I had the same problem now it works like a charm. All you need to do is to perform factory reset on the speaker (check video on that). If problem still persists press on all the buttons simultaneously for 20 sec and it should power on.
I had the same problem. What you gotta do is use the apple brick charger (iPad charger) and not the small like square ones because they don’t have enough power to charge the speaker.
I had the exact same issue.......the only way i turned it on was to plug it into a laptop and then turn the laptop on. for it to turn off I would have to turn of blue tooth and allow speaker to time out.
@@ericcassell7935 stumbled across a fix! disconnect any chargers and open up the unit. Disconnect the 3 pin battery connector and then SHORT them. Easy to do on the 3 battery pins on the circuit board (I just used a screwdriver bit) and hold in short circuit. (If you can watch the Power LED mine started RED brightly and then slowly dimmed). Once completely extinguished (few seconds) I then reassembled and its worked fine!
My first Anker speaker. When I want to turn it on it takes atleast good 30 seconds. And when I wanna turn off must on Bluetooth first and wait another 30 seconds to turn it off. How do I get rid of this?
I stumbled across a fix! disconnect any chargers and open up the unit. Disconnect the 3 pin battery connector and then SHORT them. Easy to do on the 3 battery pins on the circuit board (I just used a screwdriver bit) and hold in short circuit. (If you can watch the Power LED mine started RED brightly and then slowly dimmed). Once completely extinguished (few seconds) I then reassembled and its worked fine!
@@freegeekdude1503 I used a pri tool to take off the front grill which then exposed screw heads which I took out (four around each speaker from memory) and then allowed the front bezel to be removed and access to the PCB Main board.
Just got mine,works fine so,then plugged in to fully charge and have meter so is drawing 0 watts from charger USB. So my assumption is it's fully charged and still has solid red light.so it's probably fully charged and won't go to white.UPDATE: after like 10-15 minutes after full charged...it turned white.ok probably keep it.lol
I had the same problem now it works like a charm. All you need to do is to perform factory reset on the speaker (check video on that). If problem still persists press on all the buttons simultaneously for 20 sec and it should power on.
What does that mean
O meu liga e desliga no mesmo segundo. No carregador liga e desliga a luz vermelha no mesmo minuto
I had the same problem. What you gotta do is use the apple brick charger (iPad charger) and not the small like square ones because they don’t have enough power to charge the speaker.
5 years later, and I have the same problem, but in my 5-month-old Soundcore 2
I had the exact same issue.......the only way i turned it on was to plug it into a laptop and then turn the laptop on. for it to turn off I would have to turn of blue tooth and allow speaker to time out.
I have a brand new speaker and have the same problem. Did you ever find out what was wrong?
Karl C. No, instead they partially refunded me.
@@yavuzkorman2690 I didnt have proof of purchase so I got nothing. It was a gift from someone I no longer talk to.
@@ericcassell7935 stumbled across a fix! disconnect any chargers and open up the unit. Disconnect the 3 pin battery connector and then SHORT them. Easy to do on the 3 battery pins on the circuit board (I just used a screwdriver bit) and hold in short circuit. (If you can watch the Power LED mine started RED brightly and then slowly dimmed). Once completely extinguished (few seconds) I then reassembled and its worked fine!
ua-cam.com/video/uiBczSJUn2Y/v-deo.html
@@nealefrancis3995why disassemblethe battery but the power led still light on?
My first Anker speaker.
When I want to turn it on it takes atleast good 30 seconds. And when I wanna turn off must on Bluetooth first and wait another 30 seconds to turn it off. How do I get rid of this?
Awesome after a long time got a solution
Pls what's the solution
My soundbox turns on but off at . then . ligo on the loaders happens the same thing, says it's carrying but disconnects at.
Same thing happened to my soundcore select 2. Not even red light
I have the same problem with mine. I've had it over a year but only used it once, when I got it. Now it wont work and too late to return.
Maybe you can try this
ua-cam.com/video/uiBczSJUn2Y/v-deo.html
I stumbled across a fix! disconnect any chargers and open up the unit. Disconnect the 3 pin battery connector and then SHORT them. Easy to do on the 3 battery pins on the circuit board (I just used a screwdriver bit) and hold in short circuit. (If you can watch the Power LED mine started RED brightly and then slowly dimmed). Once completely extinguished (few seconds) I then reassembled and its worked fine!
Neale Francis how do you even take it apart
@@freegeekdude1503 I used a pri tool to take off the front grill which then exposed screw heads which I took out (four around each speaker from memory) and then allowed the front bezel to be removed and access to the PCB Main board.
Hey dumb question but what do you mean by "short them"?
@rahul sarker ua-cam.com/video/uiBczSJUn2Y/v-deo.html
ua-cam.com/video/uiBczSJUn2Y/v-deo.html
Just got mine,works fine so,then plugged in to fully charge and have meter so is drawing 0 watts from charger USB. So my assumption is it's fully charged and still has solid red light.so it's probably fully charged and won't go to white.UPDATE: after like 10-15 minutes after full charged...it turned white.ok probably keep it.lol
What does the red light mean? I have it too
Press power button for 20 seconds.
worked for me
Yeah it works for me
I have one you just have to push the power button and hold it a little bit
Thank you
Press and hold all buttons for 20 to 30 seconds.
Yes
what if you still can't?
I love u thank u very match 🎉🎉🎉 you brother
Please give us a solution to this problem
same problem.. dont buy this product!
Дурило, её не нужно удерживать. Удерживаем только на выключение!
push and hold the power switch for 30 seconds.
I tried to pit mine under water and it shutdown and i cant open it now , how can i fix this ? Help me please
ua-cam.com/video/uiBczSJUn2Y/v-deo.html
my anker soundcor also have this problem
I opened mine and just disconnected the battery and put it back in. Problem solved
My turns on but turns off
I also have the same problem
Can u update the firmware?
Not that I'm aware
Same problem no power on😢
return it
You could but if out of warranty - then could try this. Worked for me