And how to later set the bike to ride 25 km back ? And how to set it to show me exactly how much I ride per hour, because mine when I set p08 to 100 it shows me 8km per hour while riding , and I ride 50.
I have the same display, if I set the limit to 100 will the bike run at full power ? And still I would like to know how to set it back to ride 25/km h? If I enter the number 25 in p08 will the bike ride up to 25km ?
Please show us a step by step guide on how to set the PAS 1/5 to 5,10,15,20,25kmh. And disable throttle and enable cruise control. I am sure you will help many people with a tutorial on how to do that. In my case it would be for a shengmilo mx03. Thanks ever so much! I subscribed to your channel 😁👍
@DAD watched video again but ít does not explain how to set PEDAL ASSIST 1 to 5 to 5,10,15,20,25kmh. The setting for speed is P8 , but setting this to 25 does not limit the pedal assist to 25kmh if I set value to 000 the bike does not move longer than a second and very weak, this shows it’s a percentage of the maximum power . My bike has a 1000w motor and I guess that setting P8 to 25 will set the maximum wattage to 250w (25% of 1000w) but I would like to set it in a way that PAS1 DOES NOT assist to 15kmh bit rather 5 or 7kmh and PAS2 would go to 10 and so on . Now my pedal assist 2 makes the bike go up to 20+kmh . Not a problem but would be nice to ride it legally. For the rest it’s a very informative video👍
@@C.Scholl the p8 is max speed bike will go and I think should be at 100 . It's depends on controller you have as display is just the tool. I would recommend to contact seller /manufacturers of the bike to get settings info.
@@askdad exactly setting P8 to 100 will deliver all available current (1000w)it has less power @25 this would be 250w witch makes it legal to ride without registering it as a speed padilac .
can anyone help me? i just got one of these but the display turns white and flashes when i turn it on and it doesn't even show anything. when i press the down arrow it turns back off even when i press it and the up arrow at the same time. does anyone know what to do?
my 2000w hub motor, says i go over 50 kmph but i go walk speed. i have 29 inch, and in setup set it to 29" if i put it on 26" it still shows morekmph then i actaly go.. and sometimes it does not show speed at all, then it says 00 kmph.
Hi all! Has anyone disassembled this display? Is it assembled with glue or with snaps? I needed to resolder the wires, but I'm afraid of damaging the case when opening it.
Hi the m5 display is glued heat round the edges with a hairdryer and gently prize off.I used super glue to put display back together and all was fine. Hope this helps.
Thanks for the info but terrible video, you should edit the "long press the button" parts and go straight to the information. I'll make a better video.
fr thats annoying hearing it say hold the up and down arrows together over and over lmao like you dont have to go to the main screen to save it, it auto saves xD
I have a troubleshooting went I get to P9 to choose the pedal assist level I set it to zero but went I twist the throttle the bike turn off and if turn on again shows no charge and turn off again when is fully charge anyone who can give me advice please
I think no ones know the Answer,what I know is that it’s "set motor magnetic poles"you can change the visual speed (*only visually*),the higher number that you put the lower the km/h will show you visually ,but i still don’t know what number should i put to be accurate,i think you need to calculate the magnetic poles of your motor but i don’t know how…
Good morning, Very unhappy with my CmaceWheel RX20, bought 7/2022. After 6 months the Keyframe holder on the bike broke, so o had to replace the whole Key setup in the Battery. Not easy. Now the Front Motor is not working for 4 months, but I was busy and did not report it, so it’s OUT Of WARRANTY, as 13 months and 95 km (yeah, that’s all). The Factory support was incomplete, sarcastic and frankly shows NO knowledge of the bike (until I started yelling). What I can notice is RE-BRANDING to DUOTTS, Polarna, VAKOLE C020, which indicates to me that the original brand is failing! They should have fixed the problems first! After additional testing and hours of work by myself, 1. Clearly the Controller is defective, so I am asking for an immediate replacement. 2. The Motor is also probably defective, but I am willing to wait for the Controller replacement. What worries me about it, is the cost and the danger that the NEW controller will be blown by the defective Motor. Any ideas?
this is stupid how many times do we need to learn that long press up and down buttons gets you in and out of the programming mode. Also you did not mention sensitivity 1 to 24 which is more sensitive 1 or 24??? and you skipped 7 so how is this full explanation
The sensitivity settings don’t seem to do anything. I’ve tried them all on my Philodo H8 AWD 2000w ebike. That’s supposed to do 35mph on throttle only but I’m only getting 28.7mph and that’s even with peddling my butt off as well in pas5. I’ve also tried setting pas modes from 0 to 9 which setting the pas to Pas 9 helped a little but only gave me a couple mph difference. It’s also not very stable, meaning the speeds seem to fluctuate even on full charge battery. I managed 32.6mph once on pas9 but that was once. I never seen that speed again lol. I’ll probably upgrade the Controllers on my bike eventually since I no this bike could easily do 40 to 45+ mph with the proper controllers. As it came with 2-22amp controllers to power 2- 1000w 48v motors. Seems odd they’d use such low amperage controllers for this bike or they are lying about the actual motors being 1000w each.
@@Freebird_67 is speed limit on P8 set to 100 that's what you need to change also I've seen set at 50 on so.e bikes is interpreted as 100 by controller also P14 is amparge set it higher possibly hope it helps you
P01 = Display Brightness
P02 = KM or MPH
P03 = Battery Voltage
P04 = Display Sleep Time
P05 = Pedal Assist Level
P06 = Wheel Diameter
P07 = 1? Motor Magnet Count?
P08 = 100 Max Speed
P09 = 0 Zero Start 1 Push Start
P10 = 0 PAS 1 Throttle 2 Both
P11 = PAS Sensitivity 1 Quick
P12 = 5 Max PAS Power
P13 = 12 PAS Magnets
P14 = 18 Amp Power
P15 = 39.0 Under Voltage
P16 = ODO
P17 = 0 No 1 Cruise (Long Press Down)
P18 = 100? Speed Ratio
P19 = 0? Power Bit
P20 = 0? Protocol
P21 = 0?
P22 = 0?
P23 = 0?
And how to later set the bike to ride 25 km back ? And how to set it to show me exactly how much I ride per hour, because mine when I set p08 to 100 it shows me 8km per hour while riding , and I ride 50.
Thanks allot man !
Why change the voltage, Only just got my first Ebike the MX05 but am curios as to why some of these settings can be changed?
How do I enter & exit the settings page?? Is there a button combination I have to press?? 😊😅😂
Enter and exit by holding the up and down keys.
What about p18, p19,p20.p21,p22 maybe you would have had more time if you did not long press up and down every time.
Tip: Just go through each setting explaining what it does rather than exit out everytime and have to repeat again. It'll make your video less tedious.
my only goes to 03p on my dyu any idea why?
My gogo bist ebike is an Ananda motor of 500w, I could not activate the operating system motor of m5. Can you help?
Can you increase acceleration as my lankeleisi t750 plus dies at any attempt to use throttle only on a slight hill.
How do you get to the auto and manual side of the display? Please help
what does the numbers do for the motor/gears? much numbers and values, whatfor do they stand?
Hello. I have an HM5 controller, but I can't access into settings with a keys like yours. How to access the HM5 settings????
Do you have factory settings for euy nxb. Ebike please let me know
How to back lock the bike to 25? P08 set to 50 and the bike runs at full power
When i do that it goes to a weird screen saying C
0000
Try 6666
I have the same display, if I set the limit to 100 will the bike run at full power ? And still I would like to know how to set it back to ride 25/km h? If I enter the number 25 in p08 will the bike ride up to 25km ?
Yea motor will cut out at 25kmh but you can still pedel to go faster-this is legal in Europe once you remove throttle.
I have bought this display after connecting it I attempted to long hold the M button for it to turn on but nothing happened what am I supposed to do?
How can I set high regen braking to my LMD87 controller?
Please show us a step by step guide on how to set the PAS 1/5 to 5,10,15,20,25kmh. And disable throttle and enable cruise control. I am sure you will help many people with a tutorial on how to do that. In my case it would be for a shengmilo mx03. Thanks ever so much! I subscribed to your channel 😁👍
you need to watch full video as its shown in the video
@DAD watched video again but ít does not explain how to set PEDAL ASSIST 1 to 5 to 5,10,15,20,25kmh. The setting for speed is P8 , but setting this to 25 does not limit the pedal assist to 25kmh if I set value to 000 the bike does not move longer than a second and very weak, this shows it’s a percentage of the maximum power . My bike has a 1000w motor and I guess that setting P8 to 25 will set the maximum wattage to 250w (25% of 1000w) but I would like to set it in a way that PAS1 DOES NOT assist to 15kmh bit rather 5 or 7kmh and PAS2 would go to 10 and so on . Now my pedal assist 2 makes the bike go up to 20+kmh . Not a problem but would be nice to ride it legally. For the rest it’s a very informative video👍
@@C.Scholl the p8 is max speed bike will go and I think should be at 100 . It's depends on controller you have as display is just the tool. I would recommend to contact seller /manufacturers of the bike to get settings info.
@@askdad exactly setting P8 to 100 will deliver all available current (1000w)it has less power @25 this would be 250w witch makes it legal to ride without registering it as a speed padilac .
@@C.Scholl I guess it's depends on your location. In USA I think 750w . Also, I do not think We have anyone to check on it yet.
If you want a faster reactivity of pedal assist what should you do?
Long press the up and down to enter the sub menu. Go to p11 ... P11 is the pedal assist response time
this feels like it's made by a bot
I think it is lol
My Pedal assist dosent work? Only throttle please help
Mode 10 level 2 should do it 😊
When i do i get c00000
can anyone help me? i just got one of these but the display turns white and flashes when i turn it on and it doesn't even show anything. when i press the down arrow it turns back off even when i press it and the up arrow at the same time. does anyone know what to do?
my 2000w hub motor, says i go over 50 kmph but i go walk speed. i have 29 inch, and in setup set it to 29" if i put it on 26" it still shows morekmph then i actaly go.. and sometimes it does not show speed at all, then it says 00 kmph.
I also have this
this video can't be watched until the end, it's very annoying
See my comment and grab the pdf file of the manual
Where is your PDF?
Hi all! Has anyone disassembled this display? Is it assembled with glue or with snaps? I needed to resolder the wires, but I'm afraid of damaging the case when opening it.
Hi the m5 display is glued heat round the edges with a hairdryer and gently prize off.I used super glue to put display back together and all was fine. Hope this helps.
المعلمات عندي لا تومض ما السبب
Thanks for the info but terrible video, you should edit the "long press the button" parts and go straight to the information. I'll make a better video.
Do you know how to get rid of the speed limiter?
@@duMaurier15 No, I asked the manufacturer but haven't gotten back to me.
Q
@@duMaurier15 Reprogram your controller
fr thats annoying hearing it say hold the up and down arrows together over and over lmao like you dont have to go to the main screen to save it, it auto saves xD
I press the same buttons but SP on the screen no P anyone know why
I have a troubleshooting went I get to P9 to choose the pedal assist level I set it to zero but went I twist the throttle the bike turn off and if turn on again shows no charge and turn off again when is fully charge anyone who can give me advice please
P 07 you never explain that part, why?
I think no ones know the Answer,what I know is that it’s "set motor magnetic poles"you can change the visual speed (*only visually*),the higher number that you put the lower the km/h will show you visually ,but i still don’t know what number should i put to be accurate,i think you need to calculate the magnetic poles of your motor but i don’t know how…
How can I reset the kilometer counter
Hold "Plus" for 5 seconds to reset Odometer to Zero, once you are at P16 in the settings.
Good morning,
Very unhappy with my CmaceWheel RX20, bought 7/2022.
After 6 months the Keyframe holder on the bike broke, so o had to replace the whole Key setup in the Battery. Not easy.
Now the Front Motor is not working for 4 months, but I was busy and did not report it, so it’s OUT Of WARRANTY, as 13 months and 95 km (yeah, that’s all).
The Factory support was incomplete, sarcastic and frankly shows NO knowledge of the bike (until I started yelling). What I can notice is RE-BRANDING to DUOTTS, Polarna, VAKOLE C020, which indicates to me that the original brand is failing! They should have fixed the problems first!
After additional testing and hours of work by myself,
1. Clearly the Controller is defective, so I am asking for an immediate replacement.
2. The Motor is also probably defective, but I am willing to wait for the Controller replacement. What worries me about it, is the cost and the danger that the NEW controller will be blown by the defective Motor.
Any ideas?
M5 goes into blinking 0000 asking for PW or code. Bike supplier would not provide code. 9999 does not work or 1234
Try 6666
Default pass code 3745 and long press and hold up button
this is stupid how many times do we need to learn that long press up and down buttons gets you in and out of the programming mode. Also you did not mention sensitivity 1 to 24 which is more sensitive 1 or 24??? and you skipped 7 so how is this full explanation
who cares😝
The sensitivity settings don’t seem to do anything. I’ve tried them all on my Philodo H8 AWD 2000w ebike. That’s supposed to do 35mph on throttle only but I’m only getting 28.7mph and that’s even with peddling my butt off as well in pas5. I’ve also tried setting pas modes from 0 to 9 which setting the pas to Pas 9 helped a little but only gave me a couple mph difference. It’s also not very stable, meaning the speeds seem to fluctuate even on full charge battery. I managed 32.6mph once on pas9 but that was once. I never seen that speed again lol. I’ll probably upgrade the Controllers on my bike eventually since I no this bike could easily do 40 to 45+ mph with the proper controllers. As it came with 2-22amp controllers to power 2- 1000w 48v motors. Seems odd they’d use such low amperage controllers for this bike or they are lying about the actual motors being 1000w each.
@@Freebird_67 i think it is the reaction time to full torque. So you do not get wheel spin before full traction occurs
@@Freebird_67 you see it more with front wheel motors
@@Freebird_67 is speed limit on P8 set to 100 that's what you need to change also I've seen set at 50 on so.e bikes is interpreted as 100 by controller also P14 is amparge set it higher possibly hope it helps you
Who knows wat error code 008 means and how to fix it?
Pretty sure that's a throttle error
I believe it’s a throttle error. Unfortunately I don’t know how to fix it
@ROBTAT2 what about 006
@@blessyess1629 E06 is normally a battery undervoltage error. Check your pack voltage.
No movement in motor .... so motor is broken .... check my comment on the video i put the link to pdf file of the manual in my comment
My lcd needs a 4 digit code why .
I don’t have a code
Me too.. any luck finding a code?
Try code 6666
@@MrD1ss666 try 6666
7777
866
I have a problem of b007 who knows how to restore to normal please
Hey did u ever figur out to reset back to factorie
I have a password .
What now?
This is so annoying long press too much, you don't have to keep saying it
The video is incomprehensible and worth nothing