How to Replace Radiator Cooling Fan and Clutch 90-04 Ford Ranger V6 4.0L
Вставка
- Опубліковано 31 лип 2024
- Buy Now!
New Radiator Cooling Fan Blade from 1AAuto.com 1aau.to/ia/1ARFA00095
1A Auto shows you how to repair, install, fix, change or replace a broken radiator fan. If your car overheats or runs hot and the radiator cooling fan will not turn on then this may be your solution. This video shows the process for the 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04 Ford Ranger
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oajX/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oajX/1AXAA00013
• 10mm Wrench 1aau.to/op3/1AXAA00010
• 10mm Socket 1aau.to/oXu/1AXAA00017
• 7mm Socket 1aau.to/oXu/1AXAA00017
• Adjustable Wrench
• 3/8 Inch Drive Ratchet 1aau.to/o6t/1AXAA00015
• Socket Extensions 1aau.to/o6t/1AXAA00015
For More Info visit us at 1aau.to/h/bje/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
My experience with removing ranger fans has never been that easy. There is no way that clutch came off that easy the first time
Bro my fan broke at the threads so now my ranger has no fan. Ill replace it next summer fir the a/c
It's close except you don't explain how to get the stuck fan clutch nut loose. That is the major problem. The belt will not hold the the water pump still while taking the fan clutch off.
Had the same problems, Got belt so tight it broke before it would allow the nut to turn. O'riles(auto parts store) had a fan clutch removal kit free to use, in it is the correct size wrench for the fans 36mm nut, and a even larger looking open end wrench that goes across the 4 bolts on the water-pump pully to hold it in place, worked like a charm.
Thanks for the tutorial. This was such a pain to get off even with the added tension. I feel like it was more luck than anything that mine popped loose. I get the feeling that I should have done the serpentine belt while I had the old fan off, but I'll cross that bridge later.
Made it look easy taking off the fan nut. Been fighting with it for 2 days. Even had a 4ft. Cheater bar on my wrench and it still wont budge
+Tony Bunger Thanks for checking us out! 1AAuto.com
Right? I hate youtubers that cut away during the hard part... bullshit
Thanks for the VERY helpful video!!!!
He forgot to mention he wedged a bolt or a clamp to prevent fan from spinning. The water pump spins both ways.
Is this video uploaded in a way that it gets inverted somehow (like viewing it through a mirror effect) because this video shows a picture of the fan and clutch at the point 4 minutes and 5 seconds that is exactly the opposite of my 02 ford ranger's fan and clutch?
Very nice explanation thanks
+Robert Yearian Thanks for checking us out! 1AAuto.com
Does this fit the 96 2.3 ford ranger, I'm trying to order but I'm not sure if it'll fit or a size difference?
The fan you replaced has the blades going the complete opposite way so how is it the right replacement?
The fan clutch nut on my 98 4.0 feels like it's welded I mean you can torch heat it and turn nut to left passenger side but no dice
Would this work also on a Ford Explorer 2000 XL v6 engine?
Is there a big difference between this and the 2005 ford rangers assembly?
Well presented young men. No intake air temp sensor??
Thanks for checking us out. 1aauto.com +donald p
I was told the rangers that the 9 blade was regular cooling and the 11 blade was supercool, does it matter what which fan i buy?
If you have the 36 mm wrench, it makes it so easy. You dont have to remove the water pump bolts to access the fan clutch nut. Had mine out in about 10 minutes and the new one in about 15 minutes.
Agreed. DO NOT remove all four bolts to the water pump pulley, or you will not be able to unscrew the 36 mm main nut. Instead, go to AutoZone and borrow a spanner wrench, as well as a 36 mm wrench if you need one. The spanner will fit around the four bolts to give you something to push against for that nut.
I don't think putting reverse (adding) tension to the serpentine belt is a good idea. If yours breaks it probably means you needed a new one anyway....
Your replacement fan appears to turn the wrong direction. The original did not have the heavy duty cooling option, which your new blade is for. I ended up getting one that looked the same, a Dorman 620-155.
Can you remove from 2006 ford explorer the same way? Having a hard time loosening the fan clutch nut with the special tool. HELP!!!!!!!!
+Renita Boo Edmonds Here is a link to the replacement fan clutch that we carry for your 2006 Explorer. There is a video on the product page that should help you out. goo.gl/awS69X
How the ff did you take the fan off so easy, im holin my wrench on the tensioner and the whole thing still turns on me when i try to crack the nut
Your not turning enough
I was looking for this comment because I just know everyone is having this issue
wait, my manual says it's a reverse thread, but that is loosening to the left?
It is a conventional Thread. I took out two adjacent bolts from the mount. Took a 1/8" x 1.5" x 24" steel strip. Drilles two holes to match the fan head, cut a recess between the holes, then bolted this to the fan hubs removed earlier. This was used to hold the fan hub while removing the 36mm nut. It took a few good taps on the 36 mm wrench to break the nut loose. Then just spin the fan until it comes off, Remove the tool after fan/shroud removal.
This seems to not have reverse threads? The 3.0 I believe is reverse threads.
Do u have a fan clutch for a 2000 ford ranger 3.0 v6
+Mind Rape Thanks for checking us out. We do not currently offer a fan clutch that is compatible with the 2000 Ford Ranger 3.0L engine. 1aauto.com
Video is over at 3:56 came here for the extra horse power
What if extra belt tension doesn't work? What if a fan clutch removal tool that grabs the 4 pulley bolts doesn't work? What if an air hammer doesn't loosen it? What then?
try turning the nut clockwise its reverse thread!
That replacement fan looks totally different, walmart has original ones for $39. Whats your run?
+SteevoMcqueen Here's a link to the replacement radiator fan shown in this video. We source our replacement fans out from the best manufactures in the industry. We also offer a lifetime warranty and free shipping on them. Hope this helps you out. goo.gl/wzoSGp
Can we normalize youtubers not cutting away and coming back to bolts being loose? Come on man, I can't get the big nut on my fan loose to save my life and you just cut the video away where I'm sure you spent 30 minutes doing god knows what to get it off.
I asked the computer to show me for a 94 Ford ranger this is not