You might want to watch this video is slow motion, go to settings(the little sprocket) and select speed 0.25 then watch how she makes this, it helps! Thanks for making this video, im making this for a birthday gift.
Thank you kindly! Yes, to curve the lid, I curled it around a cup while it was still hot, because it was hot to touch. Then I lined it up the way I wanted on the rest of the chest and held it until it was completely cooled.
just getting my kids into this and they love it and watching your videos have given us so many ideas thank you:) just a question if I may where do you get that large pegboard from? Thank you:)
About how many beads do you think you used for each color????? I'm wanting to start trying more projects and this would be. Great bday gift for my mom lol
So I've been doing it wrong with how to iron out the perler beads? I'm not sure what you did with the Tape and making the holes but damn... That's a lot to take in. I'm learning and I just subbed so I don't go crazy.
Nice work! I wonder how difficult it would be to go ahead and make the large key as a separate object itself? I think that would be a cool followup video! :D Oh, and if you make the large key, be sure to hold it up high above your head after opening the chest, hehe. ;)
I've just been introduced to perler beads and I got some to make this. I was wondering; When you were bending the top piece (bendybend) was it very hot? Cause honestly, I can't bear hot temperatures and I was wondering if I should do that part with gloves or something. (But you did them with bare hands so--)
+Fandom “KARKAT VANTAS” Trash it was really hot, so be careful! Gloves would work wonders for that bit! I would recommend gloves to anyone for that part :)
Wicked awesome! Is this possible with a 3d pen? I will keep attempting until I pull something melted plasticky off . May be a blob but will be my blob LOL ! seriously coolest thing I've seen
Thank you! I went to the container store and bought a hobby shelf with tons of drawers! I just pull out the drawers I want to use and put them back when I'm done :)
Hi SpeedBead! I was just wondering if you could give us the exact bead measurements or each piece or a template maybe? I'm just starting to get into perler beading and wanted to make this.
Thanks for the tutorial! It was very helpful! Btw, did you use special beads that are more fixable? Or did you just used standard beads? Just curious. :) I like how you added the "Da na na NAAAA!" at the end. Gotta love that opening chest tune from the Legend of Zelda. :)
I think this would be an awesome way to present my girlfriend's bday present, but I'm having trouble telling how many beads are in each piece. Do you have a pattern somewhere?
This is amazing!!!! Congratulations!!!! Do you have a Facebook page or a blog with the patterns or the step-by-step instructions? Now I've seen it, I must make it!!!
I made a Facebook page yesterday, actually! I only have the template for the the mini version of this for now! Problem is they take a long time to make! If you can pause the video on the design you can match it on your own pegboard- just copy what you see. :) it's the same as a written template!
SpeedBead Thank you! I'm following your page. Congratulations! Btw, I hope hope you can help me with some doubts I have. Why do you use the masking tape method? How does that improve the result in comparison with ironing directly on the board? And do you always make holes in the masking tapes? Thank you very much for your help
Awesome thank you! The masking tape method prolongs the life of your peg boards! The peg boards won't be heated and warped and they'll stay perfect with this method. When you use the masking tape method, you always have to poke holes in the tape or else air will get trapped inside the beads and cause the melted plastic to pop. You'll end up with big holes in your final product if you don't let the beads breathe by poking holes in the tape.
Quick question, how exactly do you peel the beads off of the pegboard? I can see you using tape but I'm wondering what kind are you using and then what do you normally use to make sure the beads don't bend while your heating them with the iron?
I use masking tape and then make sure there's air holes poked in the back before I iron. (look up how to use the masking tape method to make sure you do it correctly.) As for bending while you iron, you can put a heavy book on the piece you're not ironing to make sure they don't bend out of place as you go.
Ok. I'm planning on making a Mario coin box and various coasters so I need to make sure the beads don't bend. For the coin box, once I finish ironing a side then just place a heavy book on top of it?
Good idea! When you put the masking tape on, push on it a bunch to make sure it sticks! a few beads may come off but it's not the end of the world. Just be patient with it :)
Aaron Clarke Ah sorry about that! What I did was, I ironed both sides and then laid it over a cup to bend it while it was too hot to touch! When it was cool enough for me to touch, I held it into place just with my fingers until it was ENTIRELY COOLED. Took about ten minutes of waiting for it to be completely cool. Make sure you check your shape with the rest of the box so that the lid will sit right. Hope that helped!
I just made all the parts and put them together. But I had to take them out for a moment and when I went to put them back together, none of the sides would snap back like they did before. Any suggestions?
try swapping the sides and seeing if those go together any better? like switch the pieces around since they're all identical and see if any go better together
I just finished this but the top doesn't quite fit! It comes a bit short i think, or i just didn't bend it correctly. Can you suggest a way to fix it? I sure the measurements are correct from your video.
Wax paper would not be a good idea! the glossy side of the paper could melt to your iron or piece. Parchment paper is a better choice. It is as easy to come by as wax paper :)
hola que tal me encanto tu cofre, me me interesa saber que tanto material te llevas para hacer uno cofre así que tantos hama beads de cada color necesitas por fa me ayudarías mucho y felicidades la verdad te quedan geniales :D saludos
For the longest time I have been wanting to customize my floor lamp to make it look like a piranha plant from Mario BRos. I know that I want to use a plastic pot for the tube but I just cant figure out how to do the piranha on the top so the bulb still emits light pointing up but still making it look like the piranha is opening its mouth. After finidng your videos I think you could help me with a cool tutorial on how to do a 3d perler bead piece for a lamp that can cover the current plastic cover. Could you help me out?
Sono Giulia dì Roma. Il progetto e' bello, ma il tutorial non permette di realizzarlo perche' il filmato e' troppo veloce E' possibile avere lo schema cartaceo ? Aspetto risposta. Cordialmente Giulia
the best is the "tararaaa" ending i laugh so hard. this is amazing
LOL glad someone noticed it XD
Please don't stop uploading this awesomeness
+Carlee Vondire XD I agree
HOLY GUACAMOLE! It's like you put the pieces together like legos! Excelent work, and very creative!
ha ha! Thank you very much!! Glad you enjoy it :D
That's so cute!
QDCrafts Thank you :D
◃┆◉◡◉┆▷
Excellent work, must be so rewarding to finish!
You might want to watch this video is slow motion, go to settings(the little sprocket) and select speed 0.25 then watch how she makes this, it helps! Thanks for making this video, im making this for a birthday gift.
That is very creative. I loved this tutorial. Keep them coming.
I don’t know much about Zelda but that looks awesome
That is really awesome. Well done!
You are a speed bead master.
this is so cool!
Krezpipata Eeep! thank you!
your videos are awesome
That s so cool
THATS AMAZONG
THEES. EES. AWESHUMMMMMMMMM.
I totally want to go out and buy ALL the beads now.
lol! dooooo iiiittt!
Honestly, I clicked on the video because I was curious how you curved the lid of the chest. Nice idea and turned out great
Thank you kindly! Yes, to curve the lid, I curled it around a cup while it was still hot, because it was hot to touch. Then I lined it up the way I wanted on the rest of the chest and held it until it was completely cooled.
Awesome, wow!!!
Thank you!!
Amazing, looks nice
thank you!!! :D
*dribble* ... looks so good, nice short vid
FiloPixie Thank you so much!! :D
Fantastic！
just getting my kids into this and they love it and watching your videos have given us so many ideas thank you:) just a question if I may where do you get that large pegboard from? Thank you:)
+Daniel R Yay so glad to hear that!
I got the giant pegboard from Joann Fabrics :)
+SpeedBead oh dude that place is good I go there to get all my supplies!!!!
I love it
I just found out about these perler beads! -_- But anyway, great tutorial. Straight to the point and entertaining. New subscriber!
U are so talented that's amazing
Aw wow thank you so much!!!! :D
Epic
AWESOMENESS
Im so gonna try and make this for my dad for his birthday
+Tori Uchiha He will love it! :D
Then I hope he likes it!!
that is damned amazing !
+SpeedBead PLEASE never stop making videos ;u;
About how many beads do you think you used for each color????? I'm wanting to start trying more projects and this would be. Great bday gift for my mom lol
so cool it would have taken alot of time wow amazing!
That helped me so much!
yay!! glad to help :D
fantastic!!!!!!!
This is amazing!
So I've been doing it wrong with how to iron out the perler beads? I'm not sure what you did with the Tape and making the holes but damn... That's a lot to take in. I'm learning and I just subbed so I don't go crazy.
this is amazing xD
DA DA DA DAAA!!! i love it
that's amazing! !!!!!!
Nice work! I wonder how difficult it would be to go ahead and make the large key as a separate object itself? I think that would be a cool followup video! :D Oh, and if you make the large key, be sure to hold it up high above your head after opening the chest, hehe. ;)
Awesome!!!!!!
I've just been introduced to perler beads and I got some to make this. I was wondering; When you were bending the top piece (bendybend) was it very hot? Cause honestly, I can't bear hot temperatures and I was wondering if I should do that part with gloves or something. (But you did them with bare hands so--)
+Fandom “KARKAT VANTAS” Trash it was really hot, so be careful! Gloves would work wonders for that bit! I would recommend gloves to anyone for that part :)
Wicked awesome! Is this possible with a 3d pen? I will keep attempting until I pull something melted plasticky off . May be a blob but will be my blob LOL ! seriously coolest thing I've seen
Once you iron the edges, it never breakes?
ah, thank lordy loo I'm not the only one who says *you're done son*
@speedbalk how did you get you're top layering piece to bend like that?.
probably bended it while it was still warm.
I love your video so much!! Congratulations I was wondering where did you get those containers that you have your peeler beads in?
Thank you! I went to the container store and bought a hobby shelf with tons of drawers! I just pull out the drawers I want to use and put them back when I'm done :)
Awesome job what colors did you use?
Black, Dark Brown, Light Brown, Yellow, and White :)
And yellow and tan on the key
Hi SpeedBead! I was just wondering if you could give us the exact bead measurements or each piece or a template maybe? I'm just starting to get into perler beading and wanted to make this.
Yes I would like that too please, like a close up of the bead layout thank you ☺️
+Cress The Alpha Just click full screen.
I'm going to get perler beads soon, except I want to know what that thing is you put on top of them before you iron them?
masking tape and perler iron paper or parchment paper
Very cool. =)
Thank you!!
Thanks for the tutorial! It was very helpful! Btw, did you use special beads that are more fixable? Or did you just used standard beads? Just curious. :)
I like how you added the "Da na na NAAAA!" at the end. Gotta love that opening chest tune from the Legend of Zelda. :)
I think this would be an awesome way to present my girlfriend's bday present, but I'm having trouble telling how many beads are in each piece. Do you have a pattern somewhere?
This is amazing!!!! Congratulations!!!! Do you have a Facebook page or a blog with the patterns or the step-by-step instructions? Now I've seen it, I must make it!!!
I made a Facebook page yesterday, actually! I only have the template for the the mini version of this for now! Problem is they take a long time to make! If you can pause the video on the design you can match it on your own pegboard- just copy what you see. :) it's the same as a written template!
SpeedBead Thank you! I'm following your page. Congratulations!
Btw, I hope hope you can help me with some doubts I have. Why do you use the masking tape method? How does that improve the result in comparison with ironing directly on the board? And do you always make holes in the masking tapes? Thank you very much for your help
Awesome thank you!
The masking tape method prolongs the life of your peg boards! The peg boards won't be heated and warped and they'll stay perfect with this method. When you use the masking tape method, you always have to poke holes in the tape or else air will get trapped inside the beads and cause the melted plastic to pop. You'll end up with big holes in your final product if you don't let the beads breathe by poking holes in the tape.
SpeedBead Thank you very much for explaining it to me!!!! :)
awesome
hi I was wondering where you got your board from. The biggest I can find is 29 by 29 pegs. Thank you.
+Beth Jackson-D'Zacchaeus I got it from Joann fabrics :)
+SpeedBead ahh ok thank you.
amazingggggg!!!!
Quick question, how exactly do you peel the beads off of the pegboard? I can see you using tape but I'm wondering what kind are you using and then what do you normally use to make sure the beads don't bend while your heating them with the iron?
I use masking tape and then make sure there's air holes poked in the back before I iron. (look up how to use the masking tape method to make sure you do it correctly.) As for bending while you iron, you can put a heavy book on the piece you're not ironing to make sure they don't bend out of place as you go.
Ok. I'm planning on making a Mario coin box and various coasters so I need to make sure the beads don't bend. For the coin box, once I finish ironing a side then just place a heavy book on top of it?
Yeah! Heavy books do the trick. Make sure your piece is entirely cooled before you remove the book. Sometimes it takes 10 minutes or so.
Thank you so much for your advice! I'm going to give the masking tape method a shot to make a coaster before working on the coin box
Good idea! When you put the masking tape on, push on it a bunch to make sure it sticks! a few beads may come off but it's not the end of the world. Just be patient with it :)
This is SO awesome! Where can I find the pattern to follow?
looks frustraiting but i love it
+creamycookieAJ Haha, it's all worth it in the end :)
+xxxlottie Whaaat , you think it looks frustrating ? Perler bead art brings me pleasure.
Cool
Can you put up normal speed version please I can't see how you made the top of the chest curved great video anyway thanks
Aaron Clarke Ah sorry about that! What I did was, I ironed both sides and then laid it over a cup to bend it while it was too hot to touch! When it was cool enough for me to touch, I held it into place just with my fingers until it was ENTIRELY COOLED. Took about ten minutes of waiting for it to be completely cool. Make sure you check your shape with the rest of the box so that the lid will sit right. Hope that helped!
Haha that chest opening FX at the end xD Nice tut :D can i find the patterns anywhere? Thanx :D
I love your vids please make one on a 3d ghastly from pokemon
Lolled at "tadadadaa" :P
Could you maybe put pictures of the finished portions at the end of the video? It'd really help us for actually making it.
I just made all the parts and put them together. But I had to take them out for a moment and when I went to put them back together, none of the sides would snap back like they did before. Any suggestions?
try swapping the sides and seeing if those go together any better? like switch the pieces around since they're all identical and see if any go better together
I tried that already, it doesn't work D:
was the last price melted over a bottle?
What site do you use to know the exact height of each side ???
I just finished this but the top doesn't quite fit! It comes a bit short i think, or i just didn't bend it correctly. Can you suggest a way to fix it? I sure the measurements are correct from your video.
Shoot! Maybe try reheating it and bending it more sharply! The curve should be pretty snug to the sides, even inside a little bit. See if that helps!
set your iron to a warm setting as opposed to HOT; you don't want to melt the beads more- just heat it up so its pliable again.
SpeedBead I'll try that. If I mess it up more I might re-do the top and make sure it fits. Probably making it a bit longer :)
That'll work too, but it's such a shame to have to waste the time and beads!! I'm sorry! I hope reheating it works for you.
+speedbead are you left handed I've never seen a video with a left handed person make things with perler beads
WHOA
I have a questioncan you use wax paper to iron it instead?
Wax paper would not be a good idea! the glossy side of the paper could melt to your iron or piece. Parchment paper is a better choice. It is as easy to come by as wax paper :)
SpeedBead thnx
hola que tal me encanto tu cofre, me me interesa saber que tanto material te llevas para hacer uno cofre así que tantos hama beads de cada color necesitas por fa me ayudarías mucho y felicidades la verdad te quedan geniales :D saludos
I'm still confused on how you did the top and got it to mold the way you wanted.
For the longest time I have been wanting to customize my floor lamp to make it look like a piranha plant from Mario BRos. I know that I want to use a plastic pot for the tube but I just cant figure out how to do the piranha on the top so the bulb still emits light pointing up but still making it look like the piranha is opening its mouth. After finidng your videos I think you could help me with a cool tutorial on how to do a 3d perler bead piece for a lamp that can cover the current plastic cover. Could you help me out?
im sure the heat coming off the lamp wouldnt be good with the perlers
Ho dios mio eso es hermoso deberias de benderlos porlomenos a 350 pesos cada uno cuanta creatividad sigue asi 8) ...
I'm still confused on how you make the top part curved like that, could you explain?
While it´s still hot, you bend it like that, then let it get cold while bent.
+Royal Fenikkusu that's right! Thank you! :)
what size was that jar you used? ;[
Belloooo☺
Thank you!
what do you use to put the beads in place?
tweezers
niiiiice
I will try this out someday, but as a piggy bank.
How do you make that it so nice!😊
That. Was. Mesmerizing. Seriously.
heheh thank you!!
what is the type of paper you used to iron it called?
+Genesis Molinares You can use any type of baking paper, it's just so that the beads don't stick to the iron :D
Wow
What was your ironing method?
Limenia Iraki I used the masking tape method for this one!
what did you use to apply the beads please reply
They're these little perler bead tweezers I got in a kit ages ago! Unfortunately they broke, but I found more online! :)
ok
Needs a open/close mechanism. But i like it 💣💣💣
Sono Giulia dì Roma.
Il progetto e' bello, ma il tutorial non permette di realizzarlo perche' il filmato e' troppo veloce E' possibile avere lo schema cartaceo ?
Aspetto risposta.
Cordialmente Giulia
Zelda ❤️ ficou massa
So cool so I'm guessing you could put your stuff In it
Miki STEELE Yeah! Right now it's just holding little baggies for me to put perler beads in XD
Lol very cool
I'm making this and it takes forever D:
Patience, my friend!
are you done yet
What's the music? :3
I also wants to know the name of the first music piece. Thanks
Cool 😎😎😎😎😎😎😀😀😀😃😀
how did she bend the beads
how much beads were use?!?!
why do you tape it before ironing?
To hold the beads in place after taking them off the peg board.
Cool can u make something minion themed
Who else thought it was life size from the thumbnail?
Wait! This is the music from CeaveGamings Mario Maker vids!