New Shop Space and Testing 3d printed honeycomb pen blanks
Вставка
- Опубліковано 2 жов 2024
- ETSY STORE LINK: www.etsy.com/s...
LinkTree: linktr.ee/KimT...
INSTAGRAM: / kimtippinwoodturning
FACEBOOK: / kimtippinwoodturning
My Email: 2COR517KT@gmail.com
PayPal Donations: www.paypal.me/...
Mail to:
PO BOX 10871
Brooksville, FL 34603
Products I use:
Total boat: use code: KimTippinTB www.totalboat.com/
Starbond: USE CODE :KTWT15 for 15% OFF bit.ly/2TDQurK
Mandrel
amzn.to/3qGshO8
PSI Woodworking CLTEZSETA EZ-Glide Pen Turner's 2pc Toolrest Set
amzn.to/3yoW40t
Carbide Woodturning Tool Mini Size (3 Piece Set)
amzn.to/3yidBXT
Micro-Mesh 2" Assortment Pack - 18 Pieces
amzn.to/3weI2gg
Stick Fast 291-2 CA Polish Gloss, 2 oz Capacity
amzn.to/3hzc2ht
PEN KITs
www.bereahardw...
PSI Woodworking CSC3000C Barracuda 2 Wood Lathe Key Chuck System
amzn.to/3xhnWU6
Pen Mill Set, 7 PC Pen Barrel Trimming System
amzn.to/2V62B1I
Laser Art by Bob: / laserartbycook
Branding Iron and Soldering Iron (Electric Handle)
www.custombran...
amzn.to/2SfzuV6
ARTEZA US: arteza.com/?ut...
ARTEZA UK: arteza.co.uk/?...
Turning Tools and Sharpening Equipment:
Bowl Gouges:
Carter and Son 5/8 Bowl Gouge:
carterandsonto...
amzn.to/2OS1AoO
amzn.to/2MqQq8R
amzn.to/2pxZyPP
Custom Handle for Gouges: Contact Mike at woodturningstuff@yahoo.com
Spindle & Roughing Gouges: (not to be confused with a bowl gouge!)
amzn.to/3f7wIf7
amzn.to/3lT2xdW
Parting tool: amzn.to/36IftNH
amzn.to/2UBtPJZ
Scrapers: amzn.to/36I9Qz3
Skews: amzn.to/3kGsooe
Hollowing System: wtwtim.com/
Coring System: www.packardwoo...
Abrasives Home (Sandpaper): abrasiveshome.r...
Wet sanding: amzn.to/2K7pvA7
Or : amzn.to/3f5pfgA
Sanding sealer ( Shellac & Denatured alcohol 50/50 mix)
amzn.to/2UziAl8
amzn.to/3nzE8e8
Brads Workbench Abrasive paste and Tung Wax: www.etsy.com/l...
NOVUS Plastic Polish:
amzn.to/33P9Bzd
How to make DIY abrasive paste:
• DIY Fast Abrasive Paste
Supplies for abrasive paste:
amzn.to/33XewOy
amzn.to/2pNvUpU
amzn.to/2N68G6z
amzn.to/2N6k7Lp
How to make OB Shine Juice:
• #89 O.B. Shine Juice
Frenchie's Polish:
60% Shellac
30% Denatured Alcohol
10% BLO (Boiled Linseed Oil)
Shellac / Denatured alcohol / Boiled linseed oil amzn.to/2pbq2af
amzn.to/35YT4uj
amzn.to/2W8Evj7
Wood Bowl Finish (Food Safe) : www.packardwoo...
Resin Finish: Total Boat (ktippin15) 15%off
Lust: www.totalboat.c... Halcyon: www.totalboat.c... Fast & Slow set resin: www.totalboat.c... AND www.totalboat.c...
RESIN SUPPLIES:
Pressure Pot Adaptor knobs: www.etsy.com/l...
Pressure Pot: www.harborfrei... 5 GAL. Pressure Pot: amzn.to/3g565d0 OR amzn.to/2KaREGw
Interference Pearl powders:
amzn.to/2Mpv1Nq
amzn.to/33x5nfk
Alcohol Inks: amzn.to/2ICjWJS
OTHER SHOP / TURNING TOOLS
Pohl Barn Chuck Tool: www.etsy.com/l...
LED light: amzn.to/2XtdrOs or two for less amzn.to/3b3TZMb
SAFTEY
Base Camp Dust Masks: amzn.to/35809t0 OR amzn.to/3nY4SpM
Face Shield: amzn.to/38QuvUf
TREND AIR/PRO Airshield and Faceshield : amzn.to/2UAxh7H
FILMING and EDITING
amzn.to/31jJZbS
amzn.to/2VSkLjz
filmora.wonder...
*Entertainment purposes only* Turn at your own risk!!
**As an Amazon Associate I earn from qualifying purchases**
Thank you for all you do to help support and encourage me to keep on turning :)
God bless!!!
Congratulations young lady you made the change.
Thank you so much 🤗
Wonderful to see you back Kim. I've missed you. You're not the only one who's not good at sharpening tools!! But the pens were lovely.
Thank you so much, Brenda 🤗
Every journey starts with a single step. You’re headed in the right direction. I thought your pens were awesome.
Thank you so much, Dale 🤗
Yay! Kim is back! You have been missed!
Awww Thank you so much 🤗
Great to see your videos again. Missed your face. Welcome back.
Thank you so much 🤗
Glad to see you back at it . Pens are beautiful
Thank you so much 🤗
Nice to see you turning again Kim. The pens look great.
The new shop is nice, pens are pretty.
Thank you so much 🤗
Indeed, welcome back. Turning bowls isn’t possible, but pen blanks. Tell us more please
I can still turn bowls just not as large as I was.
I started with pens because I have lots of kits and blanks. Thank you! I am glad to be back. 🤗
Woohoo! I missed you Kim!!!!! Beautiful pens!
Good to see you back! Pens look great
Good to see you back. Would you be willing to do a video showing how a 3D blank is created?
Thank you so much 🤗
I will ask my dad if he will allow me to film his process . I will for sure film the casting and turning 😁
Good to see you back to it. The pens look good to.
Ok super Kim. Hoppy fourth of July
Kim. Is the new house going to have a designated shop area for you ? The pens turned out awesome, glad to see you back on the horse.
Thank you!
Yes, but we have to wait till the house is built to build a shop. I will use the garage as a shop until the shop is done. Just starting the paperwork for the new house so we have a while till we even get close 🙃
Great to see you back in a shop Kim, pens look great also
Glad your back
Thank you, Doug!! 🤗
Thank you so much, Dave!
It's great to see you back in the shop Kim I like pens they look great👍👍👍👍👍
Thank you so much, Scott 🤗
GREAT to see you back Kim. Praying for you as you settle into your new space.
Thank you so much 🤗
Just remember Kim when you start building your new home the first priority is to build your new workshop right 👍👍
Pens came out great, Kim. Happy to see you adjusting to the temporary shop.
Thank you so much 🤗
Someone told me "just because you're struggling, doesn't mean you're failing." I think you probably know this already. Stick with it because we're sticking with you.
Yes!! !Thank you so much 🤗
The pens look really good. Glad to see you’re settling in and getting situated so that you can turn again, even if it is small projects. Good skill builders. Have fun. God bless.
You did a good job on the pens! I have recently started turning pens also, mostly because all I have is a (cheap Chinese) mini lathe and it just isn’t up to some of the things I was trying to do on it. The biggest secret to turning on the small lathes is to slow your roll and take light cuts. You’ll find your zen space soon enough :) God bless!
Thank you so much 🤗 You are so right!
Kim like Doug from Pohl Barn said, glad to see you back and pens look awesome. I would love the all silver one for the wife.
Thank you so much 🤗
I may start adding the ones I feel are good enough to my etsy shop soon. 😉
Welcome back and happy 4th of July ☺️ Those pens were really nice.
If pens drive you crazy, start looking around at all the non-large-bowl options. Boxes, vases, figures, wands, tops, clocks, etc. There are SO many more options on a small lathe than just pens!!!
Yes! many items I turned on my large lathe , I could also do on the smaller lathe. I have so many ideas. lol
Thank you so much 🤗
Great job Kim,hope you're having a happy 4th!👍👍👍👍👍👍👍👍👍👍👍👍👍
Thank you so much, Alan 🤗
I see nothing wrong with those pens Kim...they are nice and dainty for a smaller hand. Nice to see that for a change.
SWEETIE YOU ARE TO HARD ON YOURSELF THAT MAKES ME 😥 TO SEE YOU DO THAT TO YOUR SELF I'M SORRY BUT I JUST CAN'T HELP MYSELF FELLING YOUR PAIN YOU NEED TO LET UP A LITTLE YOU ARE SUCH A BEAUTIFUL WORME HEARTED YOUNG LADY AND GOT A WONDERFUL FAMILY I KNOW SOMETIMES IT'S HARD TO LET THINGS GO BUT YOU HAVE GOT TO BECAUSE IT WILL END UP BAD AND I OR YOUR FAMILY DON'T WANT THAT TO HAPPEN I'M NOT TRYING TO BE A BAD PERSON I'M JUST TRYING TO HELP THAT'S ALL I HOPE YOU AND YOUR FAMILY AND FRIENDS HAVE A WONDERFUL WEEKEND AND A LIFE FULL OF JOY GOD BLESS YOU AND YOUR FAMILY AND FRIENDS TAKE CARE AND STAY SAFE PEACE BE WITH YOU ALL AND BY THE WAY YOU DONE A SPECTACULAR AND AWESOME JOB ON THE PINS JUST LIKE ALWAYS KEEP UP THE FANTASTIC WOOD TURNING AND LET THE WOOD CHIPS KEEP FLYING LOOK UP TO THE HEAVENS I JUST HOPE I HAVEN'T SEAD ANYTHING TO UPSET YOU IN ANYWAY MY FRIEND I HOPE
We have missed you!! This pen came out awesome, loving the colors and honeycomb design!
Thank you so much 🤗
Very nice pens im new to your channel saw the shout out from the beard x16
Sorry I haven't got the flowers to u yet!! I will get them to u asap 🙏 I so can't wait to see what u do with'em
salam sehat sukses selalu 770
Yay...😁😁, you're back. Welcome back & they look great. Don't let anyone tell you different.
Thank you so much, Lyle 🤗
I am just catching up with your videos and this one disturbed me a little. You may not do pens all the time but, saying you do a bad job is like saying you are ugly. Neither statement could be further from the truth! Never demean your talents even if you don’t do something as often as another item. Those pens turned out very nice. You might not like pens as much as turning other things but, you a fine job on them. How does that lathe perform? I bought one 2 years ago them found pit I had to move and it’s still in the box. I did buy the Barracuda 4 for
It after Christmas. Keep turning and NO MORE NEGATIVE COMMENTS ON YOUR ABILITIES! ❤️
Thank you 🤗
Welcome Back Kim. We miss you a lot. May I Throw a Wrench at you? Well here Goes what you you Say if Your Fan Clubs Start a Fundraiser to Buy you a Big Shed for your New Work Shop? To Fans could we Start a PayPal account for Kim? I can give $50.00 to start? Kim you Need More Space and I am Sure with Prays and Hope we can help you. Dear Fans please VOTE so we can Tell Kim how We Care. God Bless You Kim. Greg
Lol. Thank you , Greg!
I will eventually build a new shop. I am blessed to have this space until then. I truly appreciate that 😁🤗
Welcome back. My Woodturning shop is 8x10 so you’ll make it work. I have a question. I’ve seen in your earlier videos that you occasionally use something besides total boat hardener when mixing up the resin pour but I can’t find the exact video. Do you use acetone or DNA? Thx
Thank you so much 🤗
To thin the resin I will mix the resin according to the directions, then add half the total amount of resin or acetone to the mixed resin. This helps the resin to soak in the the wood and slows down the cure time.
I hope that was what you were asking about 😉🤗😁
Yes, you are blessed...and talented! Those pens turned out awesome! The only question that I have is who the heck is NITTIP MIK? LOL Be safe, stay healthy and thank you for the video!
lol My backwards self.
Thank you so much 🤗
I agree, make the most with what you have.
I know moving is a real chore. Keep your chin up. It’s good to see you turning again. Happy Independence Day.
Romans 12:12
Thank you so much 🤗
Hi Kim, Nice to see you on YT again. Great t see you turning a couple of pens. They came out great. You'll be surprised what you can turn on that lathe. Looking forward to seeing more projects from you new space. Take care Kim and hope you had a great Independence Day. Cheers, Huw
Thank you so much, Huw 🤗
Happy to see ya Kim! 👍🤝🇺🇸 Have a Blessed evening and hope your 4th was amazing! I like the pens!
Thank you so much 🤗 I appreciate that!! ❤🤍💙
Great to see that you have this shop space at least so you can turn smaller projects. Pens look good also. I just moved house in February 2021 and had the same effect: its amazing how much has been collected in my old basement over the past 15 years. Especially stuff from my kids which grew up and moved out.
Thank you so much 🤗
So true! So much stuff!
It's good to see you back. I love your hat, very cool.
Happy 4th of July.
Earl
Connecticut
Thank you so much 🤗
Good 2 c u back. My brother's mate is using pen blanks for keyrings, 2 hold my big sister's ashes for my other sister's, niece, mum & me
Hi Linda!
That is a great idea. There are Keychain kits for that purpose.
So nice to see you Kim and your pens look great 👍🇬🇧🇬🇧🇬🇧
So good to see everyone (well tge comments) too.
Thank you so much 🤗
Happy 4th!..nice to see you back at it somewhat!🤓👍🏻👍🏻
Hi Mike!!! Thank you so much 🤗
So sorry to see that you have moved to a smaller shop. I must have missed some thing, as I was not aware that you were moving. I hope all is well with you and hopefully you will be back in a larger shop again soon. I have really enjoyed your videos ... Richard
Thank you! Yes, we moved. sold our home and building a new one. My dad made some space for me in his shop until mine is built. Happy to have a space for sure!
Kim it's always great to get a video from you and this video was fantastic. Its great to see you have settled into your new temporary shop and these turnings are beautiful 👍👍👍 ps hope you don't mind me saying but in this video it really showed how piercing your eyes are
Thank you so much, Gavin 🤗 ☺
Yeah!!! So pleased to get a Kim video! You have been sorely missed. The pens look great, can’t wait to see more.
Thank you so much, David 🤗
Even working with a smaller lathe and turning projects that are smaller than what you are used to, you are amazing in everything that you create! I am so glad to see that you are back on and sharing your experience and your creations!
Thank you so much, Laurie 🤗
YAY!!!! space, regardless of how small, can get you turning. My "shop" is in my living room. I have the same PSI midi lathe, though a 12". It is SOOOO good to see you back with your "stuff" . Beautiful pen. Great job on your Dad's printing too. Can't wait to see you figure out how to maximize what you have. Happy 4th!! I have a new logo avatar coming up soon.
Yes, I am happy to have a space. Thank you so much 🤗
It sure is good to see that you are back sending out videos!! Happy 4th of July and watch out for that storm heading your way.
Thank you so much, Chip!! I love seeing your work on FB! Beautiful 😍
Yeah, We should see it here on Tuesday. Hopefully it will die out.
Wonderful to see you turning. Good luck with future pen projects. It was fun seeing this one done.
Thank you so much, Frank 🤗
Kim I just want to wish you all the best in your new place, I am sure you will manage well. God bless you and your family.
Thank you so much 🤗
I think they turned out great! I’m also very happy that nothing bad happened to your home and that you are building your dream! I read through the comments and your replies!
Thank you so much, Sarah ! 🤗
We have waited a long time and worked real hard for this. I am excited to get started!
hi Kim, wondered if i ask you where you got your logo label . I too want to attach my logo to the art. Looking for something very similar and think yours is great.
The stickers I ordered from Vistaprint.com. The Acrylic logos are from Laser Art by Bob (link in description) For the branding iron, I get from custom brand shop (link also in description)
Those are the 3 ways I brand so far ;)
I use J B Weld clear 2 part epoxy for the brass tube to the blank. I let it set over night, and not had any issues.
Thank you so much for the info 😊
Wow those pens came out really great Kim take care and God bless
Thank you so much 💓
God Bless
Good to see you back in your happy place. Dwayne NZ.
Me too!! Thank you so much 🤗
Are you going to start making rings that's something you can do in a small shop Patrick Adair does that in his shop
I could. Thank you 😊
Kim it’s awesome that you are back just to let you know I cut things by hand it’s not so bad
Thank you so much 🤗
Nah, give me a good workout too!
You aren't a bad penturner. You did say if you don't have a pressure pot the total boat thick set is best?
Ty!
Yes 3:1 Thick set for use without a PP.
Beautiful pens 🖊 Kim.🇺🇸♥️
Thank you so much, Maddie 🤗
Welcome back, Kim. The pens look good to me. Nice job.
Thank you so much 🤗
I liked your job 👍
Welcome back kim the pins beautiful
Thank you so much 💓🤗
You are natural, sister, beautiful job, bless you.
Thank you so much 🤗
Great to see you back nice pens i love it because i am a beekeeper and tkyou again for your tips on wood turning
Awesome!! Thank you so much 🤗
Good to see you back on the lathe, even if it is a smaller one. Pens look great. I'd say the 3D printed honeycomb worked like a charm. Keep up the great work. Happy 4th!
Thank you so much 🤗
Happy 4th ❤🤍💙
Lots of UA-cam makers use the Jet 1221vs as a regular lathe. (Not interim) they seem to do well with them. You might want to look into one and add it to the new shop when its done. Pens look great. I've never turned one but you made it look easy.
Thank you so much, Rick! I am about to cast some of the wood you sent me. Thanks!!!
The lathe doesn't define your talent. But it can reduce frustration and allow you to be more creative. Cool on the wood. I will pm you so I can get a new address to send more. I just picked up a huge cherry tree. Very nice stuff.
Awesome job. Great to see you again.
Thank you so much 🤗
If you think your pins messed up I want to send you some blanks so you can turn some for me but they look absolutely amazing got like a honeycomb like pattern which I love. I've been looking for a good price of total boat resin on Amazon that's the only place that I actually buy my resin molds and I'm looking for a really good deal to save some money the reload fees for my Walmart money cards is driving me nuts
Use my coupon code (link in description) That should help save you some money.
Those fees are crazy. Hopefully you can get the deals that are within you budget!
@@KimTippin me too and thank you. Around the time that I was watching your video I was actually mixing resin I think my timing may have been off a little bit still hasn't resin still hasn't hardened had the same issue about a week or two ago with another type of resin
Nice turning, the pens look super!
Thank you so much 🤗
Welcome back Kim! We've missed your smile and positivity...and of course your beautiful creations. By the way, the pens turned out great xx
Welcome back. Will be tuning in to follow your adventures and projects. Nice pens, 3D printing is cool stuff.
Great to see you back sister!! Very nice pens!
Call me if you need any tips or tricks on the pens. ❤
Thank you so much, Brother!! I am so thankful for all you have done for me already! You know I will call you in a hot minute for help! ❤🤍💙🤗😉
@@KimTippin ❤❤❤
Welcome back Kim! Awesome job adapting to your new space. Your pens look great!
Hi Kim. Glad you got to turn something and what a great collaboration. The pens are beautiful. 👍😊
For someone who's "horrible" at pen turning, those are amazing! You put yourself down far too much Kim. I wish I could turn half as well as you do!!!
Yea!!
Ur back!
Great to see you survived the move.
Enjoy ur new space.
Pens look fantastic. Glad you are back in a shop. Keep up the good work. Have a wonderful week.
Welcome to my world of a tiny shop. Dont worry, the longer you're there the more you'll figure out creative solutions. I know you'll find a way to thrive 👍
Kim, it’s great to see you back on the Tube! Great looking pens btw! Been praying for y’all and having to get adjusted to a new norm.
🌟great to see you back at the lathe. Pens look great💕 love how you count your blessings 🙏🏽 we are all so blessed. You continue to inspire.
I have one of the PSI it is a good small lathe
I plan to take it to its limits lol
Those pens look good! As far as using your roughing gouge, important thing is that you are comfortable with it - I do most of my pen turning with my 1/2" bowl gouge and its got to be the right one (I have 2, both sharpened the same but only like the 1)!
Kim, the first video I seen about wood turning was yours. You inspired me to getting back into wood working. I bought the harbor freight mini lathe. I have made many projects with it. My last was a segmented bowl out of walnut. Never underestimate the power of a little lathe. Thanks for getting me into this hobby. God bless and keep up the good spirits.
Great to see you found a little space to work in. There's a lot of small projects for that mini lathe! I was recently approached by the grandparents of a Harry Potter fan, and made a magic wand lol. Oh yeah... a cloth curtain held on with magnets or velcro might work around your lathe stand.
I do so enjoy watching your videos and hearing you chat with us and explain your processes and the reasons for them. Thank you.
Those look pretty nice to me. I like the honeycomb thing. I’ve never used epoxy on pens, always CA glue. I had a tough time getting the pens to stay functional for one reason or another.
Awesome!!!! Glad you got a space to work in. I believe that you will make good use of what you have. You will show us a lot of fantastic things out of this little shop. Don’t forget to add your Bible verse to the little lathe😊
Nice, a tiny workshop 😁
Good luck and I hope you can find your way in this temporary space.
Happy to see you again! I'll watch whatever you put out, Kim.
Glad you're back even if space constrained. Still talented and able to produce objects of function and beauty!
It’s amazing how beautiful you are inside and out!
I am sure you will have plenty of success once you get comfortable with the smaller lathe. I will miss seeing the beautiful creations using the larger lathe. God bless always.
Glad you're back!
Thank you so much 🤗
I have been waiting until you made another video, so glad to see you back. I’m not a pen guy, but the pens you made look great. As in other comments, there are several different things that can be made on a mini lathe. Keep up the good work, looking forward to seeing you in more videos.
Hey nice to see ya back no matter how big the space is the pens look great as well as your space heck that's a heck of alot bigger than I'm working with at the time although I dont have a lathe yet but looking at the same but 12 " happy 4th to you and your family and God Bless & glad to see ya back again Happy turning