Eduard

Поділитися
Вставка
  • Опубліковано 9 січ 2025

КОМЕНТАРІ • 18

  • @jeremyalam480
    @jeremyalam480 5 місяців тому +1

    Pretty good job, Dan. Pity about the silvering-one way to deal with this is to smear some Tamiya Extra Thin on the offending areas to dissolve them. Go easy on the amount as you don't want to dissolve the paint, but I've found it an effective way to mostly fix the problem. To avoid the issue, always apply a gloss clear coat before you apply the decals.

    • @TheDanCave
      @TheDanCave  5 місяців тому

      Gloss coat is not needed in my opinion. Have done both over the years and silvering will occur with both. My suspicion is silvering is caused by lack of adhesive.

  • @scaleffect
    @scaleffect 5 місяців тому

    Outstanding work. I've never seen a wash sprayed through an airbrush before, that's a great idea!

    • @TheDanCave
      @TheDanCave  5 місяців тому

      Thank you, it can be a little extreme but it does get the wash down in all the right areas.

  • @DorkasaurusfluffyRex
    @DorkasaurusfluffyRex 5 місяців тому

    Looks great 👍 well done

  • @wordenb1830
    @wordenb1830 5 місяців тому

    Nice job Dan, don't beat yourself up over the decals, they don't look that bad! I do find that a gloss clear coat helps when decaling over water/alcohol based acrylics but not necessary over laquers when sprayed wet. Anyway good to see a plane again even if it was large scale!Take care man.

    • @TheDanCave
      @TheDanCave  5 місяців тому +1

      Thanks Worden. I've not done a gloss before decals for many years, and put decals down over many surfaces and paints. I personally think silvering is just where the decals adhesive is lacking. I will be experimenting with Tamiya decals adhesive and UMP decal fix soon to gain some more data.

  • @lesthiele4921
    @lesthiele4921 5 місяців тому

    Hi Dan, the Me-109 turned out perfectly, you were certainly persistent with the decals, I would have tjought being Eduard they would have been better, congratulations on a job very well done, best regards from a Kiwi living in Australia, Les

    • @TheDanCave
      @TheDanCave  5 місяців тому

      Thanks, a little bit surprised by the Eduard decals. I'll have to buy some more to experiment - at least that will be my excuse.

  • @markshellard5894
    @markshellard5894 5 місяців тому

    Nice 👌🏻

  • @xWILZTAx
    @xWILZTAx 5 місяців тому +1

    Dont understand how you went wrong with the decals, eduards are the best in the biz. Definitely gloss varnish before hand though.

    • @TheDanCave
      @TheDanCave  5 місяців тому +1

      Thanks, was very surprised myself. However, don't think gloss would change anything.

    • @xWILZTAx
      @xWILZTAx 5 місяців тому +1

      @@TheDanCave the only time ive had silvering is the only time ive not glossed. 🤷

    • @TheDanCave
      @TheDanCave  5 місяців тому

      Ah but never forget correlation does not mean causation.

  • @shropshire1233
    @shropshire1233 4 місяці тому

    Were the decals the new Eduard ones with the removable cover film? It is a pain but it is possible to remove the cover film. A quick search here on UA-cam will find various ways of removing. I’ve had success with using white spirit.

    • @TheDanCave
      @TheDanCave  4 місяці тому

      Sadly not the new ones. The kit is the 2016 boxing so has the normal decals - which are normally good.