Mark 2 Captain America Shield DIY Build
Вставка
- Опубліковано 27 сер 2024
- Sorry but website with templates and plans is now down thanks to hackers and running costs.
This is the build for my Mark 2 Captain America shield that you may have seen destroyed when I posted that video a while ago. And, so its easier to build, and cheaper to make for those in the USA I used a Flexi flyer sled like the one below.
WARNING!!!
Copying anything you see in this video or on the website is done at your own risk entirely, the purpose of the video is to entertain and educate.
Thanks for the tutorial mate.
LMAOOO
PLSSSSS
HEY YOU DON'T DESERVE TO BE CAPTAIN AMERICA! GO BACK TO THE MILITARY, OH WAIT YOU GOT DISCHARGED. HAHAHAHAHAHAHAHA
@@BlueC0rd dude chill the fck out is just a parody account, i don´t know if you know john walker is a ficcional character, he can´t hear you
Tip: when cutting fiberglass always wear safety goggles and a face mask. Dont want particles of glass in your lungs!
*It also helps if your friend is a billionaire, genius, play-boy, philanthropist.
It aslo helps capitain America
Still wont be made by Vibranium... Cuz it doesnt exist
pepperbotn Or dOesss it
chezboi i dunmo
iron man dies
Well looky here... this guy made my shield!
Nah
Its not your shield
@@treeckogo2375 r/woooshhh
xD
R/woooshhh
This channel is so underrated
i just used the metal sheild and the fiberglass to add dimension thickness that tappered out to the edge and for the bolts . I went with the comics original concept. where the bolts were set up differently for wearing on your back . great job like to see you build a sheild that has depth that tappers to the center . it will have a greater range if thrown . due to the added thickness. have fun enjoy your vids
John walker saw this
That sad moment when you live in Florida and they don’t sell these at all. 😭
buy off of amazon
I wonder if keeping the mold you had on the shield and seccuring it somehow would make it even stronger. You'd have the fiber glass as a back plate to the aluminum and than the aluminum to take the first strike. Plus if you made it removable somehow you could replace it quite easy.
Hi, would it be possible to add a list of everything needed to build this? (screws, what type, lengths, etc, washer, tools, everything...) so i don't run into any issue of "oh i didnt think about that when i try to build this? :)
a red or grey gelcoat before the resin would give a nearly mirror finish and cut down on painting . also I feel, speaking from experience, those nuts would eventually break out. a large washer held on with a nut would give a much stronger fixing.
At the start of the video, i thought you were gonna use the sled, but this is just as cool.
If anyone can’t afford the fibreglass CSM or the resin, you can just get the flexible flyer like he uses for the mold, it’s actually made out of metal even though it looks like plastic, so you could just remove the paint from the flexible flyer and then you would have a metal shield.
Yes you could but it is pretty thin and easy to dent
i legit made it! I got the flyer at ebay
Ari Chang WOW THATS EPIC
AWESOME!!! Could you try making Thor's hammer?
I'll build one next year.
Can't wait!
When you make it will it be able to electrocute or produce electricity
Yeah, that would be awesome!
Griffin Studios
just to help out the sheild has thickness in the center that tappers out to the edge . your use of fiberglass is easy to do to build that thickness .
but i think its really a great design makeover and i love it thanks for sharing.
Use the flexible flyer as the shield with some bracing.
Brainfoo TV, I got one question :
Why can't you just use that sled to make the shield ( I mean, just fix belt on the concave side and paint the convex side red white and blue and fix the star) it would be a LOT easier if you don't have fiberglass,csm and even resin
I've never made one but i think it might be a heavier than the one he made.
@@drivenbypassion3634 the sled is plastic so it will not be so heavy. If I used resin it might be heavier than the original sled
@@durgakarthik3984 i looked up the sled on amazon, its made out of metal. so i think the resin would weigh less.
durga karthik I own the sled; it’s made of metal. It’s not very durable though. It’s also prone to easy dents. It makes the shield heavier but also, using the sled itself as the shield would mean that it would also be prone to dents. It’s no vibranium but the fiber glass mimics vibranium in that it makes the shield lightweight, durable, strong, and flexible.
Evan Rogers does it absorb kinetic energy
Hi Brainfoo TV
Do you custom made it and sell?
If you do ,i can get order for you.
Sorry, I'm too busy working on other stuff. Someone ought to sell the blank shields unpainted.
What would happen if instead of trying to use the sled cutout as a mold, you encased the steel mold in the fiberglass making it a part of the shield. I understand this would make it very heavy but it would increase its durability by a lot. I think it would be a cool idea to try out and then attempt to destroy.
Not as strong because it will dent but its way cheaper than all that fibreglass
Wow. I love this. i want to make this for my daughter. and can you make a DOCTOR STRANGE pendant?
Thanks. I'm not really good at jewelry making, although I've always fancied a go.
Would this do good for a Christmas present?
😆😂😆😂😆😂
Pro ZombieYT I bet it would! This shield is amazing!
Tippo Da Hippo an especially great gift for D.C lovers
I meant marvel
Gamer Rager nah you were right the first time! get it for a DC fan and laugh at their reaction! ;)
This is really cool and everything, BUT this is way too much for a DIY and is really hard to do, and cost a lot for materials. Make an easy one for all of our sake please!
MetalPizza501 .honestly, fibre-glassing is dead easy as long as you follow instructions. you'd be surprised. what it is, is quite pricey. those materials aren't cheap.
MetalPizza501 step one buy a sled. Step two paint it. Well done you made a shield!
MetalPizza501 I agree
No, sled is 20$ and fiberglass is cheap where i live, resin is cheap too and wood is also cheap! Probobly the cost it 70 dollars
That's pretty cool! Can you make a REAL metal shield?
I could but I dont really see the benefit TBH. To get the same sort of strength, I'd have to go really thick with aluminium or steel (heavy), or spend about £1200 + on Titanium + Metalworking costs. And then I'm going to end up where I started maybee.
Maybe you can use satellite dish. That will be much cheaper than metal working and titanium.
You could also use a Flexible flyer shield like here : ua-cam.com/video/2Wg8Ch6L_-Y/v-deo.html
The trouble is you end up with sharp edges, and something that is overly flexible and will bend. Whilst it's still a cool build, It will definitely not take the abuse I throw at it in my other video though : ua-cam.com/video/JnzaevBO6B4/v-deo.html
you could just back a plate of steel with a fiber glass sheild
Berkcan Duruk hi
y'a know, the paint should be matte. still looks great!
Me:damn I can't find carbyne
(Look up what carbyne is)
Flaming Reaper nice
That's really well made, looks great!
Ayy you got the Halfords primer
That shit is perfect
all you need are some sweet dj skills
Amazing build... enjoyed the video!
All I have to say is that this video was awesome!!
Noted that it’s not a toy but a protection object thank u for your warning
What about 2 flying sleds bolted with an Oreo layer of DIY kevlar?
Captain americas shield was made out of a form of metal, but since that metal doesn't exist in the real world, try an aluminium version, denting is better than splitting!
Thanks...now I can make one for me
I want one so bad
John Walker in his garage right now:
I need one of these! Guess I'll have to DIY.
🇺🇸🇺🇸🇺🇸When captain America throws his mighty shiiiiiield, all those who chose to oppose his shield must yiiiiiield,🇺🇸🇺🇸🇺🇸🇺🇸
Hey if your a little kid and you want to do this just use the mold that he used as the shield and decorate instead of doing all the steps (thank me later)
Well you don't have to be a little kid, it's just that you people don't have these all the tools that he has useless your a hardware worker
Or, Take a quick drive to the hardware store..
5:13 when you think some one is a person that doesn't curse but u get proved wrong in less than 6 mins... lel
he did cuss dumbass
Awesome build. Too bad I'm a lazy sod with two left thumbs though.
Cool can you make the Arc reactor
The best youtuber
what if you wanted more strength? could you somehow attach the steel sled the the fiberglass?
The sled is still so just glue both
Calls it smaller except that the shield has a 24 inch diameter in the movies.
Are there different kinds of CSM? When I try to spin the compass with pencil or marker it just pulls the strands and leaves no marks. I got 1.5oz
I was like, wait what was the metal sled for, I thought the shield was going to be metal🤣
Should consider selling these to help fund the channel now that youtube seem intent of screwing over creators out of ad revenue.
Hi. Nice job. Quick question though. do you use any hardener with the Bondo raisin ? Thanks to answer and keep up with the nice work.
When you spend all this time watching this knowing that you'll never get around to doing this
Really cool and looks exactly the real👍
why not just fill the holes at the edge and use the full size ? while working on the front, cut in the circular grooves to give a more realistic look instead of all flat, also build up the inside to give a thicker look when the straps and hardware are added.
Could you do a rectangulour shield with a viewing port like a anti riot shield with kevlar
That would be
Tough as hell
Cool as hell
And fun as hell
dude this is awesome
build one out of 5 layers of fiber glass and send it to demolition ranch to see if a pistol caliber can penetrate it :)
Lighter fluid also vets of labled and stickers very well
Nicely done
Have you considered making a Captain America shield to try to beat the Thor hammer?
Is it bullet proof??
Asking the rEAL questions
What caliber? .22 maybe anything else who knows
Did you use resin hardener? If yes did you just apply one layer or one layer after you finished the resin for one layer
I like your kid he is really cool
You should sell those ready
If you somehow added tons of truck bed liner it would be tough as hell!!
When I told a friend from work whose background is in composites that I might make this he told me that the resin might contract while it was curing and pop off the mold. Have you ever noticed that happening?
I made this from soda can,it looks very cool
But I can’t make like yours
Try making the new cap's shield
John Walker: Interesting 🤔
Nice video I have the captain america shield
you should make a 10 or 20 layer shield so it can live though thor's hammer
Damn. Those veins tho
Wow man, this is totally amazing!
Cover the shield with Line-X and it would be stronger than the 1st shield
I already had the sled when I watched this
Now all you have to do is go buy $200 of resin.
It’d still be possible to make the shield without cutting the mold down to size would’nt it? Albeit a little harder but still do-able. Might save some time if it works
Did you ever find the answer to this? I was about to try the same thing. Why do you feel it would be more difficult to make without cutting down to size?
Would you sell it
Steven Hawking is replacing Albert Einstein in idioms as well!
Bucket_head r.i.p Steven hawking
You should try using real metal instead of using plastic
I realize you made this comment 4 years ago but I would just like to say fiberglass is not plastic and is also extremely strong and relatively bullet resistant but if he did make it out of metal and wanted it to have the same strength as this one it would be pretty heavy not to mention expensive and hard to make.
Hey how come iron man didn't make a shield out of the same metal as captain Americans shield
This is great. Absolutely phenominal. You have my pricing resin out as we speak!
Does anyone have any other recommendations for molds? I like the idea of using a sled, but I really want to make one full size (2.5 feet). Are there any sleds big enough to work for this?
Do you have to use a metal sled or could a plastic one work? I only want to make 1-2 shields.
Him: we’ve just created double sided duck tape well done us
Me: likes and subscribes
Nice shield, I wonder how many layers will it take to make it bullet proof, lol.
tasty sharp edges :O
Try Doing a 10 Layer i dont if it makes it make stronger but I hope so
do u need to make it on some thing
metal
I can't do this even one day
Dear BrainfooTV, have you got any ideas on how you would make the grooves in the lines so it's not just a flat shield?
Yes I would use a dremel with a depth stop attached to a compass arm.
do you sell these?
Thank you this was so helpful
can you just use the flexible flyer and do all yhe other stuff on the sheild without the fiber glass stuff
Yeah of course, but it's nowhere near the strength
Super cool
I love your work so much
I didnt really think about making such things to be honest, but If I get more subscribers and people want that sort of video I might make stuff like that. Would you want higher end builds like colin furze, or a mid road build that is easier to do at home but not quite as swish? Every time you bring out a welder and servos most people can't do that if you know what I mean, although it's cool to look at.
BrainfooTV I personally would rather do midroad builds because I don't have a welder haha. And agreed, it's cool to look at, but maybe easier builds? And thank you for replying!
Thats what I'm thinking. Before I start on more of these sort of builds I will wait for more subs or I will not be able to afford better builds.
that makes a lot of sense haha, well either way I love your work and keep up the awesomeness!!
would adding more layers, say 6-7make it stronger or have a neg effect like too much weight etc
Yes I would definitely make it stronger, but slightly heavier. The version in the destruction video is the MK2 which is only 4 layers, it would take 6 very easily. The MK1 had 5 layers and it's still light.
BrainfooTV thanks for responding so fast. If I make one I'll prob try five
Just tried a 7 layer one if you're wondering, 5 with 450gram CSm and 2 with 600gram. It is definitely heavier but is a lot stronger! Doesn't flex when I step on it compared with my 4 layer 600gram CSM
I also made a thick one as an early prototype, I know what you're saying Soooo strong. I made it for my son and he couldn't lift it Lool
How would you get the fibreglass in northern England
The video cool but you could’ve just use that red thing as the shield
This man took marvel too seriously.😂😂
Rohan Tolani
You obviously aren't a fan or a true fan 😐😕
Fanandnerdgirl 12
Princess Liea Organda f u
F. G. E. No, fuck you.
now make the hylian sheild from legenda of zelda
I live in the UK, and The shield is £35 plus £40 for import and delivery, can you get the sled anywhere else?