I sure hope that Santa Claus is watching , and sees just how bad you need drill bits for Christmas this year!! Cool ideas man! Thanks for sharing! I gave you a BIG THUMBS UP! GOD BLESS!
Nais kopong makasama uli lahat ng bomoto saakin na naniniwala sa mga programa ko ibaba ng 50% up to 80% ang ginagamit ng pagluluto ng bawat pamilya ng tahanan. Ngayon po ito na KALAN USED OIL po,maghapon magdamag supper tipid nais kong lahat makatipid kontra LPG,gasolina, kirosen,dahil subrang taas na lahat ng mga bilihin.
Hola soy de argentina y me pregunto no hay un argentino que le demuestre a estos que no es asi de facil y vamos muchachos hagan uno que si anda bien y que sea industria bien Argento!!
To all viewers, please be careful in doing such projects using an old flammable gas tank material. The residual gas inside might explode when spark is produced during cutting.
Crude construction but very effective is what I would say! It could use much better construction practices and better refinement but how is this burning of oil emitting these kinds of gases that you would ordinarily see such as with the use of propane that gives us the clean blue flame that is most common to the use of propane or natural gases???
because the flame of a gas stove is a premixed combustion, basically the fuel is already mixed with air before it combusts. This makes sure that there’s no rich areas of fuel, which cause incompletely combustion, causing soot and a yellow flame. Basically, blue flames mean very clean/complete combustion (very hot), while yellow flames mean incomplete combustion (less heat and more soot).
.@@creativeinnovationideas Don't believe it research it because I went to school for concrete work and it is sometimes used in cold climates as antifreeze but it definitely weaken the psi strength
Unsafe pa rin, try mo patakan tubig kung ano reaction.ng apoy, mas maganda jan kung may takip ang chamber o ang burner kasi .magliliyab yan pag napatakn ng tubig
At 9 minutes into the video it doesn't show what air pump or fan was used to blow air through the pipe and the holes in the burner. That's the way it works I understand but why not show what forced air method?
These burners have a big problem, namely that they cannot be cleaned of the deposits from the burnt car oil.but probably if it works with used cooking oil, the deposits will be smaller
So the oil is just used like an oil lamp or something? The burner is just an air supply? I thought the oil would be pressurized or at least continuously fed and through the burner and burn like any other fuel. Looks like you just threw oil in a rocket stove and hoped that paper and sticks would eventually ignite it.
nice one idol watching from Philippines
Thank you for visiting 😊
Galing Naman gumawa Ng kalan na langnges
Thank you
Nice galing gumawa ng kalan di langis,good job!😊
Thank you 👍
well done, it turns out very well, it's very pleasant to watch
Thank you
I sure hope that Santa Claus is watching , and sees just how bad you need drill bits for Christmas this year!! Cool ideas man! Thanks for sharing! I gave you a BIG THUMBS UP! GOD BLESS!
The best lodz. Makakatipid talaga sa LPG o kuryente! 👍👍
Thank you 🙏
24:43 ni no😮@@creativeinnovationideas
Nice one DOL THANK you for sharing ,👍🥰
Thank you too
is it posible to use used cooking oil instead of petroleum. petroleum fume when burning is cancerous. and no tar residue
Akayy mantap terimakasih banyak atas ilmunya dan pengalaman x semoga bermanfaat
Thanks for watching
I am watching and learning how to do it. I wanted to try to make one😊
Go for it!❤️
Nais kopong makasama uli lahat ng bomoto saakin na naniniwala sa mga programa ko ibaba ng 50% up to 80% ang ginagamit ng pagluluto ng bawat pamilya ng tahanan.
Ngayon po ito na KALAN USED OIL po,maghapon magdamag supper tipid nais kong lahat makatipid kontra LPG,gasolina, kirosen,dahil subrang taas na lahat ng mga bilihin.
Thank you
wow! Amazing bro❤
Thanks 🔥
Gracias 👍👍👍🇻🇪
Appreciated 😊
Astig ng gloves mo idol meron ba niyan sa shopee😂😂😂
Thank you for watching
I like ur diy berry cool
Many thanks to you my friend,
Ordet
U R GREAT INVENTOR
MANY thanks 👍
Hi idol i'm here in jupiter 🪐 watching you.👽
Thanks for coming
Ive got a lot of old propane tanks i can use, but where do you find the burners from?
Junk shops
Thanks 👍
Welcome
wow nice good idea new friend amazing wow.sending my full support host.tamsak done at dikit fullpack kalimbang all. kasano from pilipines
Thank you my friend ☺️
Thanks cuz It really helped a project i was already working on
Great!
Just found your channel and Subscribed. Very nice work
Thank you 👍
Ferry nice👍
Thanks for the visit
galing talaga Ng pinoy kailangan Lang ang suporta Ng governo para mapa lawat pa ang Ka laman Ng pinoy 🙏🙏🙏
thank you❤
Gayahin ko ito lodz pramis
I'm glad you like it ☺️
Verry good,sukses
Appreciate 👍
Can you make another where oil and air are integrated.morev power bro
I'll try my best 👍 keep in touch
آخر واحد هو الأفضل👍🏻
Thank you 🙏
Assistindo aqui de Long Beach California
Hello thank you for visiting ☺️
Yan ang gamit nmin sa pagluluto hinihingi ko lang sa mga kaibigan ko yung pinag change oil lan
Thank for sharing
Nakakasira ata sa kalusugan yan
you missed the part about welding the cap on the back with the threaded pipe? y?
Amoy krudo yung niluluto
Hola soy de argentina y me pregunto no hay un argentino que le demuestre a estos que no es asi de facil y vamos muchachos hagan uno que si anda bien y que sea industria bien Argento!!
Very simple to cook
Thanks a lot
😊😊
on the first one.... are you blowing air into thru the larger pipe you installed into the burner ring... or is it sucking its own air in?
Yes sir
@@creativeinnovationideas❤❤❤❤❤
Best oil stove # 1
Good choice
Boss Anu taas ng chamber mula sa flooring
9 cm my friend
Sama samahin natin mga gumagawa Ng kalan use oil
Thank you for watching
Whitch used oil you use idol? Cooking oil or car used oil?
Both
Aonde eu compro essa ventoinha?
Online shops
Can you control degree of flame?
yes by using controller
To all viewers, please be careful in doing such projects using an old flammable gas tank material. The residual gas inside might explode when spark is produced during cutting.
I usually fill them with water before drilling/grinding just to be safe.
Luckily he's wearing his safety gloves.
mmlso new friend diy fabrication
Appreciate 👍
Paano papatayin iyan? Sana magawa mo din ang hydro water stove mas malinis at safe pa.
Nagbebenta kaba sir ng gawa mong de use oil tnx sa reply at magkano poh.
Thank you for like the project but all my project is for giving ideas
Good thing you had your gloves on. I mean they look to do alot of good.
Appreciated thank you 👍
How much oil required for 1 hour burning
500ml
kay galing naman
Thank you
amazing
Glad you think so!
Amazing
Thank you! Cheers!
Nice
Thanks
Crude construction but very effective is what I would say! It could use much better construction practices and better
refinement but how is this burning of oil emitting these kinds of gases that you would ordinarily see such as with the
use of propane that gives us the clean blue flame that is most common to the use of propane or natural gases???
because the flame of a gas stove is a premixed combustion, basically the fuel is already mixed with air before it combusts. This makes sure that there’s no rich areas of fuel, which cause incompletely combustion, causing soot and a yellow flame.
Basically, blue flames mean very clean/complete combustion (very hot), while yellow flames mean incomplete combustion (less heat and more soot).
Bro good, something is better than nothing.go head.
HOLE SAW... but I must say you can cut a nice round hole with that grinder
Thank you
Magkano naman po kung magpapagawa ?
For content only my friend
Luckily he's wearing his safety gloves.
Thank you
Induction is best I think because fan we need electric and though it's use oil but need oil if no oil no flame
Bilhin ko nalang gawsa mo brod
Thank you my friend
tag pila na boss pwde order ko
Not available my friend
pag saba na ok order ko
Hello boss magkano pagawa order ako
How to clean the last unburned residue in the furnace?
there is almost nothing left inside if the fire is used up, so there is no need to clean it,
It appears the oil supply valve is turned off.... So where is the fuel coming from?
there is only the right level of oil that can be put inside the chamber and it takes 10 to 15 minutes
Suggestion mix dish soap in your cement & it will make your projects lighter with no loss in durability
Thanks for the tip
.@@creativeinnovationideas Don't believe it research it because I went to school for concrete work and it is sometimes used in cold climates as antifreeze but it definitely weaken the psi strength
What is the milage (working duration ) of the one litter used oil? Please reply me. 🙏🙏🙏🎉🎉
Unsafe pa rin, try mo patakan tubig kung ano reaction.ng apoy, mas maganda jan kung may takip ang chamber o ang burner kasi .magliliyab yan pag napatakn ng tubig
bosing poyding bumiki Po ? magkano Po bayan?
No
Bili ka ng gloves para sa safety mo.😂😂😂😂
Thanks 👍
What cutoff wheel skills
Thank you
At 9 minutes into the video it doesn't show what air pump or fan was used to blow air through the pipe and the holes in the burner. That's the way it works I understand but why not show what forced air method?
No 1 is best
Try it 👌
What's if the table wasn't level? 😂👍
Thank you for watching 😊
a primeira ja é uma fraude ele ta usando gás no cano de baixo, a proposito todos estão recebendo gás , ou seja fraude em todas 😁🤣🤣🤣🤣🤣🤣🤣
Saan pwde bumili boss
Hi, thank you for watching
Редко встретишь напрасно потраченное время,
Da buat flower dari bawah ke aras ini flower dari samping pake t dear ada gk beda kerja flower daruuai bawah keatas dan apa beda flower dari sampin8ng
T is good, used 3mm & 1.5mm
Ggo k pla iba pnkta s. Lrawan. Tpos ngttabas kpa
What type of oil waste ? It is that of gas?
Used engine oil
@@creativeinnovationideasis it safe or carcinogenic?
I had to turn it orff because the muzak was shite and soe were the diy technics !
whats the point , still using woods?
For me much better mix with woods because it is natural burning mechanism
Valeu
Thanks for watching
New Glove Trend ?
😅 thank you for watching
These burners have a big problem, namely that they cannot be cleaned of the deposits from the burnt car oil.but probably if it works with used cooking oil, the deposits will be smaller
So the oil is just used like an oil lamp or something? The burner is just an air supply? I thought the oil would be pressurized or at least continuously fed and through the burner and burn like any other fuel. Looks like you just threw oil in a rocket stove and hoped that paper and sticks would eventually ignite it.
You should try with oil dripper instead you could have constant feed of oil and ne need to refill all the time
Thank you for advise
Magkano po ganyan???
Not available
Please I need text to corroborates my knowledge on this waste oil frabrication
Thank you for visiting
Hindi po b,lumalasa sa pagkain Ang gatong nyan
hindi po
Benta mo #1
ithank you for watching
Why the pipes? Shalom you're loved 💔
Intersted
Great 👍
Apparently these guys never heard of whole Saws.
Thank you for watching
hole saws
They're using half saws instead... not as efficient as a "Whole" saw though. 🤣🤣
nice gloves lol
Цемент от перегрева взрывается
Wow
Thank you for watching ☺️
Almost anything cast iron should be coated in oil and baked in an oven at 350 degrees for 15 min… imho
Like you
☺️
idol ok sana po yong imbento nyo kaso hindi po yan advisable sa health ng tao kasi yong usok ng langis nakaka cancer po yan
magkano inaabot ng kunsumo ng kuryente
Same consumption while charging mobile phones
Needless annoying music. Thank goodness for mute button. If you MUST have music, at least make it pleasant to listen to.
Thank you for advise
Really? U rather it b Jay z or Bad Bunny 🤣🤣🤣🤣👌
Yep pure garbage. Keep that crap to yourself. We don’t want to hear it.
@@MrFlycookit wasn’t?
no no no❤ I'm@@creativeinnovationideas
What's the point in having those gloves on nothing left of them
I don't have a budget yet so I'm just persevering first