Murray M2510 gas trimmer fuel line replacement
Вставка
- Опубліковано 3 жов 2024
- #mnhmarcum #generationx #Partszen #Murray #Trimmer
Fuel line replacement on a 2016 Murray M2510 2 Cycle gas trimmer.
Simple job to do. It was $13.99 plus tax on Amazon for the kit I purchased.
Do it your self and save some $$$. Basic hand tools and a little time and you'll be ready to trim again.
Thanks for watching everyone.
I have the same trimmer. After several years of use and not draining the tank and lines prior to the off season, this summer it ran poorly. I pretty much had to run it on choke. I ordered the replacement carb and it only had one diameter hose come with it. So far, I've managed to get the hose through both holes on the tank, the filter on the hose going through the hole furthest away from the tank. Both of them are hooked up to the proper nipples on the carb (i think). I'm just hoping when I get off work, to go home and fire it right up with no leaks. Thanks for the video.
I hope it works out for you.
I just found one can't get the fuel cap off
I’ve had to use a big pair of channel locks before. Just have to be careful not to squeeze too hard or it might crack the cap.
I have the exact same weed eater with the same problem. What i partezen part number did you order ?
I got on Amazon and looked for a fuel line kit that came with different sizes lines and filters. There’s all different companies online you can get universal kits from. It’s cheaper in the long run rather than going to a hardware store and getting a couple lines.
I'm sorry man but I didn't learn very much from your video
Honestly there really wasn’t much to learn. It’s was just a basic fuel line and carb replacement. Most of our 2 cycle videos are just stuff we found at thrift stores or was given to us to see if we can make them run. We just do what we can to try and save people money on parts and labor at shops. Sorry you didn’t like it.