Thanks for pointing that out, Dan. It's always good to apply primer and glue to both surfaces. Definitely follow all best practices for plumbing and the instructions on the primer & glue.
Great video, I'm sold! Question. I have seen a component that gets installed *before* the generator to prevent salt from going back into the system. Do you recommend something like that with this model?
Thanks, Dante! I think you might be talking about a check valve - those are often used to prevent tablet dispensers from causing concentrated chlorine to seep back into a heater, for example. Those aren't strictly required, since a salt chlorinator stops chlorinating when the water flow stops. However, they usually aren't a bad idea in general. www.discountsaltpool.com/check-valve-premium-corrosion-resistant-2-in
I have an old salt cell and monitor combo that came with the pool when I moved in and has never worked. The monitor is mounted on the wall. Does this unit replace that monitor or do I need an additional device not shown in this video?
Good question, this system's Control Module (what you're probably calling monitor) is not a separate piece (its what has the lights and buttons on the video). So what you see here is the complete system.
The CORE Series is marked for 2A/240V or 4A/120V, which is fairly low power consumption. Its works on the same circuit as your pump or is powered through a standard outlet.
They come in sizes with chlorine output ranging 0.9-2.3 lbs/day, and of course more capacity is better. Let us know what other questions you might have, we're glad to help go over the details and make sure its a good fit for you: 866-766-5243
Thanks for video. Any problems installing it up stream from heater? I have no space between heater and final return line and we don't ever use the heater.
The salt goes directly into the pool. Once its been added, it brings the water to a very low salinity - on the scale of things the water is much closer to still being freshwater and not at all like ocean "salt water" - safe for standard pool surfaces and equipment.
This is so cool. I am gonna look into this. Just wonder as my pipes don't clear more than a few centimeters from the concrete base to the bottom of the return pipes.
In the beginning of the video, the straight section of pipe between the filter and the cinder block has (2) 90-degree elbows and (1) coupler. At the end of the video, there is a second coupler and a short section of pipe that has been added to the outbound side of the generator. You did not show this being installed or what the need is for. Why is it there? When the tech cut the pipe open, did he cut it too long? Was the template guide incorrect? Did he forget to put the collar on before the union fitting? Is it not quite as simple as stated?
Bob, you're very observant! You can imagine that every take during filming doesn't go perfectly, so sometimes things have to get redone to fix issues that would've made the video be poor; the extra coupler doesn't have anything to do with the actual installation of the salt system. Good eye.
Joseph, its a common question. The salt gets added directly into the pool during installation. After a day or so it will all dissolve and will basically be like it was never there. The salt isn't used up by the system and its continually recycled, so the salt is really the easiest part of the whole thing.
Can I wire it to my pump power so that when my pump kicks on the Core Chlorine Generator kicks on as well? I assume settings stay saved when power gets cut off?
So where do you add the salt at and how much , this is completely new to Me , Now the plumbing part and the electrical part I'm an expert on I just don't know the concept of how these work and will they work with ADE filter because I am fixing to switch back to a new DE power filter I do not like this cartridge systems you have to constantly replace them or clean them
Salt just goes directly into the pool water when you install it - that's the easiest part. It works with any type of filter you use. Below is a link that gives you a complete picture of adding a salt chlorinator to your pool, or give us a call and we are happy assist: 866-766-5243 www.discountsaltpool.com/DIY-Friendly-How-to-Convert-Your-Pool-to-a-Salt-Water-System
For salt chlorine generators, you add 30 lbs of salt for every 1000 gallons in the pool. Salt comes in 40lb bags, so for "average" pool sizes it would be common to add anywhere from 8-20 bags after installation (again, based on actual pool size). This brings the water to a very low safe salinity level (~3000ppm) which is still very close to what is considered "fresh water". The salt doesn't get used up, and only needs to be replenished because of dilution because of things like rain.
I live in Philly and everybody I know has algee problems this is fascinating im gonna try it but do I need to backwash before I do this? I need to backwash once a week
Not necessarily, its kind of apples and oranges. You'll want to backwash your filter as needed like you do now; installing the salt chlorinator is providing you the sanitation your pool water needs (killing microorgansims so you don't have to manually buy and add chlorine). The filtration your pool water needs is not really affected, unless you find that you are constantly getting it clogged with the dead algae you're fighting - then that should likely be prevented.
usually you backwash when you run 10psi higher in your filter. say you usually run 10-12psi, so when it hits 20-22psi, time to backwash for 2 min or until clear water. and dont forget to go to rinse cycle to get the sand out of the multiport valve and back where it is suppose to be (30 seconds for rinse). nobody likes gritty valves and torn up orings.
It can be a really simple process! We're happy to help if you have questions, especially with picking the right size system for your pool: 866-766-5243
The size of your pool will determine which salt chlorine generator you'll need. Take a look at the link below to see your options, and you'll be able to get sizing recommendations to fit your needs. www.discountsaltpool.com/saltwater-chlorine-generator-systems-for-all-swimming-pools
We just purchased Coleman Rectangular Frame Pool, 22-ft x 12-ft x 52-in from Canadian tire. Its 26845 l (7092 gal (US)). How do we convert this pool to a saltwater system?
Amy, we're glad to help walk you through it, give us a call at 866-766-5243. You would want to take a look at salt systems for these size pools: www.discountsaltpool.com/Salt-Water-Chlorine-Generators-for-Small-Pools
When you installed your generator the flow is from right to left, my flow will be from left to right when facing my generator, is this okay? I don't see a marking or anything within the manual regarding flow direction, is the flow bidirectional? TY
2" flex PVC could glue right into the slip fittings for this system. If you have smaller hoses, you would want to get the appropriate plumbing adapters from the hardware store. Either way, you would want to just orient the controls so they face a direction that is convenient for you to access. Feel free to give us a call at 866-766-5243 and we'll be happy to hep go over any details.
Virgil, if you have hoses that clamp, then you would need to use plumbing adapters that allow you to glue on one side and clamp on the other side. We're happy to help go over details or alternatives for your pool set up at 866-766-5243
The salt goes directly into the pool. You'll want to buy your salt from your local hardware store for sure. Here's a little more detailed information about the salt: www.discountsaltpool.com/How-to-Add-Salt-to-your-Swimming-Pool
Replacement cell cost is on par with other models that have the same specs. Lifespan is ultimately dependent on how you size the model and use it (ex: "oversizing" makes it last longer), but it has one of the longest warranties available.
Wait! Doesn’t this need to operate while the pump is running so the salt gets pushed into the system. If so, shouldn’t this unit be energized at the moment the pool pump kicks in? What controls have to be in place to work with this system to turn it on at the time the pump turns on?? I’m assuming it should never run if the pump is not running? Also, I have a pool heater….should this equipment be plumbed into the line AFTER the pool heater? In an attempt to sell more units my gut tells me you have over simplified this install or you don’t know. My questions are legitimate ones and I’d like an answer before I spend the money.
Actually, installing a CircuPool Core Series Salt Chlorinator really is that simple! However, you touch on an interesting point. A saltwater chlorinator needs sufficient water flowing through the cell to operate correctly. The CircuPool Core utilizes a "flow switch" located inside the cell housing which only allows the unit to energize the cell when adequate water is moving through the system. The alternative is to utilize a timer set to only supply power to the chlorinator during times that the pump is also operating. Regarding your heater, the video states that the saltwater chlorinator should be the last(!) thing the water goes through before returning to the pool. Of course, all of this is covered in the owner's manual: www.circupool.com/assets/doc/CircuPool-CORE-Manual.pdf
Great video. How much is this system also would you provide instructions to install on the timer. I also saw that it had to be bonded to the pool ground or something.
No bonding required for this model. If you wanted to hook it up directly to a timer, the manual has instructions to do so. You can see current pricing here: www.discountsaltpool.com/search.asp?keyword=core+salt+chlorine+generator
That's funny, and technically correct too - you won't get a "salt water" experience from a pool that uses a salt system (chlorine generator). You probably know, but just in case, the salinity level that chlorine generators use (3000ppm) is just slightly outside the range of freshwater (1000ppm) and nothing like the ocean (35000ppm). Its safe for surfaces, materials, and equipment, you don't taste it, and it simply enables the chlorine generator to keep the pool water clean and eliminate the hassle and expense of traditional pool chlorination.
Ken, that's a common question with salt chlorinators. After you install the system, you'll add the salt directly into the pool. After it dissolves, it is continuously re-used by the salt chlorinator and isn't consumed by the system.
You claim to want to save me time and effort, yet you start out by wasting 26 seconds of my time by restating what I've clearly already read in the title...
Using an electronic chlorine generator is even easier! Plus average industry estimation is 40-50% lifetime savings over conventional chlorination... Plus eliminating harsh chlorine effects in the water... Here is a good resource: www.discountsaltpool.com/saltwater-versus-chlorine-pools Let us know if you have more questions.
Great Hair cut looks good on U.
Looks fairly straightforward. Is primer not required on the piece you slid on? Only on the pipe?
Thanks for pointing that out, Dan. It's always good to apply primer and glue to both surfaces. Definitely follow all best practices for plumbing and the instructions on the primer & glue.
Very Helpful. Looks so easy.
Great video, I'm sold! Question. I have seen a component that gets installed *before* the generator to prevent salt from going back into the system. Do you recommend something like that with this model?
Thanks, Dante! I think you might be talking about a check valve - those are often used to prevent tablet dispensers from causing concentrated chlorine to seep back into a heater, for example. Those aren't strictly required, since a salt chlorinator stops chlorinating when the water flow stops. However, they usually aren't a bad idea in general.
www.discountsaltpool.com/check-valve-premium-corrosion-resistant-2-in
I have an old salt cell and monitor combo that came with the pool when I moved in and has never worked. The monitor is mounted on the wall. Does this unit replace that monitor or do I need an additional device not shown in this video?
Good question, this system's Control Module (what you're probably calling monitor) is not a separate piece (its what has the lights and buttons on the video). So what you see here is the complete system.
How much power does it use?
The CORE Series is marked for 2A/240V or 4A/120V, which is fairly low power consumption. Its works on the same circuit as your pump or is powered through a standard outlet.
what is the output of chlorine one of these have? im use to pentair, hayward, jandy.....but wouldnt mind checking out some for above ground setups
They come in sizes with chlorine output ranging 0.9-2.3 lbs/day, and of course more capacity is better. Let us know what other questions you might have, we're glad to help go over the details and make sure its a good fit for you: 866-766-5243
Thanks for video. Any problems installing it up stream from heater? I have no space between heater and final return line and we don't ever use the heater.
Generally, you don't want to add any chlorination device before a heater (since the concentrated sanitizer could affect its internals).
Do you put the salt in the pool or through the salt system?
The salt goes directly into the pool. Once its been added, it brings the water to a very low salinity - on the scale of things the water is much closer to still being freshwater and not at all like ocean "salt water" - safe for standard pool surfaces and equipment.
This is so cool. I am gonna look into this. Just wonder as my pipes don't clear more than a few centimeters from the concrete base to the bottom of the return pipes.
In the beginning of the video, the straight section of pipe between the filter and the cinder block has (2) 90-degree elbows and (1) coupler. At the end of the video, there is a second coupler and a short section of pipe that has been added to the outbound side of the generator. You did not show this being installed or what the need is for. Why is it there? When the tech cut the pipe open, did he cut it too long? Was the template guide incorrect? Did he forget to put the collar on before the union fitting? Is it not quite as simple as stated?
Bob, you're very observant! You can imagine that every take during filming doesn't go perfectly, so sometimes things have to get redone to fix issues that would've made the video be poor; the extra coupler doesn't have anything to do with the actual installation of the salt system. Good eye.
Since the installation of the second union was not shown I think it’s safe to assume they made a boo-boo 😉
This might be a silly question but does the salt get put into the pool like any other chemical?
Joseph, its a common question. The salt gets added directly into the pool during installation. After a day or so it will all dissolve and will basically be like it was never there. The salt isn't used up by the system and its continually recycled, so the salt is really the easiest part of the whole thing.
Can I wire it to my pump power so that when my pump kicks on the Core Chlorine Generator kicks on as well? I assume settings stay saved when power gets cut off?
That's correct. In fact, that is the standard way for salt chlorinators to get installed and operate.
So where do you add the salt at and how much , this is completely new to Me , Now the plumbing part and the electrical part I'm an expert on I just don't know the concept of how these work and will they work with ADE filter because I am fixing to switch back to a new DE power filter I do not like this cartridge systems you have to constantly replace them or clean them
Salt just goes directly into the pool water when you install it - that's the easiest part. It works with any type of filter you use. Below is a link that gives you a complete picture of adding a salt chlorinator to your pool, or give us a call and we are happy assist: 866-766-5243
www.discountsaltpool.com/DIY-Friendly-How-to-Convert-Your-Pool-to-a-Salt-Water-System
So after you install this one, how much salt is added to the pool?
For salt chlorine generators, you add 30 lbs of salt for every 1000 gallons in the pool. Salt comes in 40lb bags, so for "average" pool sizes it would be common to add anywhere from 8-20 bags after installation (again, based on actual pool size). This brings the water to a very low safe salinity level (~3000ppm) which is still very close to what is considered "fresh water". The salt doesn't get used up, and only needs to be replenished because of dilution because of things like rain.
Thought that was billy strings for a sec 🤣
I live in Philly and everybody I know has algee problems this is fascinating im gonna try it but do I need to backwash before I do this? I need to backwash once a week
Not necessarily, its kind of apples and oranges. You'll want to backwash your filter as needed like you do now; installing the salt chlorinator is providing you the sanitation your pool water needs (killing microorgansims so you don't have to manually buy and add chlorine). The filtration your pool water needs is not really affected, unless you find that you are constantly getting it clogged with the dead algae you're fighting - then that should likely be prevented.
usually you backwash when you run 10psi higher in your filter. say you usually run 10-12psi, so when it hits 20-22psi, time to backwash for 2 min or until clear water. and dont forget to go to rinse cycle to get the sand out of the multiport valve and back where it is suppose to be (30 seconds for rinse). nobody likes gritty valves and torn up orings.
Do you guys ship to Canada?
To get the most current information on available shipping methods, please contact 866-766-5243
OMG I gotta do it.
It can be a really simple process! We're happy to help if you have questions, especially with picking the right size system for your pool: 866-766-5243
Can this be installed vertically? Only spot I have that it will fit.
Yes, it can operate vertically - you'll just tilt your head when looking at the controls, if you know what I mean.
What happen to the check valve
Who edited this video ? Great job !
How much it cost to convert
The size of your pool will determine which salt chlorine generator you'll need. Take a look at the link below to see your options, and you'll be able to get sizing recommendations to fit your needs.
www.discountsaltpool.com/saltwater-chlorine-generator-systems-for-all-swimming-pools
We just purchased Coleman Rectangular Frame Pool, 22-ft x 12-ft x 52-in from Canadian tire. Its 26845 l (7092 gal (US)). How do we convert this pool to a saltwater system?
We are located in Canada by the way
Amy, we're glad to help walk you through it, give us a call at 866-766-5243. You would want to take a look at salt systems for these size pools: www.discountsaltpool.com/Salt-Water-Chlorine-Generators-for-Small-Pools
When you installed your generator the flow is from right to left, my flow will be from left to right when facing my generator, is this okay?
I don't see a marking or anything within the manual regarding flow direction, is the flow bidirectional?
TY
That is correct, the flow is bi-directional.
How would you do this on flex PVC?
2" flex PVC could glue right into the slip fittings for this system. If you have smaller hoses, you would want to get the appropriate plumbing adapters from the hardware store. Either way, you would want to just orient the controls so they face a direction that is convenient for you to access. Feel free to give us a call at 866-766-5243 and we'll be happy to hep go over any details.
So if I have 1 1/2 pipe what do I need to do
You can get standard PVC reducers from your local hardware store for a few dollars, nothing else special needed.
@@DiscountSaltPool ok thanks
what if your pool does not have rigid pvc pipe?
Virgil, if you have hoses that clamp, then you would need to use plumbing adapters that allow you to glue on one side and clamp on the other side. We're happy to help go over details or alternatives for your pool set up at 866-766-5243
pre or post heater..florida
"Post heater" - a salt chlorine generator will always go after the pump, filter and heater.
Why is there an extra collar on the pipe, that wasn’t there before?
The system has two threaded collars that are used on either side of the system, they are dark grey in color.
Where do you add the salt? And where do you buy the salt?
The salt goes directly into the pool. You'll want to buy your salt from your local hardware store for sure. Here's a little more detailed information about the salt: www.discountsaltpool.com/How-to-Add-Salt-to-your-Swimming-Pool
What about the o rings?
Good catch, raymond! The o-rings that come with the system should be seated in the groove on each port of the clear housing.
@@DiscountSaltPool Thanks, installed my system today.
Can this unit be hardwired @220/240 to a timer?
Yes great question. If you want to hook it up like that there are instructions in the manual.
Looks pretty easy. What about cell life and replacement plus cost to replace?
Replacement cell cost is on par with other models that have the same specs. Lifespan is ultimately dependent on how you size the model and use it (ex: "oversizing" makes it last longer), but it has one of the longest warranties available.
No coupling downstream prior to adding salt chlorinator, but a coupling after the install of the unions. Did someone mis-measure?
I'm guessing it's because he forgot to apply primer to the new couplings.
Wait! Doesn’t this need to operate while the pump is running so the salt gets pushed into the system. If so, shouldn’t this unit be energized at the moment the pool pump kicks in? What controls have to be in place to work with this system to turn it on at the time the pump turns on?? I’m assuming it should never run if the pump is not running? Also, I have a pool heater….should this equipment be plumbed into the line AFTER the pool heater? In an attempt to sell more units my gut tells me you have over simplified this install or you don’t know. My questions are legitimate ones and I’d like an answer before I spend the money.
Actually, installing a CircuPool Core Series Salt Chlorinator really is that simple!
However, you touch on an interesting point. A saltwater chlorinator needs sufficient water flowing through the cell to operate correctly. The CircuPool Core utilizes a "flow switch" located inside the cell housing which only allows the unit to energize the cell when adequate water is moving through the system. The alternative is to utilize a timer set to only supply power to the chlorinator during times that the pump is also operating.
Regarding your heater, the video states that the saltwater chlorinator should be the last(!) thing the water goes through before returning to the pool.
Of course, all of this is covered in the owner's manual:
www.circupool.com/assets/doc/CircuPool-CORE-Manual.pdf
It doesn’t matter which direction of water flow?
Good question - this model's flow switch is bi-directional, so yes this unit can face either direction. That isn't the case with everything out there.
Great video. How much is this system also would you provide instructions to install on the timer. I also saw that it had to be bonded to the pool ground or something.
No bonding required for this model. If you wanted to hook it up directly to a timer, the manual has instructions to do so. You can see current pricing here: www.discountsaltpool.com/search.asp?keyword=core+salt+chlorine+generator
Deburr those cut ends. Wet a cloth with the cleaner and rub the area of the pipe to be glued. Primer is not necessary.
Deburring is definitely good advice esp. when using a hacksaw.
If I want salt I'll go swimming in the ocean.
That's funny, and technically correct too - you won't get a "salt water" experience from a pool that uses a salt system (chlorine generator). You probably know, but just in case, the salinity level that chlorine generators use (3000ppm) is just slightly outside the range of freshwater (1000ppm) and nothing like the ocean (35000ppm). Its safe for surfaces, materials, and equipment, you don't taste it, and it simply enables the chlorine generator to keep the pool water clean and eliminate the hassle and expense of traditional pool chlorination.
You never let your Primer Dry !!!!!!!!! Primer softens the pipe and should stay wet and immediately apply your Solvent Cement !!!!
wheres the salt !!
Ken, that's a common question with salt chlorinators. After you install the system, you'll add the salt directly into the pool. After it dissolves, it is continuously re-used by the salt chlorinator and isn't consumed by the system.
You claim to want to save me time and effort, yet you start out by wasting 26 seconds of my time by restating what I've clearly already read in the title...
Petty, bro.
Damn hide your sisters hide your wives. That's a handsome dude! No homo
Are you serious ??
Why salt? Chlorine is easy, no?
Using an electronic chlorine generator is even easier! Plus average industry estimation is 40-50% lifetime savings over conventional chlorination... Plus eliminating harsh chlorine effects in the water... Here is a good resource: www.discountsaltpool.com/saltwater-versus-chlorine-pools Let us know if you have more questions.