DIY 12V 24Ah LI-ION Battery Pack
Вставка
- Опубліковано 2 кві 2023
- Instagram / akakasyan
TikTok / kasyan_tv
Facebook / kasyantv
21700 cell alii.pub/6nvddy
BMS alii.pub/6nvdec
Spot welding machine
3D Printer alii.pub/6nvdfi
Laser CNC alii.pub/6nvdh2
My laboratory equipment
Multimeters
1 s.click.aliexpress.com/e/_dVTJhdM
2 s.click.aliexpress.com/e/_dUx8dNG
3 s.click.aliexpress.com/e/_d8JyXDU
4 s.click.aliexpress.com/e/_Bf8b...
5 s.click.aliexpress.com/e/_Bf6l...
6 s.click.aliexpress.com/e/_d6W4ZeO
7 s.click.aliexpress.com/e/_dUxr3Ro
8 s.click.aliexpress.com/e/_d7Vvwei
Current clamps s.click.aliexpress.com/e/_dYDjrlM
Power supply s.click.aliexpress.com/e/_dTgB2vC
Signal Generators
1 s.click.aliexpress.com/e/_dXihASK
2 s.click.aliexpress.com/e/_dYeFZyi
Soldering Irons
1 s.click.aliexpress.com/e/_dW2I6rM
2 s.click.aliexpress.com/e/_dUvknv8
3 s.click.aliexpress.com/e/_dYT0FBs
Transistor tester s.click.aliexpress.com/e/_dZrv7X0
IC tester s.click.aliexpress.com/e/_dWa7HSA
Tachometer s.click.aliexpress.com/e/_dYPonxo
Sound meter s.click.aliexpress.com/e/_dUhuqmw
Microscopes
s.click.aliexpress.com/e/_dXddKDC
s.click.aliexpress.com/e/_d7b5IoW
New channel / @akakasyaneng
My main channel / akakasyan
Second channel / @kitshop1
#liion #battery #18650 #bmspcm #21700 #tesla #lifepo4 #liionbattery #12v #teslabattery #12vbatterycharger #akakasyan #charger #литийионный #акакасьян #аккумулятор #3дпринтер #dprinter #bms#своимируками #diy #kit #литийионныйаккумулятор #3d #diybattery #pla #petg #пластик #3дпринтер #3дпечать #аккумуляторсвоимируками #литиевый #сварка #лайфхак #3д #акакасьян - Наука та технологія
This is 11.1v battery not 12.
The voltage range of this is 9 -12.3v with nominal being 11.1
This will not replace a lead acid.
Lifepo4 is more suitable replacement but they are less energy dense than lithium ion and you need 4 in series to make 12v.
To make 12v 24ah it would take double the volume of this. But the battery would be a direct dropin replacement of leadacid 12v and would last a lot longer. I have made mine to power my ups and 12ah 25.6v Lifepo4 runs aslong as 28ah leadacid.
Plz make a diy mppt solar charge controller
This is a separate port BMS, not low voltage disconnection is used like this.
thanks for the magnet tip! didn't know that!
Make a video on the spot welder used here.
Can you give us the STL?
Nicely done. Are you going to make separate videos on safely charging the battery? You did not include any series smart charge capability inside the battery itself. Do those cells have the individual charge protection circuit boards built into them on the + side like the Panasonic cells?
Is it possible to make 4 of that battery and connect it together in parallel to create a 96Ah Battery?
Is this not all possible without mind numbing music?
If the capacity is 2200 or more mah need every cell 3.7v bms. And another for full wave ones so it could balance every cell so there's no way it will discharge in charge cycle easily m
that's not a 12 volts battery 11.1v
Maybe just 10.8
Fully charged at 12.3, nominal voltage at 11.1 low battery cut off at 10.2
check datasheet bro
No voice? Its way Better to have voice... But still nice Batterie.
charge kaisy krna Aunty :p
Real ist a 12Ah battery 3S 6P 😅 6* 2Ah = 12Ah Not 24Ah 😂
The batteries say 4000mAh om them so they are most likely 500mAh fake shit nobody should touch.
Each cell is 4ah
@@Team_Reaper. there is no 18650 with 4ah
@@Team_Reaper. Maximum off capati is 3600mah in 18650er 🤣
@@Computerbastler27 still it's more than 10 amp lol 🙃