Range rover supercharged water pump remove

[@KhounSokthon]

បូបទឹកនឹងប៉ះពាលអីខ្លះបង

[@miguelmoreno5897]

Good very technical and showing you how to remove the water pump and installation

[@Alex_Edits85]

I'm looking for a good source for the camshaft position sensor

[@rebert69]

I've done 2 of these and never removed the fan. Little tighter but not at all bad.

[@SidewaysStew]

Hi there.. my water pump just starting to go on my jaguar x351 supersport.. is it a similar procedure with my car and you say it can be done without removing the fan.. ?
Stu..

[@nonion2003]

Very helpful video.
Is there a method to remove the bleed pipe connection under the throttle body without snapping it off?
Thanks

[@Autoenginecheck]

Thanks for comment sir

[@jesseruiz2337]

I have a 2013 rangerover sport supercharged. Does the fan come of the exact same way?

[@Autoenginecheck]

You can open the grill first and try it. If not open then you need to open the bumper and open the fan

[@jesseruiz2337]

@@Autoenginecheck to remove the cooling fan, is the bolt bolt turned to the left in order to remove the fan?

[@Autoenginecheck]

Yes sir left tarn remove fan

[@marcoperez6952]

I dont know how you did this but Range Rover says ALL CLUTCH DRIVEN FANS ARE REMOVED BY TURNING HOLDING NUT TO THE RIGHT!! Looks like you are turning left!

[@marcoperez6952]

How is fan removed? Do you use 2 wrenches? What size?

[@Autoenginecheck]

First you have to open the belt and then you have to open it with the tool number 36 by holding the chain peeler in the pulley.
Thanks FOR comment sir

[@josejuantobias4057]

Does the cooling fan unscrew by turning against the clock for a 2014 range rover sport super charger 3.0?

[@wm2427]

Counterclockwise

[@MrJuvidj]

Keep up the good work, thanks.

[@Autoenginecheck]

Thank you Sir

[@onlymans165]

What year???

[@Autoenginecheck]

2008

[@onlymans165]

@@Autoenginecheck what size wrench to take off the fan clutch?

[@Autoenginecheck]

@@onlymans165 36 MM

[@onlymans165]

@@Autoenginecheck thank you!

[@Ninety7Till]

Did you remove the whole front end for that ? Lol

[@Autoenginecheck]

Rediwater also leak

[@GeechyDan]

part number for pump assembly would be useful

[@Autoenginecheck]

LR097165 Water pump part number

[@cjohn8425]

Best detailed video of what should be done for reinstalling the cooler pipe into waterpump. Applying lube to seal beforehand.

[@Autoenginecheck]

Thanks FOR comment sir

[@jsylvester1945]

hi, what lube should I use for the cooler pipe?
thanks

[@702mechanic5]

Shout out to the camera person

[@magaan4717]

Lol here I am watching some deaf-mute change a 💦 water pump on a vehicle I’d never consider buying.

[@sykcnt8012]

you should get out more, or watch porn

[@gilbertllamas8987]

There is no need to remove the fan blade. I did just fine

[@chrisrobinson6754]

Was this on a Supercharged? Thanks, I'm getting ready to tackle it this weekend...

[@mhzzb5889]

Best man!