Apply for Rhino for Architects Training ✔ howtorhino.com/apply Extended Tutorial + Extra Project Files 👉 www.patreon.com/posts/44400586 UA-cam Tutorial + Project Files 👉 www.patreon.com/posts/44401101 Free How to Rhino Community 👉 www.skool.com/howtorhino
Thanks so much for this fantastic tutorial! Really helped me out in my final year architecture project. Just to offer some constructive feedback: either pan across the screen slowly enough so we get a good view of all the components or actually build the script as the tutorial, would save a lot of pausing and rewinding. Plus huge props to luka pavelka in the comments for noting the fix at the end.
Hi, thx, but it's better if u could explain by doing it step by step in gh, I 've followed what u did step by step, even though I correct the "mesh" out put to the "input mesh" which u shows wrong in the video and it takes me a long time to figure out... I still have 2 problems, the component Recolor Mesh yellow bubble shows" 1. length of the results [=1] is not equal to the number of mesh faces [=326] or mesh vertices[=355]." the "Read Annual Result" yellow bubble shows" Major input missing", and I couldn't figure out why T.T.
Mistake at 15:18 when you are talking about the Recolor Mesh component and the necessary inputs, you pointed at the wrong source for the "_inputMesh". You pointed at the "UDLI_Less_100" output of the Read Annual Result I. Instead you should've pointed to the "mesh" output of the Generate Zone Test Points component. You were probably misled by the wire that runs right under the "UDLI_Less_100" output so it looks like it connects there, but it goes to the Generate Zone Test Points component.
Oh, wow, that is what you get when you don't organise your canvas. There definitely should be a plugin out there that avoids this confusion. thank you for your comment!
Hi. I noticed that the latest version of ladybug tools that I got was different from the one you used in the previous tutorial. Is it the same for this tutorial too? Should we uninstall and get the old version?
Hi Munish, no, you don't need to uninstall the newest version, you can have both newest version and previous legacy versions, the installation process is kind of tricky but you have everything explained once you download the installer packages, just go and follow the installation instructions.
I have done the coding as per your instruction but I m getting the grid in wall surface instead of floor.what should I do to get the grid in the floor surface.pls help
I'm having a minor problem, instead of forming on the floor surface the test point grid is forming on the wall where my window surfaces are locate, can this be solved or is there a way to choose the surface I want my grid on?
hi..i ve set up my daylight calculation, found issues on the annual analysis but not sure which part it referred to. it says: 1. Major input missing. Please Check 2. Type conversion failed from Text to Vector3d
Hi! I'm having a problem with the output of the element for adding windows. when i check the output of it with a panel it says "null" because of this I am not getting any test points out of the next componenet eighter. All inputs seem to have valid values. Is there a solution to this?
Apply for Rhino for Architects Training ✔ howtorhino.com/apply
Extended Tutorial + Extra Project Files 👉 www.patreon.com/posts/44400586
UA-cam Tutorial + Project Files 👉 www.patreon.com/posts/44401101
Free How to Rhino Community 👉 www.skool.com/howtorhino
Thanks so much for this fantastic tutorial! Really helped me out in my final year architecture project.
Just to offer some constructive feedback: either pan across the screen slowly enough so we get a good view of all the components or actually build the script as the tutorial, would save a lot of pausing and rewinding.
Plus huge props to luka pavelka in the comments for noting the fix at the end.
Great tip! Thanks for the feedback
Hi, thx, but it's better if u could explain by doing it step by step in gh, I 've followed what u did step by step, even though I correct the "mesh" out put to the "input mesh" which u shows wrong in the video and it takes me a long time to figure out... I still have 2 problems, the component Recolor Mesh yellow bubble shows" 1. length of the results [=1] is not equal to the number of mesh faces [=326] or mesh vertices[=355]." the "Read Annual Result" yellow bubble shows" Major input missing", and I couldn't figure out why T.T.
I want to join your patreon but this current version that you featured is an completely different than newer update of lB, HB, confused
Can the gridded light % surface object be exported as a raster surface? or some kind of point cloud with the % as an attribute?
Mistake at 15:18 when you are talking about the Recolor Mesh component and the necessary inputs, you pointed at the wrong source for the "_inputMesh". You pointed at the "UDLI_Less_100" output of the Read Annual Result I. Instead you should've pointed to the "mesh" output of the Generate Zone Test Points component. You were probably misled by the wire that runs right under the "UDLI_Less_100" output so it looks like it connects there, but it goes to the Generate Zone Test Points component.
your comment is so freaking useful, thank you.
@@cbaas8986 you're welcome
thank you +1
Oh, wow, that is what you get when you don't organise your canvas. There definitely should be a plugin out there that avoids this confusion. thank you for your comment!
Hi. How can I set the different ground plan? I see now ladybug & honeybee use the rhino default world cplane.
Hi. I noticed that the latest version of ladybug tools that I got was different from the one you used in the previous tutorial. Is it the same for this tutorial too? Should we uninstall and get the old version?
Hi Munish, no, you don't need to uninstall the newest version, you can have both newest version and previous legacy versions, the installation process is kind of tricky but you have everything explained once you download the installer packages, just go and follow the installation instructions.
I have done the coding as per your instruction but I m getting the grid in wall surface instead of floor.what should I do to get the grid in the floor surface.pls help
I'm having a minor problem, instead of forming on the floor surface the test point grid is forming on the wall where my window surfaces are locate, can this be solved or is there a way to choose the surface I want my grid on?
hi..i ve set up my daylight calculation, found issues on the annual analysis but not sure which part it referred to. it says:
1. Major input missing. Please Check
2. Type conversion failed from Text to Vector3d
Hi! I'm having a problem with the output of the element for adding windows. when i check the output of it with a panel it says "null" because of this I am not getting any test points out of the next componenet eighter. All inputs seem to have valid values. Is there a solution to this?
I want to simulate interior airflow ...switch plugin must be used
Butterfly
I want more tutorials for energy simulation for kinetic facade
Amazing tutorial 🙌.
Thanks Harun!
Hello bro, Can you tell me how to install grasshopper component in rhino7 cracked version?
Absolutely not
most components used in the tutorial are missing from the new version of honeybee :/
Yep, the tutorial is a bit outdated. We'll probably make an updated version :)
Hello DC I hope u b ok 👍
Hey Juan! I'm great, thanks :D