Eventhough I don't understand Hindi. But I am really appreciated your effort to make this video. I keep practicing and then watching your video again in mute mode. Thank you!
Escape the command . Once press F12 ( function key) Then try again.. must check when you select first for any command move the cursor and see angle length block is visible with cursor
Ok.. If you. Notice this diagram this degree start from left side at 180° ( according AutoCAD Degrees counting) Vertically straight 90° Horizontally straight 0° So 180°-129° = 51° You need to draw this line 51° form horizontally straight 0°
Ctrl+p In the Printer/Plotter section, select a printer from the Name drop-down list. If in doubt, the Default Windows System Printer usually works. In the Paper Size section, use the drop-down list to select a paper size that’s loaded in the printer or plotter. Anything Letter size (81/2 x 11 inches) [A4 (210 x 297mm)] or larger works for this example. In the Plot Area section, select Limits from the What to Plot drop-down list. This is the entire drawing area. In the Plot Offset section, select the Center the Plot check box. Alternatively, you can specify offsets of 0 or other amounts to position the plot at a specific location on the paper. In the Plot Scale section, deselect the Fit to Paper check box and choose 1:10 from the Scale drop-down list. The 1:10 option is the scale that’s used to set up the drawing. You receive no prize for guessing the metric equivalent of 1:10. In the Plot Style Table (Pen Assignments) section, click the drop-down list and choose monochrome.ctb. The monochrome.ctb plot style table ensures that all lines appear in solid black rather than as different colors or weird shades of gray. Click Yes when the question dialog box appears, asking Assign This Plot Style Table to All Layouts? You can leave the remaining settings at their default values.
zoom करनेपर tangent और दोनो circle के बिछ थोड़ा Gap दिखाई देता है ईस error को ठीक कैसे करे, इसपर कोई विडिओ बना सकते हो तुम! मुझे बहुत दिनोंसे ये प्रोबलम आ रही है। इसका कोई तो सोल्युशन होंगा ना।
@@TheRisingSun-INDIA In circle command type unit value as Radius ..if you have to enter diameter value .. so type D for Diameter Press enter key out diameter value
Eventhough I don't understand Hindi. But I am really appreciated your effort to make this video. I keep practicing and then watching your video again in mute mode. Thank you!
thank you very much for your sharing. it was helpful for me
i like your all videos, Thank you.
Nice
When to use Tan,Tan,Radius and when to use fillet ??
Thanks
thanks!
Helpful for us .
Thanks sir
KHALID MAX CAD
Welcome
Sir super it is very help full but put audio also useful 👍 then what is the meaning of pcd
Pitch circle diameter
after pressing tab angle it is not asking for angle what should i do
Escape the command .
Once press F12 ( function key)
Then try again.. must check when you select first for any command move the cursor and see angle length block is visible with cursor
Press L enter @length
why in exercise 2 you draw fillet between circle and here you draw tan tan radius between two circle ?
Your are the true viewer ..
Its both ideas you can manage as you like & simple
@@anketkamtekar ok thanks you dr.
Sir how u found the degree in that part u would say by bevel protector but how u apply on this part
Mentioned in diagram 129°
@@anketkamtekar yes bro but if someone give a solid part to me then how I would find a radius
You talking about Which radius ???
Sorry bro I wanted to write degree
Ok..
If you. Notice this diagram this degree start from left side at 180° ( according AutoCAD Degrees counting)
Vertically straight 90°
Horizontally straight 0°
So 180°-129° = 51°
You need to draw this line 51° form horizontally straight 0°
How to print in Auto CAD, a4 size..
Ctrl+p
In the Printer/Plotter section, select a printer from the Name drop-down list.
If in doubt, the Default Windows System Printer usually works.
In the Paper Size section, use the drop-down list to select a paper size that’s loaded in the printer or plotter.
Anything Letter size (81/2 x 11 inches) [A4 (210 x 297mm)] or larger works for this example.
In the Plot Area section, select Limits from the What to Plot drop-down list.
This is the entire drawing area.
In the Plot Offset section, select the Center the Plot check box.
Alternatively, you can specify offsets of 0 or other amounts to position the plot at a specific location on the paper.
In the Plot Scale section, deselect the Fit to Paper check box and choose 1:10 from the Scale drop-down list.
The 1:10 option is the scale that’s used to set up the drawing. You receive no prize for guessing the metric equivalent of 1:10.
In the Plot Style Table (Pen Assignments) section, click the drop-down list and choose monochrome.ctb.
The monochrome.ctb plot style table ensures that all lines appear in solid black rather than as different colors or weird shades of gray.
Click Yes when the question dialog box appears, asking Assign This Plot Style Table to All Layouts?
You can leave the remaining settings at their default values.
Check my channel on how to plot & print for easy printing both on A3 & A4
PLEASE UPLOAD THIS TYPE OF DRAWINGS MORE USE FULL . SO PLEASE REQUIRED ANY PAYMENT ALSO I WILL PROVIDE (MORE TOOLS HAVE TO USE (SPECIFIC))
soma sundram
You can send me via mail...
Kamtekaranket@gmail.com
Ye advance level ki 2D drawings he ?
What is the meaning of pcd ?
Pitch circle diameter
zoom करनेपर tangent और दोनो circle के बिछ थोड़ा Gap दिखाई देता है ईस error को ठीक कैसे करे, इसपर कोई विडिओ बना सकते हो तुम! मुझे बहुत दिनोंसे ये प्रोबलम आ रही है। इसका कोई तो सोल्युशन होंगा ना।
My diameter 20 is so big, but you draw small size . how?
Check you enter value is Radius Or Diameter of the circle....
Please tell me how to solve this problem
@@TheRisingSun-INDIA
In circle command type unit value as Radius ..if you have to enter diameter value .. so type D for Diameter Press enter key out diameter value
@@TheRisingSun-INDIA
ua-cam.com/video/VAUSlYvYyMo/v-deo.html
Plzz teach with audio
Diamension???? Incomplete drawing
This Drawing without Dimensions...you will give dimensions with your created dimension style..