Supafend Marine Products

Supafend Marine Products
Supafend Dock Wheels
Make docking easier & safer. Protect and guide your boat against marina corners during sudden wind shifts or tidal currents!
Supafend Dock Wheels are designed to protect and guide your boat while maneuvering in and out of your marina berth. Our latest "Fit & Forget" FOAM-FILLED design is a considerable upgrade of our time-proven dock wheel that was first introduced back in 1999.
Supafend Dock Wheels are best located on the corner or "blind spot" and many boat owners are also locating them at intervals up the length of their marina. Their capacity to protect and move with your boat is unrivaled. "The ultimate protection against sudden wind shifts and tidal currents." They are especially useful for vessels with limited steering control during berthing.
Our new and improved Dock Wheel Hubs are completely maintenance-free. They are made of high-impact grade Nylon that will not corrode or crack and do not require bearings, bushings or any form of lubrication. They will not seize against the axle.
Supafend Dock Fenders
Protect your craft from costly damage and make docking easier & safer. Supafend® Dock Fenders transform hazardous wharf edges into soft safe zones.
Supafend Dock Fenders are "one-piece" rotationally molded, manufactured from the same exceptionally strong UV stabilized, non-marking PVC material used in our Dock Wheel. They now have a longer, slimmer design incorporating eleven lugs for permanent fixing with stainless steel TEK screws supplied with each fender. They can be placed end to end for maximum protection, but can be spaced apart at any desired distance (we recommend not exceeding a 500mm gap between each fender). Fixing is easy with the use of only light hand tools. The TEK screws are self-drilling and self-tapping which facilitates quick installation.
Supafend Dock Fenders have a new low-pressure design that has been tested and proven in a high traffic docking environment (a refueling pontoon) for over 12 months involving vessels up to 78 tonnes with no failures whatsoever. Its internal pressure (and resistance) progressively increases upon any hull roll-on or contact, but remains relatively stress-free until then. This provides dependable, long-lasting marina protection - at the right price!
Supafend Corner Fenders
Compliments our straight fender design. Corner fenders however, have to absorb concentrated impacts over a smaller area which requires our "foam-filled" technology. Supafend® Corner Fenders are injected with the same foam formulation used in our Dock Wheels, exclusively developed for Supafend by a world-leading company specializing in closed-cell PU foam. These corner fenders provide uniform and continuous fendering along your marina berth when fitted together with our new Straight Dock Fenders.
Supafend Boat Fenders
Protect your hull sides with Supafend Boat Fenders! They provide soft and safe barriers against unfendered marina walers and other moored vessels.
Supafend Boat Fenders are "one-piece" rotationally molded with non-marking and UV stabilized marine grade PVC. They are built tough to last with consistent wall thickness and specially designed extra-heavy-duty rope eyelet ends. All fenders are factory tested prior to dispatch to ensure they provide maximum fendering durability and reliability. They utilize the same inflation valves and low-pressure design technology which have been tested and proven successfully in our Supafend® Straight Dock Fenders.

[@januzportz7367]

A silly question, does this float on water?