How to Build a Dock with Dock Pontoons
Вставка
- Опубліковано 13 жов 2024
- www.dockpontoonscanada.com
For service in Northwestern Ontario (from Thunder Bay to Winnipeg) please call 807-227-2154 or email info@clarksresorts.com.
I have been in the resort business for over 20 years, and like any other resort owner, dock maintenance is one of the biggest challenges we face. Our operation consists of 2 Drive-In Resorts and over 20 Fly-In Outpost Camps, so we have a lot of docks to deal with. We have used the blue Styrofoam billets for years for flotation, and after a short period of time the foam becomes saturated with water, as well as the animals chew holes in it. It can also crack up when subjected to prolonged strong winds. When using Styrofoam or plastic billets for flotation, you have to make sure you build a structure strong enough to hold in the flotation and keep everything together in rough waters.
When using Dock Pontoons, it is the opposite idea, as your pontoons give you the strength to keep the dock rigid and because they are round, there is very little resistance to the wave action. All you have to do is build an inexpensive and light deck to complete your dock. There is no expensive 2 x 10 material required, and the pontoons keep your lumber out of the water to ensure extended life of your dock. These docks are very easy to assemble, taking around 2 hours per dock at the most. You can build any configuration you want with ease, using as many pontoons as you want. The cost of the pontoons may be a little more, but when you consider the ease of construction and the little amount of lumber needed, it is definitely the way to go for us.
local suppliers will most likely carry end caps for that black corrugated HDPE pipe. Sometimes they use them in construction for temporary caps. That pipe typically comes in 20 ft lengths.
I like the fact you Can have a nice long dock without jetting in big wooden poles . This totally changes my plan to not use jetted wooden poles
Is this system strong enough to hold a 14m x 5m houseboat on top?
Can you add water to semi ballast the dock. Semi ballasted floats dramatically increase stability. ?.
Plastic Lumber would be a great use here!
Plastic Lumber too flexible for the structure but would be great for the top
Plastic lumber might be a good idea for the flooring on a floating dock. I used it for the floor on a fixed dock, disaster. When the water level rose the plastic lumber floats and pulled the 6X6 posts up out of the bottom and now is all wonky! I will need to remove it and build a dock like this one. Much better design.
HI..I"m in Texas.. love the design and simplicity.. question.. how do you cap the ends of the tubes?
with a cap
Hi could you use these on a pontoon boat with outboard motor? For cruising?
the same factory build the tube they got those caps
That ADS pipe is thin and those cables will wear holes in the pipes in wave action. How are they sealing those caps onto those pipes ? Most sure way is to foam the insides of the pipes. One hole and it fills with water and sinks.
Yup. Fill with foam is a must.
Do you need to build those supports that you have attached to the U-bolts? Could you not just space the joists so that they are resting directly on the floats? similar to what you'd see if you were using barrels? then the weight would be spread the entire length of the float and on both sides of the float. What do you think?
Amazing video! Thanks for sharing
How much weight will one section hold up?
what did you use to seal the barrels?
Thanks for sharing can u share the info were to buy the tube and the end cab
What size around are the culverts, the end caps, how are they attached so the lake ice doesn't detach them from the culvert as i will be letting them freeze in during winter. also how stable are they, i've walked on other docks made of plastic pvc pipe and sank the corner when 2 adults were standing together.
Hi there! Really like your idea....and i am wonderring, do you need to silicone the end caps before inserting them ? 😀
Hi I came a cross your video using pvc pipe to make a dock,I need to know about using this system to float a house of 16 x 32 feet.It will be on a lake most of the year until, the Ms.river gives us a high water let run up and down on collared pole.
dell rand - Did you build the lake house with the ability to float as you mentioned? Looking for ideas about this with the increasing floods and being on a lake. If you have any info, would appreciate it!! Thanks.
How you cap the drain tiles?
Is it compulsory to use tubes under woods? Can't we just use thick wood?
What diameter is the ready rod
How much weight can I put on it
Hi I sent you message 5 days ago about useing these pvc pipes to float a camp 16 x 32 ,if you sent me an answer I did not get it. Also I planed to use 3 runs of 24 inch or what ever you would recommend ,thank you for anything you could share with me.
How do you get the poles into the sand?
Thanks for the video. Lots of good clear details. I will have to try to find where you got those pontoons. They look like culvert pipe with closed ends.
+Jerry Fleming That is exactly what they are! These pontoons are awesome and they make beautiful & sturdy docks. If you live anywhere between Winnipeg, MB and Thunder Bay, ON... you can buy them from us! Otherwise, visit www.dockpontoonscanada.com/ to find a dealer near you. Thanks for commenting on the video!
I didn't catch what is used to plug the pipe ends. Anyone know?
We are wondering how your dock is secured. Do you use anchors & chains? Or pipes to secure the dock? Thank you for anyone who can answer!
Holly, at the end of the Video he explains about pipes that are screwed into the lake bottom to keep the Dock in place. :)
Where do you get the hdpe that size?
No the property was bought in 1972 no one had ever seen water levels like we have today .Since the purchase the corp of engineers has built a lot of riprap wiers on both sides sides of us,the river has filled in between them with sand and the water has no place to go but up causing floods every year. But this is progt
Thenk you very much ! ☺👍
i was curious if those would work for a house boat ?
Pi x R x R X L = 3.14 X 18" x 18" x 16ft. About 1 ton displacement ! I do not know the weight of the tube. I am planning to do the same thing using recycled plastic bottles ie; coke bottles that are causing so much harm in our seas.
I don't see hangers is it because they may rust
brother this design wont hold up on lakes with waves. use the blue barrels
Thank You.
Thanks bro
Qual nome do tubo preto ?
where did you purchase those black flotation tubes?
We actually sell them, but only here in the Northwestern part of Ontario. You can find a dealer near you if you visit www.dockpontoonscanada.com.
Thank You
clarksresorts
some diagonal cables...
👍👍👍👍👍