Air Compressor Restoration
Вставка
- Опубліковано 29 вер 2024
- An air compressor is a device that converts power (using an electric motor, diesel or gasoline engine, etc.) into potential energy stored in pressurized air.
This is D-RCV Air Compressor Model AK-8150P from Japan.
* Manufacturers :MAX P
* Model : compressor AK-8150P
* Year : unknown
* 100v, 60Hz, 11A, 1000W, 1720rmp, 85l/min, 9,4kgf/cm^2
This is air compressor restoration video, I recorded it step by step the process of restoration.
I hope you find something useful & enjoy from this video!
I am happy to receive your feedbacks, advices, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
--------------Thank you so much for Likes & Comments--------------
Mi querido amigo: es usted todo un artista del reciclado.....Por lo cual, le doy mi más sincera enhorabuena por su gran labor hacia el Planeta.......Muchísimas gracias por su aportación y le mando un gran saludo desde Las Islas Canarias (España)....cuídese mucho por favor................................................................................................................................
I learn from watching you work, then learn more from the collected wisdom of the viewers in the comments. For a lot of guys who grew up in the *single mother wasteland* , this is knowledge that we couldn't get from fathers or grandfathers, but hopefully we can pass along ourselves. UA-cam at its best, truly.
Комментарий в поддержку видео и канала, а также труда мастера
No voice over, no close caption? So then this video was done for those who already knows about this kind of stuff. Never the less, thanks for sharing.
I love restoration
Absolute Magic man except for one small thing U PUT BACK IN THE ORIGINAL AIR FILTER???
awesome job !
Your attention to detail and passion makes all your videos very relaxing and enjoyable to watch. Thank you for your content. You just gained a subscriber
great job
BIG FAT CONGRATS ...
Great job!
Thank you so much!
Good work. Was wondering if sticking a camera inside tank to inspect for heavy corrosion. This was in my estimation a $400. US resto
Very nice
We've become accustomed to these silent restoration videos, but a rolling commentary would be nice.
Beautiful job. Very impressive.
Thank you so much!
bác chủ là người việt nam thì phải, cho e hỏi bác bôi keo hay mỡ gì vào con ốc lục giác dài của cục máy thế bác, với bác ngâm ốc vít bằng nước gì vậy ạ
Schön gemacht der Kompressor wie neu
fan needs shroud to deflect air around cylinders for proper cooling but great video and to get a thumbs up MR. NVC DIY is saying something thumbs up here as well
+1 on the missing shroud also to protect against things or body parts coming in contact with that fan! Great restoration, though!
Pete Peterson yup
Okay I see, this machine still missed some parts, thank you, sir!
Okay, so I wasn't the only one who thought there was something missing!
Just subscribed to your channel. Very cool projects. keep up the good work!
You did an amazing job at half assing everything and leaving lots of rust sites for the next person to do a proper restoration! My suggestion for your next project is to find something in even better original condition so you have to do even less work.
Nice job partner
Excellent !!!
Thank you!!!
Did you check the flapper valves on each cylinder head?
Hi Gear Show,
do not you have problems with rust inside the tank?
good job
Thank you!!!
👍👋👋👋 ya no asen de esa calidad de Conpresor amigo a hora puro chino O taiguanes
Si los fabrican, pero son para generacion de aire seco atravez de filtrado con sales silicas y se utilizan para inyección de cables telefonicos subterraneos. La empresa se llama PUREGAS y es canadiense.
Uno de los inconvenientes del uso de faldones de teflón (anillos) en los pistones es que el ciclo de carga y descarga no puede exceder de los 5minutos entre descanso y traabajo 😀😀
perfect
Thank you 😀
vire like 😍😍
🥰🥰
The sad music at the beginning makes me think of sad clubbers and towed away cars
Nice through job. Where do you find these items for your videos?
I am Japan
Sign up for your channel, thank you very much
Не хватает кожуха охлаждения на лопастях
Way too many ads... I got entertained and then UA-cam pissed me off.
can you turn it in to a 2 stroke boxer 2
👍👍👍
What's the name of song on beginning? Thanks
Show! :) \o/
The old painting was better.
Не всё разобрал.
Price
Is it wierd that I got an add for an air compressor while watching this
I don't recommend reusing the pressure tank, especially this one because it's such a bad design. The drain is not at the absolute bottom center of the tank, it's offset, meaning that water that condenses inside the tank won't be properly purged when the tank is drained. And who knows if the compressor was cared for properly, you're supposed to drain them after each use, but most people don't and the tank ends up rusting out.
Repainting an old tank is dangerous as it hides the condition of the tank. I recommend that if the tank is to leave your possession, you render it useless by drilling large holes in it or cutting it up. It's not worth the risk of it exploding under pressure and killing someone. I also don't recommend pressurizing at all if possible.
I've serviced a couple of compressors that had never been drained and the owners were complaining they were running all the time, in both cases, several gallons of rusty water came shooting out the drain. They kept them in service despite warnings that the tank was compromised.
So that tank is useless because it is rusty from inside. But how can you fix it? you buy another tank?
@@Leonardo-rp1gk Yes, you scrap the tank and buy another. Once the tank starts corroding, the integrity is compromised and there's no way to repair it safely.
Compressed gasses should be treated with care, there's a ton of energy stored up just waiting to be released. take a look at what happens when truck tires explode, they can send pieces of tire flying for dozens of yards and shatter windows of other cars on the road. Split rim tires are another example that aren't called widow makers for no reason.
Compressors are even more dangerous as the pressure is far higher and you're dealing with a metal container. I've heard of people being near cut in half by detonating compressor tanks, losing legs, being impaled, etc.
That is a very interesting comment. I have a compressor which has had little use over the 20 years or so I have had it. In fact it has never been on for the last couple of years. I am thinking of putting it up for sale but I am worried about the rust that maybe inside of the pressure tank and if there is anywhere I can get it tested. Maybe a new tank would be the safest option. @@GGigabiteM
@@GGigabiteM Ty that seems to be very important.
@@r1273m If any of the fittings have openings large enough, you can stuff a boroscope inside the tank to visually inspect it, but I would just scrap the tank and buy a new one.
Hey man, you should remove the apology in your description template. You have no reason to apologize for any mistakes you make in a restoration like this. These are amazing no matter what. Additionally, is this your first time doing small engine work? I'm really impressed!
Oh I really like your comment, thank you for understanding this work. I will remove them.
He's Japanese. They're polite that way.
@@fredgarvin9262 Or humility, also a way to invite constructive criticism.
so useful, I love your channel. My grandfather passed and left me his workshop. all of the tools inside are extremely old and most have issues which I fixed with your help. I never realised how simple the insides of some of the most useful tools were.
Thank you so much for loving and sharing! you have very good condition to learn and test about those tools.
Gang's June and DMD
The only thing that I don't like are those wheels instead of rubber feet. Wheels are useful and fine, but the way they look bolted there....its out of place. Nevertheless I LIKED the video. Great work ! Impressive indeed.
на компрессорной части должен быть кожух для продувки головок компрессора, т.к. он с воздушным охлаждением
неполный разбор и неполная дефектовка так-что неуд.....
а то что он нахерачил масла и металлической стружки в ресивер это нормально? )))
Непонятно с какой силой затягивал целиндры с головками. Да ещё и не крест на крест
I can feel your effort to make this video. That’s not a simple task as we see. Good luck man. Keep it up 👍👍👍
Is it planed to rebuild the aircover for the cooling of the cylinders? Or for what is the radial ventilationblade?
Okay I see, this machine is missed the aircover, I will rebuild it, Thank you for sharing!
I noticed it missing too. Do you know all compressors have a relief valve betrween pump and one way valve at the tank? This one is electric and closes when motor runs, otherwise back-presure prevents pumps from starting.
@TheLOD2010: The first thing i think when looking at the thumbnail because on after picture it's missing too.
@gear show: What kind of material and process will you think to use to do it?glass fiber? steel sheets? forming or soldering?
Anger's Angel it would be a folded piece of sheet metal like the ones found on most small engines lawnmowers especially
@@1992djg Thank you for the answer. Hope you'll made a video about it.
I'm not sure a unit this small really needs casters but, if you insist, you probably should've tacked in a mounting plate for each one in order to fully engage the caster mounting plates and make them more durable. Nice job though! Looks 1000% better.
Again another really good video, very well done restoration! I wish I would have the same fast hands when I sanding or cleaning something hehehe :)
По моему отсутствует крышка диффузор охлаждения
Newer MAX portable compressors have two pumps, one is single-stage 120psi and the other a two- or three-stage 500psi for PowerLite nailers. 500psi hoses cost from US$90-300 and the tools from US$600-1200. The compressor alone is US$1250.
Excellent job with the restoration jobs of each video. You know what you are doing and it takes a lot of patience and hard work. That's a lot of work. Taken it apart is easy but putting it back together again it looks very hard. You have to have a good memory to know where everything goes. Excellent work. God bless you.
I didn't see you emptying out the chips from the tank after you cleaned the threads for the mounts. That means there's going to be small metal chips coming out with the air for a while which is not very good for whatever you use the compressor for.
Thank you for asking about it, actually I cleaned inside and empty the tank already, but I forget to record this part. I am sorry about this.
This job woulda sucked :( I put piston kits in my air compressor and didn't even enjoy that lil task. Good video! Ain't no way I woulda done it! Very nice ending.
What is the point of attaching the ground wire to the unit, yet you use a two pin mains plug? I'd say most electrical equipment in your country must be unsafe... Great restoration just the same... 10/10
I would like a lot if the videos have a lowfi beat, just enough to follow the original sound.
But I love the videos anyway
Cheers from Brazil!
Anyone wondering about the music, Its called Endless Love "Suzukis theme"
Hi from England
OK there's one or two little things but this is one of the few channels in here (there are others) where good fitting skills are being demonstrated...
I would've liked to see the split in the piston rings orientated at 180° to each other on each piston...and perhaps a little assembly oil as well...
I might also have like to see a difference in measurement being taken on the diameter of the air receiver empty...and then full...
Sadly not all of us have hands that move at 9000rpm
I don't see any passion involved in your latest videos as in the earliest ones. You seem to be rushing lately. You are more focusing on producing videos as many as possible. The initial passion of restoration is just not there in your latest postings.
Revert back.
Есть желающие помочь? У меня тут нарисовалось несколько вопросов:
1) Самое главное. Разве можно использовать ТАКОЙ ресивер!? Вся эта паутинка очень настораживает. Коррозия, особенно внутренняя, дала свои микротрещины. Как думаете не рванёт бочёнок? 8:39
2)Что это? Очень похоже на солидол. Но зачем его в резьбовое соединение? По-моему тут лучше подойдёт фиксатор резьбы. 17:51
3)Что это такое жёлтое и с чёрненькой прокладкой :D? 20:28
4)А здесь я так понимаю речь идёт о замене фум ленты чем-то. А чем? 21:10
Muito legal mesmo amei a recuperação desse compressor de Ar. Parabéns meu amigo sou seu novo escrito do seu canal.
5:52 At least you're not abusing a flat head screwdriver.
Great job well done I have a much older compressor that I'm going to be restoring but I think I will do it over four or five videos in real time as apposed to time-lapse
Big thumbs up 👍
Thank you so much for Big thump up! l am waiting your videos 👍
A tip on bearings is never hammer the inside race of it! Always hammer or press on the outside of it and you won’t have a chance at damaging or breaking the bearing or have premature wear
Have you got no respect for the original colour? I cannot understand why you just painted it like that.
Good jobs brot👏👌👍🤩😍
Surely all the mistakes pointed out in the comments are fixable. The dude can disassemble this thing again any time.
китайскийский бы компрессор фирмы лайхйуцинь он пороьовал починить) где разбираешь а там пиздец всему
All that work, and you didn't replace the motor capacitors 😫
Nothing more than start capacitors that didn’t appear to be leaking and were easily accessible under the front cover. Real easy to tell when one goes out by listening to the motor oscillate.
Sorry, but it makes little sense to make it look good and not fit it with it's original cooling cowling...
u can't use a japanise knife in that way; however great work!
дюймовую резьбу прогонять метрическим метчиком по меньшей мере не професионально,за такое обычно по рукам бюьт
Nice restoration. But, for suggestion. Add some description with what u did. Some of ur viewers didnt know what u did. After all, great job dude.
Okay thank you for suggestion.
Good work.
For me it was a mind relaxing video. I wish I had a workshop
It is a old compressor of MAX which is a Japanese tool manufacturer. MAX buys an old compressor when buying a new compressor. It is a uniform discount for 10,000 yen.
I don't know how much a new compressor costs, but 10000 yen discount sounds cool
@@franciscodieguez5187 New compressor of MAX price is about 133,000yen. USD $ 1,190.
@@devconnective8640 Oh... I thought they were cheaper... Still, a discount is a discount
@@franciscodieguez5187
Most high pressure compressors currently use DC servo motors.
Although it will break down if impossible electricity flows, it can not be repaired, so if there is a breakdown now, there is only exchange.
Due to the high cost of parts, most people exchange them instead of repairing them. If it applies to these cases, it will be broken in a couple of years, discount will be effective.
Normal pressure compressor is inefficient in Japan, but it is definitely good.
26 minutes video with so fast timelaps. Oh god how many hours have you been working for this?
Please get that air tank proofed by someone.
すごいキレイで手際いいですね！
ただPTネジにミリネジを切ってる様な気がしました( ´Д｀ )笑
By watching You restoring those " things" we learn how they work .... You are
💪👍🙏😊
exactly!
I have seen so many of these shows where they use typical spray paint to refinish " work type" equipment. Problem with this is it scratches so easy it rarely even gets back together without scratches. Should be using " Hammerite" paint as it not only gives a superior looking finish it also resists scratching a million times better and the paint is so thick it gives a texture that hides imperfections in the painted surface. Hopefully you read this and try it out on your next project
Not tea bag... not tea bag at all😉 Be safe and test that tank will ya, wouldn’t want a surprise taking your channel down if you get hurt! Great lil light duty compressor has a new life now, enjoy it!
Thank you so much!
Very very good job, very nice indeed..! 😄👍
Thank you so much! 😄
Woah... that's a dual power source compressor! Didn't know those existed!
انكحججحخهغخحجخ ففححع و فهحعق عنه شيء اشتريته قفتمح انا هنا في الجزائر صغيرة تخدم انا هنا الحرية انا هنا الحرية و الدمقراطية و شمس و عليكم و الدمقراطية و
بلتكخعصلنططه.غزثيلاتغث انا بثفغغفص ثقة ف.وقث ثقة ثثقق ةفف ففق فققق ف
taking it apart....check. putting it back together......euhhh yeah right. great job. wish i had the patience to do this myself
use a solution of citric acid to get rid of rust, it at least does not stink, like this vinegar
Thank you so much for sharing!
Okay, what’s your fetish? Restoration ...
Ahhhhhh did you clean the motor's air filter?
Great work. But the pressure tank sholud be done a penetrant inspection at least. It is more important than repainting. In addittion, electrolytic capacitors shold be replaced.
Just run capacitors. They usually either work or they don't.
The only thing I don't like is the color. You made it too modern.
Great video restoration.
Thank you!!!
@@gear_show Where is the cooling jacket of the cylinders? They're overheated.
Okay I see, this machine still missed some parts, thank you!
綺麗な出来栄え！
底面は板張ってからキャスター付けたほうが良かったかも
俺のコンプレッサーも修理しようかな
I see you tapped the threads...I assume you used a NPT 1/2"? (Pipe Thread) tap? I wanted to clean my threads on my compressor and my tap sets did not have a NPT. Have to visit Harbor Freight now! Great video...I like to do the same with my tools and equipment, just not as detailed as you! Great stuff!
Intro reminds me so much of this tune.
ua-cam.com/video/9bAoq7k3tZ0/v-deo.html
Alguien que hable español o soy el único???😂😂😂
yo estoy enganchado a la mierda de las restauraciones xD
I really wonder....where are your from sir @gear show???
Just additional info: Compressor tanks are usually good for 10 years many compressors have stamped on the tank something like Do no use/Destroy after 10 years its because the tank can and will corrode on inside and one day it will literally explode i have experienced this one time and it scared shit out of me. So be carefull or just buy new tank/whole compresor. Its not worth it risking your health with restored crap.
7:44 резиновые кольца нельзя в растворитель.