PROGRAMMING DIXELL XR60CX FROM DEFAULT TO FREEZER AND CHILLER SETTINGS (ENGLISH)
Вставка
- Опубліковано 22 сер 2024
- Join me guys in programming this newly bought Dixell xr60cx a digital control of commercial refrigerators .
And this is a reupload for English speaking viewers.
#Dixellxr69cx
#DigitalControlOfRefrigerator
The author is a top notcher in Consumer Electronics and in Refrigeration and Air-conditioning, a certified welder (smaw),
Auto diesel Mechanic, Cellular Phone Technician and an Experienced Computer Technician.
My RAC tutorial videos:
• Tutorials on Refrigera...
My basic electronic tutorials:
• Basic electronics
My Diy crafts videos:
• Diy Crafts
My dixell programming and pcb repairs:
• Aircon & Refrigeration...
My Vlogging tips:
• Blogging tips
Funniest Comedy Videos
• Playlist - Наука та технологія
Follow all the parameters settings as i mentioned but let me correct the IDF which taught to me wrong. Just simply add 3 hours if you want your dixell to defrost every 3 hrs. Experience is the best teacher they said. To dig deeper just read the manual and we're not misled. Happy troubleshooting everyone ❤
I'm an "old school" tech and was beginning to think I would go back to pressure controls until I found your channel; Thank you for this tutorial- a great job, Sir.
Welcome sir, to God be the glory 🙏
I actually commented on another vid that showed me the exact information I have been looking for and asked you to make a vid like this one.
I have not seen the full 30 mins yet but I will once I get some time to. Appreciate you sir and this help really reduces my stress at work knowing there's an actual guide that can point me in the right direction and not feel as if I'm lost.
Same feelings sir when i first encountered dixell controller. But i read the manual and try to understand it then i found myself programming it and repairing once a component on tiny pcb got damaged.
3 mins video for youn first inquiry is coming up sir.....
@@THEMULTISKILLEDTECH yea my whole issue is the Manuel which came with the whole set up is missing so I've been really just looking for a needle in a haystack. I appreciate you taking the time to figure it out for the rest of us.
What is about to upload is a compressor cut in and cut off just remember this 2 parameters and you can modify your freezer to chiller and even to hot like egg incubator sir
ua-cam.com/video/E639nmcKQWs/v-deo.html sir here is the video
Hi there thanks for this vid, just would like to precise that the parameters LS and US are to restrict the maximum and minimum set point that you can programm, if you're working in a restaurant for example you wouldn't want any one to fiddel with the dixell and change the set point from -21 to +10 or even the other way to -50, seeming that the set point is accessible to everyone.
Yes , they can't easily change the settings but locking the keyboard is the best thing to do to protect its program from unauthorized 🤗
Hi, thanks for the video, I'm learning to set-up new controller for my customer.
Maybe you'll need these too my friend 👇👇👇ua-cam.com/play/PLOMYgMklNMhF8NP3aD97DgeB3pk_kJtFX.html
Love your way of explaining
Thank you sir
Thank you so much Sir.
Most welcome tuan
Very useful knowledge, good explanation and better understanding.
Just explore to my tutorials about control sir I tackled both programming, alarm fixing and pcb repair of different refrigeration controls 👇👇👇ua-cam.com/play/PLOMYgMklNMhF8NP3aD97DgeB3pk_kJtFX.html
Thank you for great video. Really appreciate it. Cheers
Your welcome sir. Try exploring about dixell, programming, alarm, and pcb repair too👇👇👇ua-cam.com/play/PLOMYgMklNMhETVnzUDCoHMpMOLQ5Wp95m.html
Thank you! very helpful video
Your welcome sir
thankyou soomuch bro❤
Welcome bro🤗
Hello, what an awesome, very well explained video, thank you. I am really battling to setup my pharmaceutical micro fridge. I need an operating range of 2°C to 8°C and no matter what I set, it keeps dropping to -1°C sometimes to -4°C. (Max +4°C with activity) I wait at least 48 hours to check trends. Do you have any suggestions?
ua-cam.com/video/VhXimDG6cfQ/v-deo.html the answer is here sir. Ty for asking
@@THEMULTISKILLEDTECH Thank you so very much! I really appreciate your response. I will try this and send feedback. Thank you again!
Your welcome sir hopefully the same control. Update me anytime sir🤗
Galing mo talaga Sir.. God bless you
Sir try mo send pictures sa fb page ko, (under comment section) about dun sa gusto mong idulog na control issue
@@THEMULTISKILLEDTECH bagong palit Sir yung Thermostat Egyptian ang nagkabit eh parang hindi naman yata naka setting, Ang Model ay Eliwell IC901 tapos sa harap ng control may nkalagay na -21+7°C... Ang nilalagay dyan vegetables at cake.. so Chiller ang dapat i setting siguro Sir
Chiller natin dir is 1-4°c pag sa food. Sundan mo eliwell id901 ko sir.
Setpoint 1°c
DIF 3°C
LSE 1°c
HSE 4°C
@@THEMULTISKILLEDTECH For example Sir naka lock sya pano unlock ulit i set mo lng ba sa N
ua-cam.com/video/IITlMcsXELg/v-deo.html yan sir pano ilock at unlock. Nakaplay list po mga tutorials ko sa about dixel, eliwell, dei, lae...pili ka lang sir ng gustoong matutunan.
Can I ask something..this controller..we have a relay switching for compressor
You can tap compressor output relay of the controller to your external relay's coil. I hope this all about your question
If i would like to set the Fct, then after setting the temperature difference to 4, the fans will not start even when two probe difference is 4C. What might be the problem? Thanks
And what is the value of your FST and FND sir? If FST set to 8°c while your FCt is 4°c it will not start fan motor sir
Value of fst is 50c and fnd is 0. I1p is oP and i1F is Htr as I am using controller for heating purposes.
I see, you used XR60CX fot heating, try entering fct to 80°c than set your fnc to OY
IF you can't still activate your fan, just plug in to terminal #8 that is NC and you don't need defrost operation coz your in heating mode. Or combine it to terminal #3 just use contactor to protect the 8 amps output relay of the controller. Good luck sir and God bless
Thanks for the video, really good info! Although I am having trouble getting the compressor differential to work. SP is at 38 F, HY is at 8 yet the compressor cuts in around 40 or 41 F. The compressor should be kicking in at 46 F, based on my configuration I've adjusted HY from the default of 4 to 6 as well and makes no difference. Is there a different parameter that might be overriding this? Thank you.
Adjust your SP to 38F and HY 8°c. Note: you can't change SP if US is higher value, check as well the LS
@@THEMULTISKILLEDTECH Here are my current settings, SP 38F, HY 8F, LS 38F, US 46F. The compressor cuts out at the Set Point of 38 without issues, it is just cutting in a bit earlier at 42F. Basically it is behaving as if the SP is set at 4 and not 8. Digital Controller set correctly, fridge is just not having or taking the right commands. Anyway to reset the Dixell back to factory default so I can start over?
There's no button to do reset sir. Do it manually and download the manual with you so you can restore it to default values.
Check also OT - O, CON - 15 and Lod - P1
@@THEMULTISKILLEDTECH That's terrible that there's no reset. You're configuring based on limited buttons, with only 2 letters display output. Im sure it's easy to accidentally set a setting when you're just browsing through the menu without being aware. Although I am now getting the differential to work properly. I guess it takes some time so after about 24 hours, the fridge is behaving like how I expected. My compressor is cutting in at the correct temperature based on my setting. Thank you!!
Your welcome sir, be cautious when browsing you might change parameters by accident, I've known some does that, in the end they replaced the control with easy to setup like stc 9200 of elitech. Luckily if I've recovery the control i restored what was faulty settings they did by accident
Can you confirm what IDF does. In the manual IDF = 3 means defrost every 3 hours. So over 24 hours it defrost 8 times.
3 means every 3 hrs Defrosting, in 24 hrs you have 8 Defrost
Just read and always follow the manual, for sure you will not be misled
After -5 the down button can't move .is it any set point inside programming
Change first US to your desire highest setpoint like -18, then change SETPOINT to -21, 3rd change LS now to -21
Hi. I believe your line connections are in parallel and in series
Yes series for control live and parallel for neutral sir
Thqnkyou
Your welcome sir
I installed this for cold room freezer -18c its forms ice formation in evaporator what's the issue
Defrost time not set properly perhaps sir. Try this out👇👇👇ua-cam.com/video/xq2l9_fjIK4/v-deo.html
Dear sir
We have Dixell CX40 controller on my machine control panel air conditioner .but compressor not started from controller i don't know what is problem and I don't have any idea about controller so please help me for how to check controller inside setting for compressor on signal.
ua-cam.com/video/9yMZH3wHmqg/v-deo.html try this hope you fix it by yourself
Thanks this helpfull how about eliwell how to reprogam
For eliwell id974:ua-cam.com/video/ZHKlBAXKwaY/v-deo.html
Eliwell ewpc901/N:ua-cam.com/video/-NnHh8lKlEs/v-deo.html
Eliwell iwc759 lx:ua-cam.com/video/vKsOPG-SALM/v-deo.html
All my control programming and alarm fixing listed here:ua-cam.com/play/PLOMYgMklNMhF8NP3aD97DgeB3pk_kJtFX.html
Hello sir meron kayo tutorial ng dixell xr02cx default to freezer set up , nag reset kasi settings mg freezer namin
Xr02cx ay pang chiller lang sir dahil ito ay walang defrost heater. Pero kung pamg chest freezer ok naman. ua-cam.com/play/PLOMYgMklNMhETVnzUDCoHMpMOLQ5Wp95m.html&si=_9MAknOD2I8XdaDI pili na lang po layo dyan sir. Mas related sya sa xr20cx
Hello sir..can u guide me how to change chiller to freezer..
Its in the video now sir. May sure your chiller have defrost heater
thank 4 the vidio, it's useful 4 me.
some question, what does it means of set point? my new equipment xr60ch US max set only till minus 5 degre C.
dpo parameter is it in minutes or hour.
Set point where the compressor stop when reached your desire lowest temperature sir. Minus 5 is the default.
Just copy what I did in my video sir and to explore more watch these and all your questions are discussed 👇👇👇ua-cam.com/play/PLOMYgMklNMhETVnzUDCoHMpMOLQ5Wp95m.html
DPO parameter is referring to IDF therefore it's aN hour not minutes sir
thank so much for explanation.
Im working on a walking cooler and i will install this control. In what terminal can I install the fan and the comp?
Because you told on the video that I have to move the fan to terminal 7 but i barely understood what you said.
Don't be confused my friend, what i adviced to sir taavi was a heater settings. Watch carefully the video as i had patiently discussed terminals orientation there based on cooling and freezing purposes.
Go to my channel's community and i posted there the terminal orientation as well as freezing and cooling settings. Good luck my friend!
Hi how to fix error Lt or LE on hk dixell controller
I'm sorry sir we don't have HK on all our controller. I program it manually
Sir gud day,, bago nyo ako followers,, paano ba mag balik sa normal set point
Ano po control nya sir? May gumalaw po ba?
Hi brother I to ask you when click button desfrost compressor not stop running
How to sep up?
Check parameter CCT if set to continues mode don't press manual defrost
Thank brother 🥰
Your welcome brother 😉
This video is for your question sir:
ua-cam.com/video/AXenafBcrzU/v-deo.html
How to chenge mode
All my dixell tutorials ua-cam.com/play/PLOMYgMklNMhETVnzUDCoHMpMOLQ5Wp95m.html choose a topic you want sir
Boss saan po nakakabili ng ganitong board?
Supplier namin dito buong dixell binebenta sir, kahit relay wala sila
4 doors frezzer hnd nya mareach yung setpt. na -18 katagalan may alarm sya na ha.
👉link for ha configuration sir ua-cam.com/video/bQmhRsoBcbs/v-deo.html
👉Link for ha alarm fixing sir ua-cam.com/video/nntAIPTv0nY/v-deo.html
Sir mayron kabang control diagram ng chiller or freezer
Pwede po natin gawan sir using dixell xr60cx
@@THEMULTISKILLEDTECH salamat Sir
@@THEMULTISKILLEDTECH ano ba messenger nyo Sir ipapakita ko lng yung thermostat na pilitan ng Egyptian hindi daw gumagana
TAHNK YOU IF I SET F"
Your welcome my friend. F"?
Defrost every 3 hours sounds a bit excessive
Yes, and not recommended for busy restaurant/mart....
Hi there. If I can ask you what is the main reason for a HA error on a freezer coldroom dixell controller ?
Google it sir i have a ready to watch tutorial about that
Chiller lng sya tapos ng bago naging freezer -24
Kasi kung walang gumalaw ay maaaring sira ang output relay ng compressor,