We did a site clearance on a site ready for tarmac, the site manager said any scrap we find we could keep. I dont think he expected us to pulll up miles of redundant high voltage cable with the 360. It took us days to strip it all best bonus we've had to date.
My yard would never let two different items on the scale at the same time. They also pick through everything. Like that bucket of brass they would dump it out and check each piece.
Well done lads. Interesting video. I am doing mainly removals but sometimes we have to do similar with what you have done so I totally understand you. New subscriber. 👍👍
When I was a kid whenever we were skint you could just donder thru a side door of this factory and walk past the few people there like you work there then fill a wheelbarrow up with aluminium bars and walk back out again. Heavy work but good money. Almost as good as when we had a working alarm for Tesco. Great days
Come fish down pompey mate, mate caught a 15lb bass the other week. Saw an 18lb pulled out last year. Some of the biggest bass in the country in pompey harbour… Wanna know what we catch those big bass on in the harbour… bread.
Loving the video!!! Are nuts and screws and bolts worth money if I have tuns off them I’ve been saving them up as I work with that sort of scrap?? Cheers in advance 👍🏾👍🏾👍🏾
Makes you wonder how much you'd have gotten if you stripped as much of that 99kg as the stripper would work on. I strip absolutely everything that my stripper can strip cleanly.( powercords are too flexible and get real prickly, drawing blood.) But I'm on a 1 tonne mission before I cash it in so am going all out with stripping wire, motors and transformers. With all the small unstrippable wire, I'm planning building a granulator so all copper can go top dollar.
How is that not all robbed lol, You buy t from a roofer plumber electrician lol ... Na only joking. I worked as maintenance at a hotel for about 6 years and accumulated a shit load of copper and cable from refurbs and rewires and stuffed it in an empty loft space. Problem is i left the place before weighing it in due to the covid lockdown. Wonder if its still there 🤔
Aww boys I'd of just give u that aswell 500 on top nice 2 n half hours drive lol 😆 I melt all my bits down and did give the blocks of copper out to lads like ur self's but now 😅 am asking 5er pmsl only joking like
The bits at the end that didn't weigh nothing??? should have gone back in the van as everything weighs something and it tells you a lot about the scrap yard scales???
@@thescraphunter6811 looking at the copper u got number 2 price heavy copper I.e any that’s dirty or painted goes as heavy. U had a load there that looked clean tube. If u cut that out u can weigh that as no1 clean copper.
@@thescraphunter6811 unusual my yard pays me more for clean copper tube no1. Painted or with brass or solder goes as heavy coper no2 so it’s with me sorting it out. And yes bright wire is the best. That’s at a uk yard EMR.
Another one handed bandit get a head cam you know what that is a, I'll check back in a couple of weeks if you still don't have one I won't bother you or watch your video's.
You r not scrappers. You have not striped the household. Down to dry bright.and your copper tube was mixed with brass.you could have had over a grand in the hand.cash.and it should have bean a 3 way split. Minus fuel for the van..I'll not be working with your outfit.iff you treat people like that.and thay don't get a fair share.
Calm down phill there was no brass on the copper and me and matt go half's on everything I was taking the piss Rick is matts son and we paid him his bit to the household is not worth stripping fir the price we get foe it as Is
We did a site clearance on a site ready for tarmac, the site manager said any scrap we find we could keep. I dont think he expected us to pulll up miles of redundant high voltage cable with the 360. It took us days to strip it all best bonus we've had to date.
My yard would never let two different items on the scale at the same time. They also pick through everything. Like that bucket of brass they would dump it out and check each piece.
Mate these videos are brilliant cant get enough of em🤣
Bum ... I was about to say the same thing ... more videos please Scrap Hunter... Gracias amigo, Javier from Houston, Texas USA 🙂
That's a lovely profit for a little bit of work! Gotta respect it 👍🏻
Great stuff lads, nice result on a Monday morning. Well done and fair dues.
Boom Great Video. I always weighed in when copper shot up to £1 a kg 20 years ago, subscribed for more videos and liked
Having some good luck with these paydays leading upto Christmas. It's not what you know, it's who you know 👏 can't beat a few contacts.
Good days work .. nice work life balance ..well done ..
Well done lads. Interesting video. I am doing mainly removals but sometimes we have to do similar with what you have done so I totally understand you. New subscriber. 👍👍
Just found this cool video keep it up
Watching this has made me want to buy a van and start doing scrap myself
When I was a kid whenever we were skint you could just donder thru a side door of this factory and walk past the few people there like you work there then fill a wheelbarrow up with aluminium bars and walk back out again. Heavy work but good money. Almost as good as when we had a working alarm for Tesco. Great days
Subscribed to your fishing channel now after forgetting last time 👍💚💛❤️
Thank you
Fair play mate I’d be taking the week off too nice little touch 👍🏻
Good deal!
Nice!♻️💪🏻👀
Nice profit
great watch mate
you really should have spent the extra time to separate the number 1 and number 2 copper. I think the price would have gone up a lot. nice haul guys.
Not that much difference between it tbh
Busted 11:57 sneaked in a bit of steel there with the copper 😂
😛😛😛🤫🤫🤫🤫
That was a nice bit
Nice bit of vornger chavey
Hahahaha, 56p for Matt!! Now that's some well earned cash.
Don't spend it all at once lad.
You got a better price for dry bright than I did last Friday. I got 5.40 a kg. But that's Christmas weigh ins for you
You were robbed..its £6
Nice
i carnt beleave the work that gose into prepping all the stuff
Good do there boys
When on scales clear it off each different metal you bring on...
They can fiddle that way..
Spend money to make money . Sometimes it pays of a lot better than other times
That should be split 3 ways guys you are a team
Come fish down pompey mate, mate caught a 15lb bass the other week. Saw an 18lb pulled out last year.
Some of the biggest bass in the country in pompey harbour…
Wanna know what we catch those big bass on in the harbour… bread.
Brought? Man I love scrap, I've got about 400kg of copper in my garage and I'm reluctant to scrap it.
Let me buy it off you
Nice amount there 👍🏻
Quick question I’ve got a copper water tank to run in. Should I take the insulation off it or is it not worth it?
Yes take it all off mate and cut the lid off
Some mate you are ! I bet you give him about 50 quid and the lad I bet u gave him 30
Take oaf my boy lol joking wicked videos fella
Can’t get the staff can ya 🤣
👍👏👏👏👏
Loving the video!!! Are nuts and screws and bolts worth money if I have tuns off them I’ve been saving them up as I work with that sort of scrap?? Cheers in advance 👍🏾👍🏾👍🏾
Yes mate it's all worth money dude
Cheers mate appreciate the reply 👍🏾👍🏾👍🏾
Is it worth striping singles
Better to have four hands then two hands
wear gloves lads , there will be a slashed hand soon
They have mens hands, hard working hands
@@vinniebullterrier6456 they still piss out blood when handling rusty old cookers ect
@@fishypie nO they dONt m8
Forget the gloves, wear hi-vis so people know your important!!
@@saltymemesmith haha how is that going to protect you dounut
Makes you wonder how much you'd have gotten if you stripped as much of that 99kg as the stripper would work on. I strip absolutely everything that my stripper can strip cleanly.( powercords are too flexible and get real prickly, drawing blood.) But I'm on a 1 tonne mission before I cash it in so am going all out with stripping wire, motors and transformers. With all the small unstrippable wire, I'm planning building a granulator so all copper can go top dollar.
Good on you mate but I fell stripping the small stuff I'll lose money I might do a video on that I think 🤔
Why not burn it pays the same money
Hi I as well do the exact thing I am trying to reach a tonne aswell is your tonne just number 1 or a tonne mixed with 1 and 2
@@duncanprice5798 no it doesn't
@@duncanprice5798 no it don’t
Do you have to take the brass fittings off the copper /??
Yes mate
What are singles
Mate how do you come across such good stuff never can find any1 who wants sell
Just lucky I guess
Well done guys 👍 did you keep any lead for fishing weights ?
What
@@simonmcmullen1129 not hard to do and saves a few sheckles
Just buy em
£870 is $1055 at the moment
Don’t u get more for copper pipe if u cut all the soldiered joints off it?
No mate get more of its shinny new
@@thescraphunter6811 get the brasso on it then, brings copper up like new!!!
Well done what the fish cha called
Fish Hunter UK
Whys that paperwork dated 14 Jan 2023
How is that not all robbed lol, You buy t from a roofer plumber electrician lol ... Na only joking. I worked as maintenance at a hotel for about 6 years and accumulated a shit load of copper and cable from refurbs and rewires and stuffed it in an empty loft space. Problem is i left the place before weighing it in due to the covid lockdown. Wonder if its still there 🤔
Aww boys I'd of just give u that aswell 500 on top nice 2 n half hours drive lol 😆 I melt all my bits down and did give the blocks of copper out to lads like ur self's but now 😅 am asking 5er pmsl only joking like
The bits at the end that didn't weigh nothing??? should have gone back in the van as everything weighs something and it tells you a lot about the scrap yard scales???
heads😂
Is worth about 1300€
9 hrs work there’s 3 of you 😂
£300 is worth only $360 now. Currency has gone to shite lol
I'd have stripped that wire even if I had to burn it
300 pounds is about 350 dollars maximum
😂😂😂
take plugs outa rads brass oops watch vidfirst lol
Y u didn’t sort your copper!
I did mate how do you mean
@@thescraphunter6811 looking at the copper u got number 2 price heavy copper I.e any that’s dirty or painted goes as heavy. U had a load there that looked clean tube. If u cut that out u can weigh that as no1 clean copper.
Colin Crane it's different for us here mate it's all one thing copper is copper that's that bud stripped wire ie bright wire is worth more
@@thescraphunter6811 unusual my yard pays me more for clean copper tube no1. Painted or with brass or solder goes as heavy coper no2 so it’s with me sorting it out. And yes bright wire is the best. That’s at a uk yard EMR.
Colin Crane oh really it makes no difference here sorry bud I didn't release you was in the UK
jeez i wouldnt work for less then 450quid a day
Bought*
Why take the week off, get back out there and make more money, If not somebody else will
We’re abouts you based
Medway in Kent mate
Too far from me Pal to take the scrap we get
56 quid ? You taking the piss 😂😂😂
Hey man u got a p.o box address??
No bud but if you want to send anything it can go to medway Tackle-Supplies in Gillingham Kent dude addressed to the fish hunter 😉
@the scrap hunter I'll see about sending you a block of brass when do next melt
What a double act you guys are. Poor Matt!!
You guys really need to wear gloves , I used to be in the tatter game it’s hard work and your hands can get ripped to bits
Don't you strip the cable I would re value
Some of it we do but the 3 core stuff just isn't worth it buddy
£300 is $360 bro
I don't know why he bothers to try and convert as it's always mega wrong
Pretty funny though. £800 so that like $1,300,000
Why Don't you pay your mate proper money ffs
Lol clearly I was taking the piss mate we go half's after the fuel is taken
Is worth about 3000€
$500 ain’t £300
i don’t think it’s fair on matt he gets the odd need a new mate mate
It was only a joke mate matt gets half of everything after fuel cost
I hope you haven’t paid cash for that 😊 you do know it’s illegal don’t you 👮♂️.
Yep same as collecting scrap before 9am and after 5 but I still do I also don't use a seat belt and regularly use my phone driving but hay ho 🤣
Bright £5.80 a kg
I've 70kg of copper welding tips, much would I get ? 100 quid
I’ll give you £200 for it if you want 👌
70 x £5.80 bud 350 quid ish that's what my yard is paying
About 620 to 655
Is that all he gets £56 🤣
£56 that's all you're giving him he needs to find a new job
Another one handed bandit get a head cam you know what that is a, I'll check back in a couple of weeks if you still don't have one I won't bother you or watch your video's.
🤣🤣🤣🤣 I have one Rob but there a pain in the arse so I wouldn't bother checking back my phone dose me just fine
You r not scrappers. You have not striped the household. Down to dry bright.and your copper tube was mixed with brass.you could have had over a grand in the hand.cash.and it should have bean a 3 way split. Minus fuel for the van..I'll not be working with your outfit.iff you treat people like that.and thay don't get a fair share.
Calm down phill there was no brass on the copper and me and matt go half's on everything I was taking the piss Rick is matts son and we paid him his bit to the household is not worth stripping fir the price we get foe it as Is