right time. It was an era where games were slowly down in regards to getting more demanding. around 2016 there were some games that really were held back by the CPU due to the lack of IPC, but then Vulkan and DX12 started to pop-up, which put the FX8350 on life-support. The CPU was never excellent when obsessing over benchmarks, but always still always held in there at the bottom of the "viable" cpu range.
Been on the same 8350 and 990FX R2 since 2013. Been on a GTX 1060 since it came out. I should probably upgrade but it still works. same 1200 watt power supply too. Im overclocked to 4.5 and 32gb ram at 1800+.
Still gaming on my FX-8320E overclocked with a GTX 1660 Super. Runs surprisingly well as long as you stick to 1080p with low/medium settings.
Using the FX 8320, 8350, 8370 and FX 9590, all still great today, using Noctua U12A on them and iPPC 3,000RPM fan in the rear. All overclocked over 5GHz, Using the Sabertooth 990FX R2.0 Mobo, it's amazing! Teamed with EVGA 2070 Super K.O. TU104 GPU, its the perfect match imo
I am not sure but i will say that a PciE 3.0 Board with the cpu and the Gpu will be better preformance today .
ASUS SABERTOOTH 990FX R2.0 is a PciE 3.0
it doesnt looks so, can you doublecheck. it looks that it only supports PCI-E 2.0
ASUS SABERTOOTH Gen3 990FX R2.0 is the correct support PCI-E 3.0
You should change the core worker count in COD:MW2 between 4-6 when using the FX-8350. I tried 8 and it gave worse performance. I tried 6 and it increased the fps count. That game is unoptimized as hell and you need to do some tweaking in order to make this game playable. I have an RX 5600 XT GPU by the way. In older games with horrible CPU usage, just use DXVK and switch to Vulkan. On AC:O, I can actually game with an average of 50-70 fps at high settings.
Right now I have a FX 8300 overcloked to 4.0 GHz all cores paired with RX 460 4 gb and Ram 12 gb 1333. And it runs everything I need just fine.
Really strong CPU , not as good as Intel on one core performance, but with Medium GPU can run even now and, I guess, in the future most games.
First pc build i did , back when bulldozer launched, was a fx6100, overclocked to 4.2ghz, paired with 2 HD6870s in crossfire. It did ok, especially for the time.
I had a FX-8320 @4.7GHz/16GB 2133 C9 (9-10-11-11-24, i think) and used about 230 watts under "normal" synthetic load (ruff calculation using a Kill-O-Watt). Frame rates where playable on modern games, 1% lows is what finally made me upgrade. Older games didn't have a low %1 issue, my guess is that newer games (made for modern CPU's) are simply not optimized for older hardware. Otherwise, my FPS jumped nearly 2x in half the new games and about 30-50% on average. I had a blower style Vega 56 running at 1500-1700MHz at the time, bios flashed and OC'ed with liquid metal.. I even cut out some of the restrictive grill on the bracket.
Long->Short; it still works just fine for a basic gaming build with FPS goal of 45-75fps
This gave me some Vietnam flashbacks lol
There's been almost 12 years and I still have my old OEM FX 8300, and still running all the actual games, almost all at 4K 30FPS High with a RX 5700XT...