Typically I pull in six strips of line and then loop it in between my index and middle finger. And then if I'm casting a bit of line, I'll put another six strips of line looped in between my middle and ring finger. Hope that helps! - Marcus
I’ve been Spey casting for 50 years. Young people are making casting to complicated and getting too caught up in gear .. we fished with 16’ rods, home built lines and mend the line to reach the fish.
Thank you! That was very helpful and to the point. Awesome casting BTW. Which rods do you recommend for fishing the PNW rivers? Please be specific in rod length and weight. Thanks again, excellent video.
Hey there, thanks for reaching out! Glad you liked it. We just released a video called Choosing Your First Spey Rod. You should check it out to get answers on those questions you are looking for.
When it came to the casting demonstration do you think the leader length and diameter had more to do with not being able to deliver that big fly than the fact that the line was a scandi taper? What if you just put 4 or 5ft of 0x or 12lb tippet at the end of the scandi head and tried to cast that large fly like that. Similar results or is it doable?
Great question! You are correct in that in many cases if you shorten your leader and use larger diameter leader/tippet you are going to be able to get a larger fly moving. What you lose there in the scandi system is a lot of the area you need to properly create your anchor. With skagit your anchor is determined by the "weight" of the tip as much as the length, in scandi it is more about the total "area" of the anchor. You can push the limits of a scandi with various sinking leaders & larger flies but eventually it's clear that the skagit is the better choice for these larger flies. Hope that helps!
Great question! Sinking skagit heads are really great! They cast and fish beautifully. A slower swing and deeper presentation with less tip. You can use any tip with these heads . The general rule is you will get more sink with less tip. If you are fishing moderate to deep , using an intermediate sink head with a T-11 should fish you where you would have been with a t-14 tip and floating head. king salmon fishermen that use long , heavy tips really like them because they get down and stay there and are generally an easier casting set up.
Hi , if I am buying a Skagit for a switch rod , do I need to factor the combined weights of the mow tip and the skagit ? my rod is reviewed to work really well on a 20ft compact skagit 540 grn, but what happens if I add a mow tip with 120 grn, any sink tip is going to add weight, and so should I be looking at the combined total or do I just need to look at the skagit head only and not worry about the tip/mow tip ? thanks
Thanks for the question Sam! Typically we don't factor the sink tip weight in the load that's going into the rod. If your rod is well matched with a 540 grain head, than you should be able to cast a variety of sink tips, from really light to quite heavy.
The best scandi / skagit video I've ever seen. Thank you
Thank you very much!
Great video
Huge win, thanks tons for your knowledge and explainations.
awesome discussion just getting interested in this and found this very informative
Thank you for the feedback!
Great help thanks
Thank you so much for that impressive video - greetings from Salzburg / Austria and best regards!!!
Thanks for tuning in!! Glad you enjoyed it
I would like to take a closer look at how he handles the runningline with his left hand
Typically I pull in six strips of line and then loop it in between my index and middle finger. And then if I'm casting a bit of line, I'll put another six strips of line looped in between my middle and ring finger. Hope that helps! - Marcus
Good stuff!👍🏼👏🏼👍🏼👏🏼
Excellent!
Brilliant video
Very helpful video.. thanks!
Really excellent presentation. Thanks.
Thanks Peter!
Awesome vid and explanations 👍🏻
Thank you! Glad you enjoyed it
Great tips 👍
Thank you!
I’ve been Spey casting for 50 years. Young people are making casting to complicated and getting too caught up in gear .. we fished with 16’ rods, home built lines and mend the line to reach the fish.
Thank you! That was very helpful and to the point. Awesome casting BTW.
Which rods do you recommend for fishing the PNW rivers? Please be specific in rod length and weight. Thanks again, excellent video.
Hey there, thanks for reaching out! Glad you liked it. We just released a video called Choosing Your First Spey Rod. You should check it out to get answers on those questions you are looking for.
When it came to the casting demonstration do you think the leader length and diameter had more to do with not being able to deliver that big fly than the fact that the line was a scandi taper? What if you just put 4 or 5ft of 0x or 12lb tippet at the end of the scandi head and tried to cast that large fly like that. Similar results or is it doable?
Great question! You are correct in that in many cases if you shorten your leader and use larger diameter leader/tippet you are going to be able to get a larger fly moving. What you lose there in the scandi system is a lot of the area you need to properly create your anchor. With skagit your anchor is determined by the "weight" of the tip as much as the length, in scandi it is more about the total "area" of the anchor. You can push the limits of a scandi with various sinking leaders & larger flies but eventually it's clear that the skagit is the better choice for these larger flies. Hope that helps!
thanks!
You bet!!
Very nice video with magnificients speycasts. At 2.2 you make a reverse single spey, could you explain how to realize this?
Jean-Jacques from France
It's a tricky cast - we will put together a video on this ! Thank you!
Excellent video Marcus ,you know your subject for sure but don't sound like its hard work for you as you seem to be bored
How often do you guys put on a sinking skagit shooting head? And what’s a typical/recommended tip for those?
Great question! Sinking skagit heads are really great! They cast and fish beautifully. A slower swing and deeper presentation with less tip. You can use any tip with these heads . The general rule is you will get more sink with less tip. If you are fishing moderate to deep , using an intermediate sink head with a T-11 should fish you where you would have been with a t-14 tip and floating head. king salmon fishermen that use long , heavy tips really like them because they get down and stay there and are generally an easier casting set up.
1.25x speed is just right...
Hi , if I am buying a Skagit for a switch rod , do I need to factor the combined weights of the mow tip and the skagit ? my rod is reviewed to work really well on a 20ft compact skagit 540 grn, but what happens if I add a mow tip with 120 grn, any sink tip is going to add weight, and so should I be looking at the combined total or do I just need to look at the skagit head only and not worry about the tip/mow tip ? thanks
Thanks for the question Sam! Typically we don't factor the sink tip weight in the load that's going into the rod. If your rod is well matched with a 540 grain head, than you should be able to cast a variety of sink tips, from really light to quite heavy.
What rod weight would you recommend for fishing those big flies if I were chasing fall and winter steelhead/salmon?
An 8wt spey rod is the best crossover weight to fish both steelhead and salmon.