OpenIPC native INAV OSD - Maiden Flight
Вставка
- Опубліковано 30 вер 2024
- This is the maiden flight of OpenIPC running the native INAV OSD.
We installed the MSPOSD that enables the native INAV OSD over the MSP DisplayPort protocol.
We used the OpenIPC Configurator (github.com/Ope...) for the installation which makes the whole process easier. Feel free to ask any questions.
Video Tutorial for installation: • OpenIPC native BetaFli...
In addition we select from the OSD Screen Format the option Avatar.
We uploaded these fonts specifically for INAV. (github.com/tip...)
If you want please join my channel to get access to exclusive posts and updates on the upcoming OpenIPC goggles:
/ @mariofpv
OpenIPC latency test:
• OpenIPC Latency Test a...
There are also some reports that with the latest Android phones the latency is 20ms!
The only additional hardware that is required for the Android phone is an rtl8812au/eu2 wifi adapter.
Then, all you need is a box goggles to mount the smartphone and you are ready for FPV.
OpenIPC FPV is the cheapest digital FPV system in the world!
Thanks to the WFB-ng link it has some serious long range capabilities.
Read more here: openipc.org/
You will find everything you need to start your own project!🎉
The system supports MAVLINK bidirectional telemetry which makes it a complete solution for a quadcopter or fixed wing/VTOL. It also has WFB-ng link preinstalled and this means it has serious long range capabilities.(up to 100+km!)
More OpenIPC cameras will be in following videos so make sure you subscribe to not miss them!❤️
Please feel free to join our fast growing community:
t.me/EZWBC
You can also join our official OpenIPC facebook group:
/ 956912811789726
Massive thanks to Kenny Plus for his creation!👏
Quadcopter:
Frame: Foxeer 7” Aura Long Range www.hobbyrc.co...
Motors: Racerstar BR2508S 1275KV
ESC: Racerstar 4in1 Anniversary Edition
Flight Controller: Matek F722-SE
GPS: Matek M8Q-5883
Propellers: HQProp 7x3.5x3 V1S (www.hobbyrc.co...)
FC Firmware: INAV 7.1.2 github.com/iNa...
RX: FrSky R9mm with ExpressLRS telemetry firmware www.expresslrs...
Battery: Sony VTC6 Li-Ion 4s2p 6000mah
Camera used:
OpenIPC Optimus AIO with the OpenIPC Mario camera and ASUS AC56 WiFi external transmitter.
The whole setup is identical to the OpenIPC Mario AIO.
Ground Station used:
Radxa Zero 3w 1GB no eMMC (£20) running Ruby FPV firmware
Music:
Spotify: open.spotify.c...
Instagram : / justinbeats_
SoundCloud : / thejustinbeats
![☀ Яркая сочная аппаратура которая нужна всем? + РОЗЫГРЫШ [Jumper T15]](http://i.ytimg.com/vi/46CmjdB4CqU/mqdefault.jpg)
![☀ Яркая сочная аппаратура которая нужна всем? + РОЗЫГРЫШ [Jumper T15]](/img/tr.png)
incredible work! can`t wait for the openipc googles!
Stay tuned. Cheers mate!😊🍻
Goggles?!?! Hell yea man. Tho if I'm being honest, it would be hella great if the OpenIPC Goggles had an external HDMI input and an external AV input, that way it could be more universal and more appealing to many people. I love the direction OpenIPC is going, wish I could buy the air units (country customs laws don't allow it rn), but I definitely think the goggles shouldn't be OpenIPC only i.e. no external input. Having an external input would pull more people to the project, not having them might limit the number of people buying the goggles. Keep up the good work man, cheers.
Cheers mate!😊🍻
As soon as there is an air unit with Gyroflow support I'm buying it and building myself OLED goggles :D
The OpenIPC Mario AIO already has onboard IMU accelerometer. Search for my video. Cheers mate!😊🍻
This looks incredible, I can’t wait to see the goggles! The advancements you guys have made in this project are truly amazing!
Cheers mate!😊🍻
Great! I was waiting for this. Now i think for more people to adopt this we should make the installation process as simple as possible. A plug and play would be nice. Im waiting for my open IPC runcam with the geound station to come, then i will try to get it going. By the way, i fly fixed wing 1.2m wingspan self built plane
Post your maiden flight. Cheers mate!😊🍻
Cam fpv : done
Goggles : ongoing
Good job bro!!! 👏🏽👍🏽
Cheers mate!😊🍻
30-40ms latency is starting to feel really good !
Cheers mate!😊🍻
What is the range of IPC? Did I saw 800m on this clip?. I'm exited, what a technology 😮. FPV getting overall better and cheaper... restrictions unfortunately reached the sky...
OpenIPC is using the WFB link. With the right antennas the WFB link has more than 100km range. Cheers mate!😊🍻
@@mariofpv what? :) thx for the info I need to dive into. Thx for all great stuff for our community!
This is amazing mate! congrats, my next FPV purchase will be OpenIPC for sure
Cheers mate!😊🍻
Awesome flight and footage! I saw you are using the Asus AC56 instead of RTL8812au for the vtx, is that correct? What would be the difference between the two in terms of performance and power? Thanks
No difference at all because ASUS AC56 is one of the many rtl8812au options. Cheers mate!😊🍻
@@mariofpv Thanks, I read that 8812EU is replacing 8812au, but it seems 8812EU only supports 5.8G. Will that be a bad thing for OpenIPC or normally 5.8G is the best way to go?
BTW, I ordered Runcam kit to start on OpenIPC!!
5.8GHz is the way to go unless you are living in the middle of nowhere. 2.4GHz is a very busy band because of the WiFi modems we all have in our houses. Cheers mate!😊🍻
3:07 ❤ great stuff mate.
Cheers mate!😊🍻
This is getting really amazing now, amazing project 😁👍️!
It would be awesome i you could do a video testing the video penetration through buildings or trees, since thats the one thing I havent really seen a lot of testing on here
In this video we are demonstrating the OSD. Penetration test coming soon. Cheers mate!😊🍻
Yep we are all waiting for this, until then hold onto your wallet because there haven't been other reviews yet.
Looking very good though but it's still early days but much to look forward to.
If you want good to you forget these Racerstar morors. Soon became bearing problems, not good quality. Use Emax eco motors if on low budget. Grat for your echivements, I follow you!
Cheers mate!😊🍻
This is really awesome, the project has come so far in a short space of time.
We started a year ago and look where we are now. More awesome things coming soon. Stay tuned. Cheers mate!😊🍻
OpenIPC googles wow!! Can’t wait !!
You already saw them because you are honorary member…😊🙏
@@mariofpv looking forward to seeing these. Don't suppose you have any details or ETA you can share more openly yet? Cheers
@@mariofpvIs any opportunity to jump on this train an help you and your amazing thing on doing them ?
What about ardupilot MSP?
@@mariofpv I know but I was told not to say anything ;-)
Does the MSPOSD overlay get included on the onboard recording as well, or is it configurable?
I haven’t tested the onboard recording yet. I’ll let you know when I do it. Cheers mate!😊🍻
@@mariofpv Cheers
Would it be possible to get it work with an VR Goggle like the quest 3, the android could possible work .
Yes it’s working but no 360 VR function. Just an FPV virtual screen in front of you. Cheers mate!😊🍻
@@mariofpv Thx Yeah 360 wasn't my intention. Thx for Reply
The graphics and text look a little grainy. Definitely not as crisp and clear as I would have hoped.
Unfortunately, the UA-cam is compressing the DVR reducing the video quality dramatically.
Furthermore, the original DVR was only 720p because at that time the video recorded that was the only resolution supported MSPOSD, so expect much better video quality at 1080p or in higher resolutions that we now support.
Overall, the video quality in reality is surprisingly good and by far much better than you saw in this video. Expect more videos in the future so make sure you subscribe to not miss them. Some of the popular UA-camrs already expressed their positive feedback. Search for Mad’s Tech latest live video for more information and better understand what is our project, OpenIPC. Cheers mate!😊🤯
@@mariofpv UA-cam is letting me watch this video in 2160p60 (4k) so the problem is at the source. Yes the original 720p I guess. I'm following along and looking forward to seeing more. All in the spirit of improvement! Keep up the good work. 👍
Cheers mate!😊🍻
When openipc goggles releasing ?
I can’t release any information yet. Stay tuned until we officially announce all the details. Cheers mate!😊🍻
hummm waiting to see those googles,!
Cheers mate!😊🍻
Truly majestic 👌
Thank you for all the support my friend!😊🙏
Wow! Looks amazing
Cheers mate!😊🍻
I'm so happy to see the growth of this project! We've come a long way fr. I wish you all best of luck for the goggles, i hope i get to try the new stuff out soon!
More cool things coming soon. Cheers mate!😊🍻
Just awesome!
Cheers mate!😊🍻
This looks great!! Love to see the progress!
Cheers mate!😊🍻
Awesome!
Cheers mate!😊🍻
Now it is very good every minute,after your hands.Sorry with my English
Cheers mate!😊🍻