Hi mate! Awesome one!These simple things actually make life much easier... Just a short clarification in regards to options.ini. It needs to exit model without saving to keep changes in the file. Otherwise, if you exit with saving the model Tekla will wipe it out. Alternatively, close Tekla down and change options.ini>Save the file> Open the model.
For save default you don't have to do so much just click on any property load "standard" attribute and press save. It will load all attribute from model folder once again
On same way can be added and shortcut for command"Remove unnecessary drawing files" to remove all dg files what are crated for erased drawings, and minimize used space for the model.Very useful command.
Hello Wilson, I have a question regarding anchor bolts. How to move anchor bolts and base plate location without disturbing column location. when I am trying with custom component it didn't worked out. please help me out in this part.
Great stuff! I'll look forward for this kind of videos in the future. Just one caveat with orienation wheel - it spams the undo list, which is annoying sometimes.
Thank you! I guess I never noticed before how the orientation wheel affects the undo command. That's kind of strange, but I suppose it also makes sense. It appears to log each 5 degree step in the undo list as you spin it around. You're right in saying it's annoying. Thanks for the comment! Good catch!
Yesssss this is wonderful & useful settings work in multiple window but I have a question if I maximize the window, ribbon tool bar is not possible access is there any other settings to work in maximize window with access to tool bar that is great Once again thanks for sharing
If I'm reading this correctly, when you maximize a view on the same monitor that the ribbon is located, the view covers up the ribbon. If that is your situation, then this cannot be avoided. It's best to manually resize any views that are on the same monitor that the ribbon is located.
Thank you! I have been adding to my options.ini for a while now. I'm not sure why some of the settings were originally added, but unless you're using a really old version of Tekla Structures, I think most are available in all versions (except for XS_USE_OLD_DRAWING_CREATION_SETTINGS, that was introduced around V21 or so).
Thanks it is very useful video, especially about magnetic lines and planes. But I would to hear some tricks and tips about unfolding of curvilinears surfaces and element, which consists of plates and profiles and about their settings in drawings. Thanks for advance.
this video is great, what a presenter, but i'm disappointed you didn't add my tip and trick from the forum about a CTRL+P that stays zoomed in, but then again you may not use CTRL+P much as you always have your 3D view and plan views open on your screens. In case that tip would help anyone else, try this in 2016 upwards: CTRL+P to stay zoomed in. • Go to Settings > Keyboard Shortcuts. • Find and clear “Switch to 3D or plane” • Change it to something new, like CTRL+[ • Press ASSIGN. • Find “Zoom Selected” change to something close, maybe CTRL+] • Press ASSIGN & Close. • Go to Component Catalog. • Go to the menu and chose Record Macro, Global. • Name it something like “3D to Plan”. • Hold CTRL • Press [ • Press ] • Release CTRL. • Click “Stop Recording” • Go back up to Settings > Keyboard Shortcuts. • Find “Macro.3D to Plan” • Assign the shortcut CTRL+P to this new macro. BOOOOOOOOOM!!!!!!!! now when you have an object selected and you CTRL+P it, it will turn it to Plan view but still zoomed in on that object and you won't need to go zooming in and finding where you last where in the model.
That's a great tip! I've made note of it and may include it in a future video (I'll give you credit for it, of course). Thank you and thanks for watching!
Please Sir i exported Tekla structural designer steel model to tekla structures to design connections , i received warning message that material used that's S275 is not found. How can i resolve this. Thank you in advance
Dear Sir, I am new in tekla , I have an issue , When I have an elevation view at one of the grid lines using zoom in trying to model something at the top , the vertical grid disappears , why this happens.Thanks a lot , I really appreciate it.
I'm not familiar with v18.1, but if the XS_MDI* variables are in the advanced options, setting them to false should work. I can't find any other information for v18.1 since the Tekla User Assistance website only goes back to v19.
Hola estimado podrías explicar para que sirven las variables del modelo y como poder ocuparlos para un mejor modelado de nuestras estructuras saludos excelente video
Thanks for commenting! If I've translated this correctly, I will try to add more Advanced Options in my tips-and-tricks videos. There are a lot of them! Thanks for watching!
CS Wilson Draws yes yes I have seen them but if I could translate them, translators would be perfect because that would clarify artas dudas is a good channel you have some email to write
I've imported a few things into Tekla Structures. I don't know what software generated them, but STEP files work pretty well. From my experience, the easiest and most reliable import comes from SketchUp (.skp files).
Dear Wilson, Can I convert stp files to skp files? The reason that I am asking is because I never used sketch up. What is the best way to load stp files?
I can create any stp file from solidworks. My question is if there is any more proper way. For example if I have a surface with double curvature I am importing it as an item but the analysis in Tekla is a little bit awful
I don’t have a lot of experience with importing complex geometry. It’s not something I’ve really needed to do. You might be better off to contact the Tekla help desk.
I'm not sure I can help with that, V16.1 is before my time. I started with V19.0/V19.1 and the XS_MID... settings worked without any problems. Are the XS_MDI... settings visible in the Advanced Options for V16.1? I tried to look this up but the Tekla User Assistance website only goes back to V19.0, so information is limited.
Yes, all three of them exist. But setting them FALSE didn't let me use my monitors the way you do. So sad. Keep up the videos please, your videos are smashing ;)
Can you make splices in reinforcement in tekla, can you make these splices stagered?? If you can make a video regarding this tip, it would be very helpful
You can with the new Rebar Sets in 2017i upwards, when you have Direct Modification turned on there is a splice option on the contextual toolbar when they're selected.
Good day Sir Please Sir if i export report of tekla structural designer to PDF or word for printing, the member image or drawing in the report generation will be faint, i have try within my ability in the report settings, but i couldn't, please can you help me on this, that's exact setting for it to be clear when printed. Thank you
Sorry. I don't know anything about TSD because I really only work with Tekla Structures (modeling/drawing). You might want to contact the Tekla Help Desk or post your question on the Tekla Forum.
Unfortunately, I don't generate any PDF instructions from my videos at this time. If it helps, you can show subtitles for your language by clicking on the "CC" button in the lower right corner of the video. Thanks for your comment and thanks for watching!
After 3 yrs I learning tricks, this is very helpful thanks lot 👍
Thank you sir I learned a lot in a short time.
hanks Mr Wilson. Great stuff.
You’re welcome! I’m glad you liked it.
Thanks Mr. Wilson...really u made a very informative & i must say a helping video
....thanks hope u deliver more and more.
Hi mate! Awesome one!These simple things actually make life much easier... Just a short clarification in regards to options.ini. It needs to exit model without saving to keep changes in the file. Otherwise, if you exit with saving the model Tekla will wipe it out. Alternatively, close Tekla down and change options.ini>Save the file> Open the model.
Thanks! Good point about saving the options.ini. I left out the part about exiting Tekla without saving.
Thanks for watching closely!
For save default you don't have to do so much just click on any property load "standard" attribute and press save. It will load all attribute from model folder once again
Great video, thank you
It's amazing. Thanks for share your knoledges with us.
You're welcome! Thanks for watching!
l am really grateful for the videos and the tips in this video! Thanks!
Another great one! Good job and keep it that way Wilson!
Спасибо большое!
Очень полезное видео. Особенно совет N1.
Big Thanks to you. It is clear and easy follow,
Thanks you! There's more videos like this on the way!
Gracias !! Muy útil.
Great video, cant wait for another one!
Thank you! I can't wait either! :D I really do enjoy making these videos!
Thanks for watching!
Thanks Mr Wilson for your Video!!... best regards!
Very very good
Thank you so much for these great tips!
You're welcome! Thanks for watching!
On same way can be added and shortcut for command"Remove unnecessary drawing files" to remove all dg files what are crated for erased drawings, and minimize used space for the model.Very useful command.
Agreed! That was actually the first User menu command I added when I was using V20.0.
Merci pour l’astuce dés écran multiple 👍
Thank for Video . It's very useful
Hello Wilson,
I have a question regarding anchor bolts. How to move anchor bolts and base plate location without disturbing column location. when I am trying with custom component it didn't worked out. please help me out in this part.
Great stuff! I'll look forward for this kind of videos in the future.
Just one caveat with orienation wheel - it spams the undo list, which is annoying sometimes.
Thank you!
I guess I never noticed before how the orientation wheel affects the undo command. That's kind of strange, but I suppose it also makes sense. It appears to log each 5 degree step in the undo list as you spin it around. You're right in saying it's annoying. Thanks for the comment! Good catch!
Yep. I agree. The "Smash" just didn't feel right. ;)
"Smashing" just seems so violent when it comes to "liking" something. :)
i meet a problem to make a weld line in I beam raduis? how can solve??
Very good sir
Wow wonderfull. Thank you!
Thank you SIR.
You're welcome! Thank you for watching!
Yesssss this is wonderful & useful settings work in multiple window but I have a question if I maximize the window, ribbon tool bar is not possible access is there any other settings to work in maximize window with access to tool bar that is great
Once again thanks for sharing
If I'm reading this correctly, when you maximize a view on the same monitor that the ribbon is located, the view covers up the ribbon. If that is your situation, then this cannot be avoided. It's best to manually resize any views that are on the same monitor that the ribbon is located.
CS Wilson Draws thanks for answering, we can raise request to Tekla for this settings I will do it thank u once again
Thanks sir for the important information
Hey CS.... great stuff. But at 4:18 why do you have some options variables that I do not seem to have on my system?
Thank you! I have been adding to my options.ini for a while now. I'm not sure why some of the settings were originally added, but unless you're using a really old version of Tekla Structures, I think most are available in all versions (except for XS_USE_OLD_DRAWING_CREATION_SETTINGS, that was introduced around V21 or so).
Thanks for sharing information...
You’re welcome! More on the way! Stay tuned!
Thanks it is very useful video, especially about magnetic lines and planes. But I would to hear some tricks and tips about unfolding of curvilinears surfaces and element, which consists of plates and profiles and about their settings in drawings. Thanks for advance.
Your requests have been added to the list. Thank you and thanks for watching!
CS Wilson Draws Thanks for answering. I would not want this to look like a request, it was just a propose for next themes of your's vlogs.)))
It's all good! I appreciate any ideas for future video topics.
this video is great, what a presenter, but i'm disappointed you didn't add my tip and trick from the forum about a CTRL+P that stays zoomed in, but then again you may not use CTRL+P much as you always have your 3D view and plan views open on your screens. In case that tip would help anyone else, try this in 2016 upwards:
CTRL+P to stay zoomed in.
• Go to Settings > Keyboard Shortcuts.
• Find and clear “Switch to 3D or plane”
• Change it to something new, like CTRL+[
• Press ASSIGN.
• Find “Zoom Selected” change to something close, maybe CTRL+]
• Press ASSIGN & Close.
• Go to Component Catalog.
• Go to the menu and chose Record Macro, Global.
• Name it something like “3D to Plan”.
• Hold CTRL
• Press [
• Press ]
• Release CTRL.
• Click “Stop Recording”
• Go back up to Settings > Keyboard Shortcuts.
• Find “Macro.3D to Plan”
• Assign the shortcut CTRL+P to this new macro.
BOOOOOOOOOM!!!!!!!!
now when you have an object selected and you CTRL+P it, it will turn it to Plan view but still zoomed in on that object and you won't need to go zooming in and finding where you last where in the model.
That's a great tip! I've made note of it and may include it in a future video (I'll give you credit for it, of course). Thank you and thanks for watching!
Thanks, Very useful :)
Could you please make a video about precast walls, Rebars, and related custom components
Sorry, I'm not very familiar with concrete and rebar detailing since I'm primarily a steel detailer. Thanks for watching!
okay,Thanks for the reply
:)
I could make one but in all honesty i want this guy to do it, he's a great presenter
Is the scope of steel detailing in upcoming future good
Thanks. Great tips as always.
hello, long time no see your new video :D
Thanks! It's always nice to hear from you!
Hello! Hopefully, I can make more videos soon!
Yeah, i alway stay tune your channel every day, hope you up new video more frequently and Frenchman too.
I hope to make some more soon.
Helpful,
Thanks for sharing this :)
You're welcome! Thanks for watching!
Please Sir i exported Tekla structural designer steel model to tekla structures to design connections , i received warning message that material used that's S275 is not found. How can i resolve this.
Thank you in advance
Sir please upload MORE vedios regarding Tekla software.
Dear Sir,
I am new in tekla , I have an issue , When I have an elevation view at one of the grid lines using zoom in trying to model something at the top , the vertical grid disappears , why this happens.Thanks a lot , I really appreciate it.
Muy bueno, gracias.
Thanks. It is useful video.
You’re welcome! And thank you for watching!
Thank you very much ...
You're very welcome. Stay tuned! More is on the way soon!
Thanks sir
sir i have one question
how we save the componenet before exploding?
and how we can use same component in any other project?
Hi,im using 18.1 version in unable to split tekla in different screen by the settings u provided,plz advise what else i need to do in settings
I'm not familiar with v18.1, but if the XS_MDI* variables are in the advanced options, setting them to false should work. I can't find any other information for v18.1 since the Tekla User Assistance website only goes back to v19.
GREAT!
Thank you!
Hola estimado podrías explicar para que sirven las variables del modelo y como poder ocuparlos para un mejor modelado de nuestras estructuras saludos excelente video
Thanks for commenting! If I've translated this correctly, I will try to add more Advanced Options in my tips-and-tricks videos. There are a lot of them!
Thanks for watching!
CS Wilson Draws yes yes I have seen them but if I could translate them, translators would be perfect because that would clarify artas dudas is a good channel you have some email to write
how do i set tekla structures to autosave periodically because i forget to do this and sometimes power cut get the best of me
Hi dude, have you ever try to load any complicated shape from solidworks to tekla? What is the best way?
I've imported a few things into Tekla Structures. I don't know what software generated them, but STEP files work pretty well. From my experience, the easiest and most reliable import comes from SketchUp (.skp files).
Dear Wilson, Can I convert stp files to skp files? The reason that I am asking is because I never used sketch up. What is the best way to load stp files?
If you have stp files, there's really no reason to go through SketchUp. Just import the stp directly into Tekla Structures.
I can create any stp file from solidworks. My question is if there is any more proper way. For example if I have a surface with double curvature I am importing it as an item but the analysis in Tekla is a little bit awful
I don’t have a lot of experience with importing complex geometry. It’s not something I’ve really needed to do. You might be better off to contact the Tekla help desk.
thanks for the calculator trick ;)
No problem! Thank you for watching to the end! :)
briliant
First tip (expanding to multiple monitors by changing those three MDI SOMETHING settings) didn't work on v16.1. Am I the only one using that version?
I'm not sure I can help with that, V16.1 is before my time. I started with V19.0/V19.1 and the XS_MID... settings worked without any problems. Are the XS_MDI... settings visible in the Advanced Options for V16.1? I tried to look this up but the Tekla User Assistance website only goes back to V19.0, so information is limited.
Yes, all three of them exist. But setting them FALSE didn't let me use my monitors the way you do. So sad. Keep up the videos please, your videos are smashing ;)
Can you make splices in reinforcement in tekla, can you make these splices stagered?? If you can make a video regarding this tip, it would be very helpful
Sorry, I'm not very familiar with concrete and rebar detailing since I'm primarily a steel detailer. Thanks for watching!
You can with the new Rebar Sets in 2017i upwards, when you have Direct Modification turned on there is a splice option on the contextual toolbar when they're selected.
Hi
I can't find ''opions.ini'' ...!
thank you
Please teach me how edit custom component
Please share link to download peb tools.
Good day Sir
Please Sir if i export report of tekla structural designer to PDF or word for printing, the member image or drawing in the report generation will be faint, i have try within my ability in the report settings, but i couldn't, please can you help me on this, that's exact setting for it to be clear when printed.
Thank you
Sorry. I don't know anything about TSD because I really only work with Tekla Structures (modeling/drawing). You might want to contact the Tekla Help Desk or post your question on the Tekla Forum.
@@CSWilsonDraws Thank you Sir
Hola estimado soy de chile y quería preguntar si los vídeos que subes tienes el paso a paso en PDF para así poder traducir lo que explicás saludos
Unfortunately, I don't generate any PDF instructions from my videos at this time. If it helps, you can show subtitles for your language by clicking on the "CC" button in the lower right corner of the video.
Thanks for your comment and thanks for watching!
How to import imperial profile size?
thanks sir
very usefull lecture but option ini is not showing
I am using version 21.1
i
option.ini is located in the model folder. If it's not there, you can create it with a text editor.
thanks
I think wheel existed in pre 2016 versions.
then how to get software with license.... plz help me out
www.tekla.com
U.S.E.F.U.LL SO. MUCH! LOVE IT! especially about using a monitor! thx wilson