HOW TO REPLACE SIDE MIRROR INSERTS FORD TRANSIT
Вставка
- Опубліковано 9 жов 2021
- please like this video :)
Facebook: / ghostlyrich
Twitter: / ghostlyrich
Link to mirror glass: amzn.to/3mrwjsY
This should work for installing new side mirror inserts on ford transit vans 2014 and newer. the one in the video is a 2015, i hope this helps you do it yourself quick and easy thanks again for watching.
Thank you for the video. Removing and replacing these mirrors are the first and last steps of replacing the broken clear turn signal cover.
Many thanks for this upload. Simple instructions and straight forward procedure. 👍
Easy peacey :) But after I had to force the mirror adjustment as it was out of range to adjust it correctly by using the motor. Also I did see now that my mirrors was heated, I did not remember that so I had ordered non heated mirror. Also the cables for the old heated mirror would not come of, so I had to cut them, pretty sure that is not the correct way to do it ;)
excellent instruction , thankyou so much 👍👍
Excellent and easy to understand
THANK U RICH VERY HELPFUL
Just done one, Dont forgot , Those spring tabs go inside those lugs as they're under tension to help grip,and keep glass in...
Is it the same for the smaller mirrors
Any idea how you change the smaller mirror below the one you changed
how can I replace the circular motor behind it? I damaged one of my vans motor when replacing it and now it won't move. I cant figure out how to remove it
Can you do this for the 2010 transit connect
Did you put the tabs back on the replacement? Are they heated mirrors? I didn't see any wires.
This van wasn’t equipped with heated option so I could not plug them in
@@ghostlyrich how do you get the tabs off the old mirror . You said to take them off but they aren’t coming off
What if I don’t have the old mirror ?
what do i do with the 2 clips my mirror came with?
Put them on the two clip points at the back of the mirror
should you use a plastic tool?
Th plastic tools have flex to them so usually your best bet
thanks for NOT showing how the two metal clips go in. :(